| View previous topic :: View next topic |
| Author |
Message |
Schnauzer
 Joined: 09 Apr 2008 Posts: 2155 Location: Maine, USA
Expire: 2012-03-08
|
 Posted: Wed Jan 18, 2012 8:35 pm Post subject: Canon FS 4000 scanner trial II |
|
 Posted: Wed Jan 18, 2012 8:35 pm Post subject: Canon FS 4000 scanner trial II |
|
|
Schnauzer wrote:
I bought an Elan IIE with battery grip in the early fall (2011). I had some film from it I took in late October I hadn't scanned yet. So a good excuse to try the FS4000 again. If I can find a SCSI cable for it I am going to try it on an older computer i have for the EOS 1v software, with XP Pro SP3 on it. I think my son in law has one. I have to look it up again, but I think its 51 pins. I have a cable but it won't fit the scanner.
Just snaps, trying the camera. Fuji Superia X-Tra 400. No idea what I had on for a lense that day.
Dudleys lets play position.
[url=http://ronmorsephoto.smugmug.com/Pets/Canon-Elan-IIE/21087009_tgPfr5#!i=1677082821&k=Z83gpZb&lb=1&s=A] [/url]
Maxwell, wondering why we were out in a snow storm.
[url=http://ronmorsephoto.smugmug.com/Pets/Canon-Elan-IIE/21087009_tgPfr5#!i=1677083907&k=H2b2xG3&lb=1&s=A] [/url]
Smelling where a coyote pack passed through. Our early morning walk. Kind of hard on the bare fingers caring a camera.
[url=http://ronmorsephoto.smugmug.com/Pets/Canon-Elan-IIE/21087009_tgPfr5#!i=1677084813&k=4LLDH33&lb=1&s=A] [/url]
Marking a coyote waste pile as his territory, then kicking stuff all over it.
[url=http://ronmorsephoto.smugmug.com/Pets/Canon-Elan-IIE/21087009_tgPfr5#!i=1677084831&k=wD6BwqK&lb=1&s=A] [/url] _________________ Ron
Last edited by Schnauzer on Thu Jan 19, 2012 12:42 am; edited 1 time in total |
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Wed Jan 18, 2012 10:19 pm Post subject: |
|
 Posted: Wed Jan 18, 2012 10:19 pm Post subject: |
|
|
Attila wrote:
These are very good results ! Great subjects certainly help to believe result is stunning! |
|
| Back to top |
|
 |
GrahamNR17
 Joined: 17 Jan 2009 Posts: 1855 Location: Norfolk, UK
Expire: 2012-09-06
|
 Posted: Wed Jan 18, 2012 10:22 pm Post subject: |
|
 Posted: Wed Jan 18, 2012 10:22 pm Post subject: |
|
|
GrahamNR17 wrote:
It's conclusive, isn't it? That scanner's superb
...and adorable dogs too  |
|
| Back to top |
|
 |
Schnauzer
 Joined: 09 Apr 2008 Posts: 2155 Location: Maine, USA
Expire: 2012-03-08
|
 Posted: Thu Jan 19, 2012 1:11 am Post subject: |
|
 Posted: Thu Jan 19, 2012 1:11 am Post subject: |
|
|
Schnauzer wrote:
| Attila wrote: |
| These are very good results ! Great subjects certainly help to believe result is stunning! |
Thanks Attila. So far I'm real happy although I haven't done a lot of negs yet. Now if I just had all those beautiful places to take pictures of that you do. Glad you like my boys. _________________ Ron |
|
| Back to top |
|
 |
Schnauzer
 Joined: 09 Apr 2008 Posts: 2155 Location: Maine, USA
Expire: 2012-03-08
|
 Posted: Thu Jan 19, 2012 1:15 am Post subject: |
|
 Posted: Thu Jan 19, 2012 1:15 am Post subject: |
|
|
Schnauzer wrote:
| GrahamNR17 wrote: |
It's conclusive, isn't it? That scanner's superb
...and adorable dogs too  |
Thanks Graham. So far so good. I'll tell my boys you like them. They are my constant companions
What did you work out with your scanning? I remember the scanning thread you started. _________________ Ron |
|
| Back to top |
|
 |
GrahamNR17
 Joined: 17 Jan 2009 Posts: 1855 Location: Norfolk, UK
Expire: 2012-09-06
|
 Posted: Thu Jan 19, 2012 5:29 am Post subject: |
|
 Posted: Thu Jan 19, 2012 5:29 am Post subject: |
|
|
GrahamNR17 wrote:
| Schnauzer wrote: |
| GrahamNR17 wrote: |
It's conclusive, isn't it? That scanner's superb
...and adorable dogs too  |
Thanks Graham. So far so good. I'll tell my boys you like them. They are my constant companions
What did you work out with your scanning? I remember the scanning thread you started. |
I concluded there aren't any affordable good scanners still being made, and the good older ones still fetch too much money (as a generalisation). So I turned to copying with digital, and I am getting results similar (but not as good) as yours and Laurence's.
