MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Male thread to Nikon F adapter
View previous topic :: View next topic  


Reply

Hi, I'm considering buying a MTO 1000/10, its quite cheap and that's probably partly due to the mount : instead of an M39/42 it has a 58mm male thread rear.
From a quick search I didn't find a female thread to F mount adapter. Are these being made, maybe to attach cameras and eyepieces ?


Reply

Hello,

You could try a Nikon K2 ring (to be found in a K-ring set) and a 52 to 58 mm step-up ring. The K2 has a F-mount bayonet and female 52 mm thread.


Reply

Gurdie wrote:
Hello,

You could try a Nikon K2 ring (to be found in a K-ring set) and a 52 to 58 mm step-up ring. The K2 has a F-mount bayonet and female 52 mm thread.


the idea sounds good, nevertheless i wouldn´t trust this 52/58 filterthreats to hold the cam during a walk in the field, would take it only on balcony with a lot of pillows on the planned impact area of the cam


Reply

56 DIN wrote:
the idea sounds good, nevertheless i wouldn´t trust this 52/58 filterthreats to hold the cam during a walk in the field, would take it only on balcony with a lot of pillows on the planned impact area of the cam


Yes, I agree. I have only used the K-ring to reverse a light lens, like a 50 mm, not to support a 1000 mm mirror lens. The thread is quite shallow. And the step-up rings are normally used for filters only.