MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Harajuku Tokyo Kodak Tri-x
View previous topic :: View next topic  


Reply

Took these in Tokyo. Tri-x, Nikon FE, Ais 24/2.8, lab developed, scanned Epson 700 using Epson scan software

First time shooting Tri-x. I found it scanned much better than Neopan presto 400 I've been using. Basically no editing in photoshop. Some shots need a little exposure compensation and some contrast. I'll do it when I have more time.


#1 Odawara Station on the way to Tokyo.


#2 Omotesando in Aoyama Tokyo. I wish I had taken my digital camera as the autumn colours were beautiful


#3 The Prada shop in Omotesando. This is one of a few unusually designed shops in this area



#4


#5


#6 An empty shinkansen train.


#7 Some sushi


Thanks for looking Very Happy


Reply

Few more from this roll


#1


#2


#3


#4


Reply

reallygreat composition. and the film scanned well indeed, very sharp. i enjoyed them all.


Reply

superb series, nice b&w!


Reply

rbelyell wrote:
reallygreat composition. and the film scanned well indeed, very sharp. i enjoyed them all.


+1


Reply

Thanks everyone. Tri-x was so much easier than neopan presto to scan. I bought a couple of rolls of Ilford xp 2 super when I was in Tokyo. I'm looking forward to trying it out. Has anyone got any advice for using this c41 black and white film? How easy does it scan?


Reply

My favorite is the sushi shot. I like the perspective and neatly controlled DoF. your first shot would have been my favorite except for the escalator on the right side -- it makes the composition seem off balance. My suggestion, go back and ask them to demolish the escalator. After you take the new shot, then they can reinstall it, if they like. I'm sure they'll jump right on that.


Reply

Yebisu wrote:
Thanks everyone. Tri-x was so much easier than neopan presto to scan. I bought a couple of rolls of Ilford xp 2 super when I was in Tokyo. I'm looking forward to trying it out. Has anyone got any advice for using this c41 black and white film? How easy does it scan?


Use the Kodak version regularly therefore these comments may not be true for the Ilford version (which I do not like as much). I slightly over-expose the film compared to its rating by setting the meter at ISO 320. I'm usually using a hand-held meter and normally give the image a little more light than I might a regular BW film. Given the wide exposure latitude of these films it isn't a matter of getting the "right" exposure (what does that mean anyway?) but the trade off between low ISO/fine grain/low contrast and high ISO/coarser grain/higher contrast.

I always get basic lo-res scans done by the lab. If you are getting them done by a cheapo high street lab they will probably have a nasty colour cast which you can get rid of in the software. I use an expensive lab because I got fed up with my negs coming back scratched and dirty. When I need higher-res images I scan them myself. I find it best to scan as a colour image and then convert to monochrome in software.

Best wishes, Kris.


Reply

Thanks Kris. Really useful information.

For the Tri-x, I used the only lab in my area that develops black and white in house. It cost 600 yen (4.5 pounds) for just the negatives. It seems like a serious lab as all they do is sell and develop film and do prints. I'm happy with the results (but then I don't know what to expect from a pro lab). Next time I shoot Tri-x I'll try a pro lab in Tokyo and see if there is a difference.