My hurdle at the moment is in the post-processing with he heavy blue cast. Once I can overcome that, I shall publish some results I should probably man-up and ask for help on another thread  |
|
| Back to top |
|
 |
Kram
 Joined: 06 Feb 2010 Posts: 1344 Location: Portland, OR
|
 Posted: Thu Jan 19, 2012 6:39 am Post subject: |
|
 Posted: Thu Jan 19, 2012 6:39 am Post subject: |
|
|
Kram wrote:
Schauzer, looks great! Is your Canon FS 4000 scanner USB? |
|
| Back to top |
|
 |
yinyangbt
 Joined: 08 Oct 2010 Posts: 1973 Location: Romania
Expire: 2012-12-27
|
 Posted: Thu Jan 19, 2012 12:33 pm Post subject: |
|
 Posted: Thu Jan 19, 2012 12:33 pm Post subject: |
|
|
yinyangbt wrote:
| GrahamNR17 wrote: |
It's conclusive, isn't it? That scanner's superb
|
I've told you, if you remember
| Quote: |
| I concluded there aren't any affordable good scanners still being made, and the good older ones still fetch too much money (as a generalisation). |
how much is "affordable" ? _________________ Cheers , Teo
http://photo.net/photodb/member-photos?user_id=5778915 |
|
| Back to top |
|
 |
yinyangbt
 Joined: 08 Oct 2010 Posts: 1973 Location: Romania
Expire: 2012-12-27
|
 Posted: Thu Jan 19, 2012 12:44 pm Post subject: Re: Canon FS 4000 scanner trial II |
|
 Posted: Thu Jan 19, 2012 12:44 pm Post subject: Re: Canon FS 4000 scanner trial II |
|
|
yinyangbt wrote:
| Schnauzer wrote: |
I bought an Elan IIE with battery grip in the early fall (2011). I had some film from it I took in late October I hadn't scanned yet. So a good excuse to try the FS4000 again. If I can find a SCSI cable for it I am going to try it on an older computer i have for the EOS 1v software, with XP Pro SP3 on it. I think my son in law has one. I have to look it up again, but I think its 51 pins. I have a cable but it won't fit the scanner.
Just snaps, trying the camera. Fuji Superia X-Tra 400. No idea what I had on for a lense that day.
|
It's a great camera,in my opinion.I love mine and I feel guilty I don't use it enough.
Great results with this scanner.When I bought my scanner ,they were a little over my "affordable" target and quite rare ,so went to Minolta. Congrats, you have two good pieces of gear. _________________ Cheers , Teo
http://photo.net/photodb/member-photos?user_id=5778915 |
|
| Back to top |
|
 |
Schnauzer
 Joined: 09 Apr 2008 Posts: 2155 Location: Maine, USA
Expire: 2012-03-08
|
 Posted: Thu Jan 19, 2012 3:08 pm Post subject: |
|
 Posted: Thu Jan 19, 2012 3:08 pm Post subject: |
|
|
Schnauzer wrote:
| GrahamNR17 wrote: |
| Schnauzer wrote: |
| GrahamNR17 wrote: |
It's conclusive, isn't it? That scanner's superb
...and adorable dogs too  |
Thanks Graham. So far so good. I'll tell my boys you like them. They are my constant companions
What did you work out with your scanning? I remember the scanning thread you started. |
I concluded there aren't any affordable good scanners still being made, and the good older ones still fetch too much money (as a generalisation). So I turned to copying with digital, and I am getting results similar (but not as good) as yours and Laurence's.
