MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

How can we set the aperature reading on a M42 - EOS adapter?
View previous topic :: View next topic  


Reply

I have a few generic no-name M42 to EOS adapters that come pre set with aperture settings. Some are always set to 1.4, some always set to 2.0. Since I rarely change adapters, what I'd like to do is program each one to the widest aperture of the lens it's connected to, so that the metering is accurate when I'm working wide open.

I know there's a way to do it, but exactly how escapes me. Can anyone here point me in the right direction? Thanks Smile


Reply

Well, not all the chipped EOS adapters are programmable ... If yours are equipped with EMF or Optix chips, you can set the f/stop value,
the focal length and the micro-AF adjustment. Otherwise, you're out of luck and you will have to cope with the fixed focal length and
aperture ...

For EMF programming, look here.
For Optix programming, look here.

Eventually, there is another chip, the Dandelion. I don't know if it is an alias for the Optix one or not. Anyway, its programming info
are here.

Hope this helps ...