| View previous topic :: View next topic |
| Author |
Message |
ForenSeil
 Joined: 15 Apr 2011 Posts: 2731 Location: Kappeln, Schleswig-Holstein, Germany.
|
 Posted: Fri Aug 19, 2011 2:14 pm Post subject: Ultrafin Liquid and Formapan 200 - How many agitations? |
|
 Posted: Fri Aug 19, 2011 2:14 pm Post subject: Ultrafin Liquid and Formapan 200 - How many agitations? |
|
|
ForenSeil wrote:
I've found the devolopment time of 7.5min @ 20°C on the net.
But nowhere is mentioned how many agitations have to be used at this time.
Is anybody experienced with that combination? _________________ I'm not a collector, I'm a tester
My camera: Sony A7+Zeiss Sonnar 55/1.8
Current favourite lenses (I have many more):
A few macro-Tominons, Samyang 12/2.8, Noritsu 50.7/9.5, Rodagon 105/5.6 on bellows, Samyang 135/2, Celestron C8 2000mm F10
Most wanted: Samyang 24/1.4, Laowa 100/2.8 2x, Nikon 200/2 ED |
|
| Back to top |
|
 |
Seele
 Joined: 17 Apr 2009 Posts: 746 Location: Sydney Australia
|
 Posted: Fri Aug 19, 2011 4:28 pm Post subject: |
|
 Posted: Fri Aug 19, 2011 4:28 pm Post subject: |
|
|
Seele wrote:
I have not tried this combination but I used Ultrafin extensively some years ago, but I can give you some general observations.
Ultrafin is a developer which needs some care to use, especially agitation. A well-known British photographer used it later in her life and could not master it as it can give mottled greys. The only practical way to use it is to use a processing tank twice the size of what the film takes up. For instance, with a tank that takes 120 or two 35mm reels, put in only one 35mm reel, and put in just enough solution to cover the reel. Keep the inside air space at least as much as the solution inside, and also make sure the reel is clamped to the bottom of the tank.
When you invert the tank for agitation, the film would be completely drained from the solution, and the solution gets thoroughly mixed, so when you put it right way up again, a uniform solution is applied to the film surface. Failing to do that, you will get mottling in the areas with uniform tones.
My way of agitation is every half minute and it worked quite well. Do be aware that Ultrafin is indeed a fine-grain developer, producing somewhat mushy grain patterns, quite the opposite of Rodinal. I also found the resultant negatives to be a little on the thin side, so you can use the published time as a starting point, and then do your own fine-tuning to suit your own system. Good luck. |
|
| Back to top |
|
 |
hexi
 Joined: 01 Jul 2009 Posts: 1631 Location: France
Expire: 2011-11-18
|
 Posted: Fri Aug 19, 2011 7:51 pm Post subject: |
|
 Posted: Fri Aug 19, 2011 7:51 pm Post subject: |
|
|
hexi wrote:
Hi
there 3 general "offical" methods as a starting point :
agfa ( the one i use ) : continous agitation for the 1 minute, then one every 30sec then comes
ilford method : 4 times during the first 10 sec then every minute
fuji : 5 agitation during every 30 secs
That said, it's up to you, remember to use the same method for fixing, and once you ' ve found the method that gives the best results and suits you stick to it !
by now i prefer stirring, much better and regular results, just because it's more relaxing and the film is always in the liquid. i said this because with shaking the tank i had unpleasant undeveloped parts of film
good luck , it's worth it : ) _________________ Happy owner and user of :
SLR's > Contax Aria - RX
DSLR > Canon 5D
Lenses : C/Y Planar 1.4/50 - Distagon 2.8/35 - Planar 1.4/85
http://www.flickr.com/photos/sonnar85 |
|
| Back to top |
|
 |
Seele
 Joined: 17 Apr 2009 Posts: 746 Location: Sydney Australia
|
 Posted: Fri Aug 19, 2011 8:33 pm Post subject: |
|
 Posted: Fri Aug 19, 2011 8:33 pm Post subject: |
|
|
Seele wrote:
hexi,
If you have left enough air space inside the tank, then the number of inversion at every agitation cycle is not really important, as the solution is thoroughly mixed to disperse bromine and developing agent evenly. In fact, if you give vigorous agitation which takes up a greater percentage of overall processing time, you might run into bromine drags.
Decades ago Jobo published a paper on the inherent pitfalls with spinning the spiral only, and that was before the common adoption of inversion agitation. The tank Jobo produced also incorporate an up-and-down movement as well, and some other tanks also did that, like one I used to use which makes the spiral hops up and down when spinning it. Inversion agitation changed everything, of course: when I was instructing students and if they used Paterson tanks, the first thing I did was to confiscate their stirring sticks! |
|
| Back to top |
|
 |
ForenSeil
 Joined: 15 Apr 2011 Posts: 2731 Location: Kappeln, Schleswig-Holstein, Germany.
|
 Posted: Sat Aug 20, 2011 2:15 am Post subject: |
|
 Posted: Sat Aug 20, 2011 2:15 am Post subject: |
|
|
ForenSeil wrote:
Thank you  _________________ I'm not a collector, I'm a tester
My camera: Sony A7+Zeiss Sonnar 55/1.8
Current favourite lenses (I have many more):
A few macro-Tominons, Samyang 12/2.8, Noritsu 50.7/9.5, Rodagon 105/5.6 on bellows, Samyang 135/2, Celestron C8 2000mm F10
Most wanted: Samyang 24/1.4, Laowa 100/2.8 2x, Nikon 200/2 ED |
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|