My hurdle at the moment is in the post-processing with he heavy blue cast. Once I can overcome that, I shall publish some results I should probably man-up and ask for help on another thread  |
Find the black point and the white point in PS and that should take care of the blue cast. _________________ Ron |
|
| Back to top |
|
 |
Schnauzer
 Joined: 09 Apr 2008 Posts: 2155 Location: Maine, USA
Expire: 2012-03-08
|
 Posted: Thu Jan 19, 2012 3:34 pm Post subject: |
|
 Posted: Thu Jan 19, 2012 3:34 pm Post subject: |
|
|
Schnauzer wrote:
| Kram wrote: |
| Schauzer, looks great! Is your Canon FS 4000 scanner USB? |
Thank you. I am using the USB cable. Its USB 1.? and not as fast as the USB 2. I tried a couple of scans at 4000dpi and it is slow. I am not complaining, for the quality of scans I'm getting now I can live with a little wait. Actually at 2000dpi it isn't all that slow. _________________ Ron |
|
| Back to top |
|
 |
Schnauzer
 Joined: 09 Apr 2008 Posts: 2155 Location: Maine, USA
Expire: 2012-03-08
|
 Posted: Thu Jan 19, 2012 3:50 pm Post subject: Re: Canon FS 4000 scanner trial II |
|
 Posted: Thu Jan 19, 2012 3:50 pm Post subject: Re: Canon FS 4000 scanner trial II |
|
|
Schnauzer wrote:
| yinyangbt wrote: |
| Schnauzer wrote: |
I bought an Elan IIE with battery grip in the early fall (2011). I had some film from it I took in late October I hadn't scanned yet. So a good excuse to try the FS4000 again. If I can find a SCSI cable for it I am going to try it on an older computer i have for the EOS 1v software, with XP Pro SP3 on it. I think my son in law has one. I have to look it up again, but I think its 51 pins. I have a cable but it won't fit the scanner.
Just snaps, trying the camera. Fuji Superia X-Tra 400. No idea what I had on for a lense that day.
|
It's a great camera,in my opinion.I love mine and I feel guilty I don't use it enough.
Great results with this scanner.When I bought my scanner ,they were a little over my "affordable" target and quite rare ,so went to Minolta. Congrats, you have two good pieces of gear. |
I like the camera very much. I already had one without the battery grip for a long time. I wanted a battery grip for it and bid on a camera with grip and nice strap for $34.00 and got it. The camera turned out to be in excellent shape so I semi-retired my old one.
I had bid on a few FS4000s, but they all went for more than I bid. I told my wife I wasn't going to pay that kind of money for an old scanner. She saw one going cheap and bid on it for me. She got it and it turned out to be like new. Doesn't look like the slide holder had been used.
http://www.ebay.com/itm/320824796759?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2648
Their is another one on the bay right now but it doesn't have a film holder with it.
http://www.ebay.com/itm/400206696790?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2648 _________________ Ron |
|
| Back to top |
|
 |
GrahamNR17
 Joined: 17 Jan 2009 Posts: 1855 Location: Norfolk, UK
Expire: 2012-09-06
|
 Posted: Thu Jan 19, 2012 4:42 pm Post subject: |
|
 Posted: Thu Jan 19, 2012 4:42 pm Post subject: |
|
|
GrahamNR17 wrote:
| yinyangbt wrote: |
| GrahamNR17 wrote: |
It's conclusive, isn't it? That scanner's superb
|
I've told you, if you remember |
Yes yes yes Anyway, now you sound like my ex wife
| yinyangbt wrote: |
| how much is "affordable" ? |
Good question. I would suggest under 500 Euro would be affordable for an enthusiast, or at least a price they'd be prepared to pay. |
|
| Back to top |
|
 |
yinyangbt
 Joined: 08 Oct 2010 Posts: 1973 Location: Romania
Expire: 2012-12-27
|
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|