| View previous topic :: View next topic |
| Author |
Message |
Kram
 Joined: 06 Feb 2010 Posts: 1344 Location: Portland, OR
|
 Posted: Thu Sep 01, 2011 7:25 pm Post subject: hkyongnuophotoequipment Ebay Rad Seller RF-602 Flash Trigger |
|
 Posted: Thu Sep 01, 2011 7:25 pm Post subject: hkyongnuophotoequipment Ebay Rad Seller RF-602 Flash Trigger |
|
|
Kram wrote:
I bought a RF-602 Flash Trigger for Canon from hkyongnuophotoequipment on ebay. Reports were that it was a good flash trigger and the seller had decent feedback.
When I got the trigger and inserted the battery they provided, it immediately started getting hot. It got so hot in under 60 seconds, I was sure it was going to catch on fire or explode. I burned my finger while removing it.
Foolishl act #1: I thought by contacting the seller through ebay's site that it was the same as opening a case. Wrong.
Foolish act #2: I spent $27 USD returning it as the seller insisted I send it with tracking and that was the cheapest way to return it to China. They agreed to refund, "don't worry" etc.
The seller strung things out past the window for opening a case and is now not responding to messages.
So I spent $39 on the bad product and $27 to send it back.
Here's a link to them:
http://myworld.ebay.com/hkyongnuophotoequipment/?_trksid=p4340.l2559
Lesson learned. Never buy from China. Open a case immediately.

Last edited by Kram on Tue Sep 06, 2011 1:52 am; edited 1 time in total |
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Thu Sep 01, 2011 7:29 pm Post subject: |
|
 Posted: Thu Sep 01, 2011 7:29 pm Post subject: |
|
|
Attila wrote:
Sorry to hear your dissapointment! |
|
| Back to top |
|
 |
peterqd
 Joined: 28 Feb 2007 Posts: 7449 Location: near High Wycombe, UK
Expire: 2014-01-04
|
 Posted: Thu Sep 01, 2011 10:39 pm Post subject: |
|
 Posted: Thu Sep 01, 2011 10:39 pm Post subject: |
|
|
peterqd wrote:
| Attila wrote: |
| Sorry to hear your dissapointment! |
Yes, so am I, but there are good and bad sellers everywhere. I could say "never buy from USA", and not just once, after encountering idiot sellers there. These things are usually misunderstandings. _________________ Peter - Moderator |
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Thu Sep 01, 2011 10:50 pm Post subject: |
|
 Posted: Thu Sep 01, 2011 10:50 pm Post subject: |
|
|
Attila wrote:
| peterqd wrote: |
| Attila wrote: |
| Sorry to hear your dissapointment! |
Yes, so am I, but there are good and bad sellers everywhere. I could say "never buy from USA", and not just once, after encountering idiot sellers there. These things are usually misunderstandings. |
+1 I bought from many countries and I have same opinion than Peter have , but honestly after hundreds of purchase I count less than 10 trouble. I think this is more than perfect result. |
|
| Back to top |
|
 |
Kram
 Joined: 06 Feb 2010 Posts: 1344 Location: Portland, OR
|
 Posted: Thu Sep 01, 2011 11:53 pm Post subject: |
|
 Posted: Thu Sep 01, 2011 11:53 pm Post subject: |
|
|
Kram wrote:
Thanks for your kind words guys.
That may be true but the cheapest option for return with tracking (required by seller) was huge. Much easier to return locally.
Plus, the product itself was manufactured there and was defective. The name China stands for quality, yes?
Who wants to trade me their German lenses for some Chinese lenses?
Just being a bit snarky but due to the huge cost of return, I will probably never buy from such a far away place unless I know the seller. |
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Thu Sep 01, 2011 11:59 pm Post subject: |
|
 Posted: Thu Sep 01, 2011 11:59 pm Post subject: |
|
|
Attila wrote:
| Kram wrote: |
Thanks for your kind words guys.
That may be true but the cheapest option for return with tracking (required by seller) was huge. Much easier to return locally.
Plus, the product itself was manufactured there and was defective. The name China stands for quality, yes?
Who wants to trade me their German lenses for some Chinese lenses?
Just being a bit snarky but due to the huge cost of return, I will probably never buy from such a far away place unless I know the seller. |
You are in lucky state in USA , you have huge market and almost anything available locally. In your position you made right descision, Chinese products usually crappy quality right, sadly almost everything made in China today. |
|
| Back to top |
|
 |
Himself
 Joined: 01 Mar 2007 Posts: 3315 Location: Montreal
Expire: 2013-05-30
|
 Posted: Fri Sep 02, 2011 1:02 am Post subject: |
|
 Posted: Fri Sep 02, 2011 1:02 am Post subject: |
|
|
Himself wrote:
Kram, I recommend Cactus V4 that I bought almost a year ago.
I've used it all the winter without any problem. I bought the transmitter and 2 receivers. Now I want to buy another receiver.
I see that they have the next generation - Cactus V5.
http://www.gadgetinfinity.com/product.php?productid=17204 _________________ Moderator Himself |
|
| Back to top |
|
 |
indianadinos
 Joined: 06 Jul 2008 Posts: 1310 Location: Toulouse, France
Expire: 2011-12-05
|
 Posted: Fri Sep 02, 2011 5:10 pm Post subject: |
|
 Posted: Fri Sep 02, 2011 5:10 pm Post subject: |
|
|
indianadinos wrote:
| Himself wrote: |
Kram, I recommend Cactus V4 that I bought almost a year ago.
