EXA 1a, Topcor 1.8/55, Fomapan 100 in Fomadon LQR

[iangreenhalgh1]

Well, the camera works perfectly, the lens is excellent, but the result was a very underdeveloped roll due to one little failure - my thermometer broke so I had to guess the water temp when developing. I obviously got it wrong. I was able to recover a few frames with PP, but the rest of the roll was no good.

Lesson is that it's the little details that will get ya.

I did 7mins at 1:14 dilution, which should have been at a temp of 21C, I guess it was more like 18C, I'm just posting this thread to share my experience and help others to avoid the same pitfalls.

#1
at 1:14
#2

#3

#4