| View previous topic :: View next topic |
| Author |
Message |
jessh
Joined: 16 Jul 2012 Posts: 3
|
 Posted: Mon Jul 16, 2012 7:18 am Post subject: Looking for K to EOS adapter of correct thickness |
|
 Posted: Mon Jul 16, 2012 7:18 am Post subject: Looking for K to EOS adapter of correct thickness |
|
|
jessh wrote:
I purchased a K to EOS adapter from a reputable seller on ebay but it seems that it is too thin. It focuses past infinity. I have found reviews of just about all of the ones I can find saying basically the same thing or that they are too thick and can't focus to infinity. Does anyone make one of the correct thickness so my focus marks will be correct and I can simply set my lens to infinity to focus at infinity?
Thanks,
Jess |
|
| Back to top |
|
 |
maxcastle
 Joined: 14 Apr 2012 Posts: 492
|
 Posted: Tue Jul 17, 2012 4:01 pm Post subject: Re: Looking for K to EOS adapter of correct thickness |
|
 Posted: Tue Jul 17, 2012 4:01 pm Post subject: Re: Looking for K to EOS adapter of correct thickness |
|
|
maxcastle wrote:
| jessh wrote: |
| It focuses past infinity. |
You could say it was a buzz lightyear then i.e. "To infinity... and beyond!"  _________________ my humble blog is
http://rolotomassi.blog.com/ |
|
| Back to top |
|
 |
SonicScot
 Joined: 01 Dec 2011 Posts: 2697 Location: Scottish Highlands
|
 Posted: Tue Jul 17, 2012 5:54 pm Post subject: Re: Looking for K to EOS adapter of correct thickness |
|
 Posted: Tue Jul 17, 2012 5:54 pm Post subject: Re: Looking for K to EOS adapter of correct thickness |
|
|
SonicScot wrote:
| jessh wrote: |
I purchased a K to EOS adapter from a reputable seller on ebay but it seems that it is too thin. It focuses past infinity. I have found reviews of just about all of the ones I can find saying basically the same thing or that they are too thick and can't focus to infinity. Does anyone make one of the correct thickness so my focus marks will be correct and I can simply set my lens to infinity to focus at infinity?
Thanks,
Jess |
As I was told when I first joined this forum, it's better to focus beyond infinity than to not reach it at all.
These adapters are not perfect but they do a reasonable job. I think only one of my lens+adapter combos actually hits infinity exactly and I have 2 dozen lens+adapter combos. It's not a perfect world but we get by.  _________________ Gary
Currently active gear....
Sony a7
E-M1 Mkll
Rubinar 1000/10 + 2x matched extender
Tamron 500/8 55BB
Sigma 100-300/4
Vivitar Series 1.... 200/3, 70-210/3.5 (V1 by Kiron), 135/2.3, 105/2.5 macro, 90/2.5 macro (Bokina), 90-180/4.5 Flat Field Macro, 28-90mm f/2.8-3.5
Carl Zeiss.... 180/2.8, 135/3.5, 85/1.4, 35/2.4 Flektagon, 21/2.8 Distagon
Nikon.... 55/3.5 micro, 50/1.2
Elicar 90/2.5 V-HQ Macro
Zhongyi Speedmaster 85/1.2
Jupiter-9 85/2
Helios.... 58/2 44-3
Hartblei 45/3.5 Super-Rotator TS-PC
Zenitar 16/2.8 fisheye
Samyang 8/3.5 fisheye
Nodal Ninja 4, Neewer leveling tripod base
Flickr http://www.flickr.com/photos/gazsus/ Website http://garianphotography.co.uk/ |
|
| Back to top |
|
 |
jessh
Joined: 16 Jul 2012 Posts: 3
|
 Posted: Wed Jul 18, 2012 7:00 am Post subject: |
|
 Posted: Wed Jul 18, 2012 7:00 am Post subject: |
|
|
jessh wrote:
But I want perfection It seems that the adapter manufacturers initially erred on the side of making the adapters too thick. As a result they would not focus to infinity. When they decided to fix the problem instead of figuring out what the thickness actually should be they simply chopped off a couple tenths of a mm and called it a day. Unfortunately that gives us the opposite problem.
The adapter I currently have is from big_is and is about 1.3mm thick. It should be 1.46mm thick. I have been messaging him about the problem and he has been very nice but seems reluctant to fix it since he has been selling them for years and this is the first time anyone has complained. Interestingly the m42 adapter I have from him is basically the correct thickness. If you want an adapter of the correct thickness so that focus marks will be correct and you don't lose close focus abilities than please message him so that he knows there is a market for it.
Of course not all still lenses are going to be perfectly accurate on this anyway but they will be a whole lot closer when the lens mount is the right distance from the film plane. Currently I am contemplating disassembling all of my lenses and adjusting the focus racks so that the marks are correct......
SonicScot,
What adapter do you have that is correct?
~Jess |
|
| Back to top |
|
 |
SonicScot
 Joined: 01 Dec 2011 Posts: 2697 Location: Scottish Highlands
|
 Posted: Wed Jul 18, 2012 7:54 am Post subject: |
|
 Posted: Wed Jul 18, 2012 7:54 am Post subject: |
|
|
SonicScot wrote:
I mostly use big_is for my adapters and only one has failed do far. The one adapter which hits infinity is from big_is too, an M42 to EOS adapter without AF confirmation. It's the last adapter I bought from them so maybe they are getting closer with each new model.
This is the one Click here to see on Ebay
I'm not going to claim it will work as well for everyone and every lens, it just so happens that it works perfectly on my new Tair-3.
Plus. for only $3.50 you can't complain.  _________________ Gary
Currently active gear....
Sony a7
E-M1 Mkll
Rubinar 1000/10 + 2x matched extender
Tamron 500/8 55BB
Sigma 100-300/4
Vivitar Series 1.... 200/3, 70-210/3.5 (V1 by Kiron), 135/2.3, 105/2.5 macro, 90/2.5 macro (Bokina), 90-180/4.5 Flat Field Macro, 28-90mm f/2.8-3.5
Carl Zeiss.... 180/2.8, 135/3.5, 85/1.4, 35/2.4 Flektagon, 21/2.8 Distagon
Nikon.... 55/3.5 micro, 50/1.2
Elicar 90/2.5 V-HQ Macro
Zhongyi Speedmaster 85/1.2
Jupiter-9 85/2
Helios.... 58/2 44-3
Hartblei 45/3.5 Super-Rotator TS-PC
Zenitar 16/2.8 fisheye
Samyang 8/3.5 fisheye
Nodal Ninja 4, Neewer leveling tripod base
Flickr http://www.flickr.com/photos/gazsus/ Website http://garianphotography.co.uk/ |
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|