| View previous topic :: View next topic |
| Author |
Message |
iangreenhalgh1
 Joined: 18 Mar 2011 Posts: 15679
Expire: 2014-01-07
|
 Posted: Tue Aug 28, 2012 3:32 pm Post subject: Canon EOS 450D replacement focus screen issues |
|
 Posted: Tue Aug 28, 2012 3:32 pm Post subject: Canon EOS 450D replacement focus screen issues |
|
|
iangreenhalgh1 wrote:
I bought a replacement split-screen for my 450D as the original screen is useless for focusing manually.
I've installed it correctly, it's definitely seated properly and the right way up (will only go in one way) but it appears to not work properly.
When the two halves of the image in the central split screen are properly aligned, the image is way out of focus.
Anyone else had this issue with replacement screens? _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Back to top |
|
 |
Nisseliten
 Joined: 26 May 2012 Posts: 332 Location: Sweden
|
 Posted: Tue Aug 28, 2012 3:37 pm Post subject: |
|
 Posted: Tue Aug 28, 2012 3:37 pm Post subject: |
|
|
Nisseliten wrote:
I did for my 550D, dual 45 degree ones I ordered of ebay. Both went in the trash unfortunately, can't recall the name.
I did have a travor 180 degree single split prism first, it was spot on, but the 180 line was mostly in the way I found, so I switched back to the original. _________________
DSLR: Canon 550D, Panasonic DMC-GF3
SLR: Leica R3mot electronic, Leica R4s, Leica R4mot electronic. and more.
Medium Format: Many.
Lenses
Leica: 19/2.8, 35/2, 35/2.8x2, 50/2, 60/2.8 macro, 90/2, 90/2.8, 180/3.4, 250/4, 500/8 T-Noflexar 400/5.6
Other: When will it end?!
Canon: 50/1.8, 70-200 f4 IS
|
|
| Back to top |
|
 |
iangreenhalgh1
 Joined: 18 Mar 2011 Posts: 15679
Expire: 2014-01-07
|
 Posted: Tue Aug 28, 2012 4:29 pm Post subject: |
|
 Posted: Tue Aug 28, 2012 4:29 pm Post subject: |
|
|
iangreenhalgh1 wrote:
I think I'll just sell my EOS, not been impressed with it at all, IQ is crap compared o me NEX-3 and NX100. I knew an older sensor wouldn't be as good but it's a long way behind in dynamic range, fine detail and noise.
The Canon lenses for it I've tried have not been good either, wasted a fair bit of money on those.
Not being able to use manual lenses with it is the final nail in the coffin.  _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Back to top |
|
 |
Nisseliten
 Joined: 26 May 2012 Posts: 332 Location: Sweden
|
 Posted: Tue Aug 28, 2012 4:38 pm Post subject: |
|
 Posted: Tue Aug 28, 2012 4:38 pm Post subject: |
|
|
Nisseliten wrote:
I am quite happy with my 550D, tho the 450D is quite a bit older.
I use alot of MF lenses on my EOS, only thing I can't use are pretty much rangefinder lenses and konica, tho the glass adapter for MD is not really good. Otherwise I have adapters for pretty much every mount. _________________
DSLR: Canon 550D, Panasonic DMC-GF3
SLR: Leica R3mot electronic, Leica R4s, Leica R4mot electronic. and more.
Medium Format: Many.
Lenses
Leica: 19/2.8, 35/2, 35/2.8x2, 50/2, 60/2.8 macro, 90/2, 90/2.8, 180/3.4, 250/4, 500/8 T-Noflexar 400/5.6
Other: When will it end?!
Canon: 50/1.8, 70-200 f4 IS
|
|
| Back to top |
|
 |
marty
 Joined: 09 Apr 2009 Posts: 767 Location: Italy
|
 Posted: Tue Aug 28, 2012 5:02 pm Post subject: |
|
 Posted: Tue Aug 28, 2012 5:02 pm Post subject: |
|
|
marty wrote:
Howdy, there.
A tiny difference in thickness compared with original and won't focus as the the focus plane is shifted. In some cases shimming can do the trick. I can't be more specific, but it's a well known issue and has been discussed. I don't know specifically this camera and lenses so cannot comment on their performance.
