MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

M42 - OM (AF) - MMF2 = ??
View previous topic :: View next topic  


Reply

Hi,

I am facing the following situation with the first M42 lens is used with a sensor 4/3 (EP-L1):

A. Apparently M42-OM lens adapter with AF confirm that I have, can not "suppress" pin on the lens so it does not make the lens aperture is open (even if it is turned in the ring) but not the "result"

2. I tried with the M42-EOS adapter and the pin was depressed aperture lens that can enable normal functioning in each aperture diaphragm

3. Due to the consideration that one day would re-use DSLR E series, and in order to continue to use the Zuiko lenses both digital and analog, so I always use the adapter MMF2.

Q1: Is it a case # 1 influence on the use of MMF2 than if directly using M42-MFT adapter?

Q2: What is the solution without changing the original lens mount? (I'm currently awaiting delivery of M42-OM lens adapter which the seller has been in tests with M42 lenses and pin depressed

Q3: Are all the M42 lenses like these?

Thanks


Reply

sorry if this question already been post before, just need some info regarding this situation


Reply

All M42 lens have pin must be 'suppressed' (depressed) for aperture ring to close aperture.

Some M42 lenses have 'A/M' or 'Auto/Man' switch to depress pin when lens is used with adapter that does not depress pin.

To use M42 lens (without the switch) with adapter that does not depress pin, find a way to depress pin with something that can be removed when lens is used on other camera.


Reply

visualopsins wrote:
All M42 lens have pin must be 'suppressed' (depressed) for aperture ring to close aperture.

Some M42 lenses have 'A/M' or 'Auto/Man' switch to depress pin when lens is used with adapter that does not depress pin.

To use M42 lens (without the switch) with adapter that does not depress pin, find a way to depress pin with something that can be removed when lens is used on other camera.



What m42 lens does have the switch for example? Well, I'll try to depressed the pin or might having another presses adapter then. Thanks


Reply

declan wrote:

What m42 lens does have the switch for example?


I don't have my lens or camera in front of me so I am borrowing a photo Kuuan posted in the marketplace. I hope he doesn't mind. I don't have many takumar lens but the one I have do have the auto/manual switch. You can see the word "Auto" below the aperture 8. You should push it the other side to "manual" to use it on your camera.



Reply

declan wrote:

Q2: What is the solution without changing the original lens mount? (I'm currently awaiting delivery of M42-OM lens adapter which the seller has been in tests with M42 lenses and pin depressed

Q3: Are all the M42 lenses like these?

Thanks


Q2: i solved it by adapting one of my m42>4/3 adapters so it presses the aperture pin, by inserting a metal ring plate between two parts of the adapter , maybe you could do the same (please post photo of your m42 adapter so we can see if you could adapt it)

Q3: there are 3 types of m42 lenses:
1. preset lenses - they don't have aperture pins
2. automatic diaphragm lenses with A/M switch - they have aperture pin but can be used normally when switch is set to M position (some of them i have are: jupiter 21m 200mm, CZJ Pancolar 50mm , Super-Macro Takumar 50mm... i would say that the most of m42 lenses have A/M switch)
3. automatic diaphragm lenses without A/M switch - they are always wide open if you don't find the way to keep the aperture pin pressed, either by adapting the adapter or by jamming the pin pressed in (i have few of these: pentacon auto 50mm, fujinon 50mm macro , sirius 18-28mm)


Reply

my_photography wrote:
declan wrote:

What m42 lens does have the switch for example?


I don't have my lens or camera in front of me so I am borrowing a photo Kuuan posted in the marketplace. I hope he doesn't mind. I don't have many takumar lens but the one I have do have the auto/manual switch. You can see the word "Auto" below the aperture 8. You should push it the other side to "manual" to use it on your camera.




Now I know what its look like the switch, thanks for sharing


Reply

Wolf,


I think this sigma 24/2.8 is the #3 auto model, so I did put some cuttonbud pipe to hold it. There I still might using my adapter.

What a tons of quality collection you've had there


Reply

declan wrote:
Wolf,

What a tons of quality collection you've had there


thank you Smile