I've used it all the winter without any problem. |
Hi,
At first, i apologize for hijacking this thread ...
Could you please tell me if the Cactus V4 works with high voltage flashguns ? I'm looking for an RF trigger for my Metz 45-CT1, which has a trigger voltage of about 120V. I'm almost sure that the soon-to-come Cactus V5 can handle this, but i'm not sure about the V4 ... _________________ Please visit my blogs Shooting with a Pentax K10D / FF Visions
Takumar: 24/3.5, 28/3.5, 35/2, 35/3.5, 50/1.4, 55/1.8, 85/1.8, 105/2.8, 120/2.8, 135/3.5, 150/4, 200/4
Pentax-K: M28/2.8, K28/3.5, M50/1.4, A50/1.7, M50/4 Macro, K85/1.8, K105/2.8, K135/2.5, M200/4, M70-150/4
Zeiss: Flektogon 20/2.8, 20/4, 35/2.4, 35/2.8, Tessar 50/2.8, Pancolar 50/1.8, Biotar 58/2, Sonnar 135/3.5, Sonnar 180/2.8
Meyer: Primagon 35/4.5, Domiplan 50/2.8, Oreston 50/1.8, Primoplan 58/1.9, Trioplan 100/2.8, Orestor 100/2.8, Orestor 135/2.8
Schacht/Steinheil: Travenar 90/2.8, Travenon 135/4.5, Quinar 135/2.8, Quinar 135/3.5
Russian: MIR 37B, Industar 50/3.5, Helios 44M & 44M-2, Jupiter 37A
P6: Flektogon 50/4, Biometar 80/2.8, Orestor 300/4
Nikkor: Nikkor-O 35/2, Micro 55/3.5, Nikkor-S 50/1.4, Nikkor-Q 135/2.8
Fuji: EBC 28/3.5, EBC 55/3.5 Macro, EBC 135/2.5
Misc Lenses: Kiron 105/2.8 Macro, Tamron SP90/2.5
... and a few other Vivitar, Tamron, Sigma and Soligor lenses ...
|
|
| Back to top |
|
 |
Kram
 Joined: 06 Feb 2010 Posts: 1344 Location: Portland, OR
|
 Posted: Fri Sep 02, 2011 5:38 pm Post subject: |
|
 Posted: Fri Sep 02, 2011 5:38 pm Post subject: |
|
|
Kram wrote:
Himself, thanks for the recommendation. Will definitely check it out. Planning to use it with my White Lightning studio strobes and Canon 60D.
Not sure if it was because of this post or not, but the seller refunded the complete amount plus my return shipping cost! Color me surprised! So perhaps not so bad a seller (but product was faulty). |
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Fri Sep 02, 2011 6:05 pm Post subject: |
|
 Posted: Fri Sep 02, 2011 6:05 pm Post subject: |
|
|
Attila wrote:
| Kram wrote: |
Himself, thanks for the recommendation. Will definitely check it out. Planning to use it with my White Lightning studio strobes and Canon 60D.
Not sure if it was because of this post or not, but the seller refunded the complete amount plus my return shipping cost! Color me surprised! So perhaps not so bad a seller (but product was faulty). |
Sound is great , crappy chinese product , but great seller. |
|
| Back to top |
|
 |
Himself
 Joined: 01 Mar 2007 Posts: 3315 Location: Montreal
Expire: 2013-05-30
|
 Posted: Mon Sep 05, 2011 3:52 pm Post subject: |
|
 Posted: Mon Sep 05, 2011 3:52 pm Post subject: |
|
|
Himself wrote:
| indianadinos wrote: |
| Himself wrote: |
Kram, I recommend Cactus V4 that I bought almost a year ago.
I've used it all the winter without any problem. |
Hi,
At first, i apologize for hijacking this thread ...
Could you please tell me if the Cactus V4 works with high voltage flashguns ? I'm looking for an RF trigger for my Metz 45-CT1, which has a trigger voltage of about 120V. I'm almost sure that the soon-to-come Cactus V5 can handle this, but i'm not sure about the V4 ... |
I use it to fire a Canon 450 EX and a Vivitar 285 HV.
Not a problem till now with Vivitar.
I'll check the specs on the papers that it came with. _________________ Moderator Himself |
|
| Back to top |
|
 |
NewStuff
 Joined: 31 Mar 2011 Posts: 847 Location: Wales, UK
|
 Posted: Sat Sep 24, 2011 5:52 pm Post subject: |
|
 Posted: Sat Sep 24, 2011 5:52 pm Post subject: |
|
|
NewStuff wrote:
Just a note on the RF-602. I use one without any issues whatsoever, and it get's quite a beating underground in a Slate mine. No issues with heating, and it's still ticking over on the original betteries over 400 shots later (I use it as a remote release). _________________ Too many to list. |
|
| Back to top |
|
 |
Kram
 Joined: 06 Feb 2010 Posts: 1344 Location: Portland, OR
|
 Posted: Sat Sep 24, 2011 6:06 pm Post subject: |
|
 Posted: Sat Sep 24, 2011 6:06 pm Post subject: |
|
|
Kram wrote:
I bought a Strobies 4 Channel Radio Trigger to replace the RF-602. Used it on a job yesterday with my White Lightning strobes and it worked like a charm!
I still plan on getting some sort of hotshoe to PC cord unit as a back up.
Bought a Nikon AS-15 which would not work with my Canon 60D. Hot shoes are different from Canon to Nikon?! Odd. |
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|