MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Nikon FE2 Issue
View previous topic :: View next topic  


Reply

So I got a Nikon FE2 tonight. It was as-is, and free, so the price was fair. However, it only works in B and M250 mode. All other shutter speeds, the mirror locks up but the shutter won't fire. I need help diagnosing this. Here are some additional things:

1- This happens even when the film counter advances past "1"
2- I put in two new sets of batteries and cleaned the contacts with a Q-tip and rubbing alcohol.
3- The meter is not 100% responsive. It jitters up and down to different light levels, but always hovers above the "B" and "M" marks on the bottom of the meter.
4- Everything else on the camera seems to be fine. It's clean; the shutter blades are fine.

I did an Internet search and every site seems to say "just replace the batteries" or "clean the battery contact" and all will be fine. This problem is often linked to an MD-11 or MD-12 winder, but no winder came with the camera (which is not to say a winder was never used.)

Anyone have any ideas?


Reply

Coroded wire going to the battery contact?


Reply

As an extra precaution you might need to check the condition of the md contacts as well, if not done already.
Nevertheless, I rather suspect a pc problem.


Reply

Since the meter is active but the shutter won't fire then it's not just a battery
contact issue.

So, not likely to be something easily fixed.

I would keep it for parts and find another working body.


Reply

Put a roll of film in it.