| View previous topic :: View next topic |
| Author |
Message |
msteen1314
 Joined: 10 Jan 2012 Posts: 72 Location: New Brunswick, Canada
|
 Posted: Tue Jan 10, 2012 4:31 am Post subject: Dkl retina adapter to Contax RTS body |
|
 Posted: Tue Jan 10, 2012 4:31 am Post subject: Dkl retina adapter to Contax RTS body |
|
|
msteen1314 wrote:
After much searching to no avail, can anyone out there confirm if an adapter exists to mount DKL Retina lenses to a contax RTS (original RTS) (C/y mount adapter)
My go to camera is a Retina Reflex III and as such I have 7 lenses. I recently purchased a Contax RTS to go with the motor drive and 250 exposure back.
Seems that there are many other adapters out there for DKL lenses to be adapted to other systems however this one seems to harder to find. Ebay has been checked extensively however I'm either not search with the correct criteria or such a beast may not exist.
Any assistance would be appreciated.
Thanks in advance
Martin |
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Tue Jan 10, 2012 10:08 am Post subject: |
|
 Posted: Tue Jan 10, 2012 10:08 am Post subject: |
|
|
Attila wrote:
I never seen ever, most adapter make by third party makers to popular digital camera systems. |
|
| Back to top |
|
 |
heritagecameras
 Joined: 19 Feb 2011 Posts: 104 Location: UK
|
 Posted: Wed Jan 11, 2012 4:52 pm Post subject: Re: Dkl retina adapter to Contax RTS body |
|
 Posted: Wed Jan 11, 2012 4:52 pm Post subject: Re: Dkl retina adapter to Contax RTS body |
|
|
heritagecameras wrote:
| msteen1314 wrote: |
| After much searching to no avail, can anyone out there confirm if an adapter exists to mount DKL Retina lenses to a contax RTS (original RTS) (C/y mount adapter) |
I'm not aware of any such adapter, but you can probably use a combination of two to achieve the desired result. Adapters are available from Retina Reflex to M42 screw, and from M42 screw to Contax/Yashica. As each type individually allows infinity focusing the combination should too, but as there are two lots of tolerances for the manufacturers to get wrong... _________________ Dave, HCL |
|
| Back to top |
|
 |
msteen1314
 Joined: 10 Jan 2012 Posts: 72 Location: New Brunswick, Canada
|
 Posted: Wed Jan 11, 2012 9:24 pm Post subject: |
|
 Posted: Wed Jan 11, 2012 9:24 pm Post subject: |
|
|
msteen1314 wrote:
Thanks Dave, it's an interesting approach to the problem and as the adapters are relatively inexpensive it may be worth a look.
The stacking of adapters may be an issue for the reason you stated.
Thanks again
Martin |
|
| Back to top |
|
 |
William
 Joined: 26 Nov 2009 Posts: 489 Location: London
|
 Posted: Wed Jan 11, 2012 11:25 pm Post subject: |
|
 Posted: Wed Jan 11, 2012 11:25 pm Post subject: |
|
|
William wrote:
If you are stacking adapters then making them both bayonets if possible might be easier than having a screw mount in there as they are a more snug fit. |
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Wed Jan 11, 2012 11:54 pm Post subject: |
|
 Posted: Wed Jan 11, 2012 11:54 pm Post subject: |
|
|
Attila wrote:
Today I saw Retina M42 adapter on Ebay , M42 contax adapter is exists ,so you can do what you like. |
|
| Back to top |
|
 |
heritagecameras
 Joined: 19 Feb 2011 Posts: 104 Location: UK
|
 Posted: Thu Jan 12, 2012 9:22 am Post subject: |
|
 Posted: Thu Jan 12, 2012 9:22 am Post subject: |
|
|
heritagecameras wrote:
| William wrote: |
| If you are stacking adapters then making them both bayonets if possible might be easier than having a screw mount in there as they are a more snug fit. |
Yes, I agree that two bayonet fittings are better where possible, but I'm not aware of any bayonet adapters for Contax/Yashica that allow infinity focusing. As far as I know, M42 screw is the only fitting common to both Retina Reflex (DKL) and Contax/Yashica adapters. Screw adapters can sometimes work loose (especially with older lenses and their often stiff focusing actions), but as Martin has such an impressive collection of lenses it may be worth permanently fixing the two adapters together if this is a problem? _________________ Dave, HCL |
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|