Cheers, M. _________________ Canon FD
Bodies: AT-1, A-1, T-90
Lenses: nFD 20mm f2.8, 24 f2.8, 28 f2.8, 35 f2, FD 50 f1.8 S.C., 85 f1.8, 100 f2.8, 135 f2.8, 200 f4, 300 f4
|
|
| Back to top |
|
 |
peterqd
 Joined: 28 Feb 2007 Posts: 7449 Location: near High Wycombe, UK
Expire: 2014-01-04
|
 Posted: Tue Aug 28, 2012 5:06 pm Post subject: |
|
 Posted: Tue Aug 28, 2012 5:06 pm Post subject: |
|
|
peterqd wrote:
Ian, the thickness of the replacement screens is a little less than the OEM Canon ones I think, so they need to be adjusted. It can take several goes and needs a bit of patience. You have to experiment to get it right.
As you look through the mount, there should be a thin brass shim between the screen and the frame. This adjusts the distance between the mirror and the screen and if it isn't spot on, when the focus in the viewfinder is correct it will be wrong on the sensor. I can't remember which way round, but I think not enough shim thickness causes front focussing and too much shim thickness causes back focussing. You can check this by taking a picture looking along a tape measure. If you focus on a definite point on the measure, you can see in the resulting picture whether your camera is front or back focussing.
I had to increase the thickness of the shim in my camera. You can buy a set of shims of different thicknesses from Canon (they call them "washers"), but I just used two tiny pieces of 3M Magictape, one on each side of the shim.
There are several threads discussing this. I was guided by Rick Oleson's instructions.
http://forum.mflenses.com/backfocus-with-split-screen-t15582.html _________________ Peter - Moderator |
|
| Back to top |
|
 |
iangreenhalgh1
 Joined: 18 Mar 2011 Posts: 15679
Expire: 2014-01-07
|
 Posted: Wed Aug 29, 2012 9:52 pm Post subject: |
|
 Posted: Wed Aug 29, 2012 9:52 pm Post subject: |
|
|
iangreenhalgh1 wrote:
This is front focussing by about 5m so it's gonna need a lot of shimming. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Back to top |
|
 |
visualopsins
 Joined: 05 Mar 2009 Posts: 11698 Location: California
Expire: 2027-07-11
|
 Posted: Wed Aug 29, 2012 10:14 pm Post subject: |
|
 Posted: Wed Aug 29, 2012 10:14 pm Post subject: |
|
|
visualopsins wrote:
At what focal length and at what distance?
Here's a handy chart showing relationship between shim thickness and front/back focus: http://farm4.static.flickr.com/3354/4626297720_75252d6c29_o.png
Note that using the widest angle lens you have to calibrate focus screen is most accurate. _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Back to top |
|
 |
peterqd
 Joined: 28 Feb 2007 Posts: 7449 Location: near High Wycombe, UK
Expire: 2014-01-04
|
 Posted: Thu Aug 30, 2012 12:47 am Post subject: |
|
 Posted: Thu Aug 30, 2012 12:47 am Post subject: |
|
|
peterqd wrote:
| iangreenhalgh1 wrote: |
| This is front focussing by about 5m so it's gonna need a lot of shimming. |
Is that all you've got to say? No "thanks for the advice"? _________________ Peter - Moderator |
|
| Back to top |
|
 |
hoanpham
 Joined: 31 Jan 2011 Posts: 2575
Expire: 2015-01-18
|
 Posted: Thu Aug 30, 2012 9:30 am Post subject: |
|
 Posted: Thu Aug 30, 2012 9:30 am Post subject: |
|
|
hoanpham wrote:
I spend 4 hrs with my 400d and was about to give up.
On the last try, i discover my mistake: the focus screen must be plan with the holder, not just click in. I installed it wrongly and had it slightly disalign.
Your distances seems like you have removed the metal spacer/shim, or flipped side, or something in the way. It should not be as much. The 'washers' have precise thickness. Unless you know exact which, go for a set.
and use many lenses to test/calibrate. wide open, at minimum focua distance first. start with a fast fifty, then medium tele and other.
image quality of my 400d and yours may not justify for the extra hrs. |
|
| Back to top |
|
 |
visualopsins
 Joined: 05 Mar 2009 Posts: 11698 Location: California
Expire: 2027-07-11
|
 Posted: Thu Aug 30, 2012 10:18 am Post subject: |
|
 Posted: Thu Aug 30, 2012 10:18 am Post subject: |
|
|
visualopsins wrote:
| hoanpham wrote: |
| [...]and use many lenses to test/calibrate. wide open, at minimum focua distance first. start with a fast fifty, then medium tele and other.[...] |
That is good advice -- use fast fifty to get calibration close at first.
However, use fastest wide angle in native mount (Canon) lens to calibrate. When wide angle gives correct infinity focus, all other focal lengths will be most accurate. Because tolerances for wide angle is much less than for telephoto. Otherwise, telephoto may look accurate, while wide angle will not be accurate yet. _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|