MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Wanted: M40x0.75 (Copal #1) to M42 adapter
View previous topic :: View next topic  


Reply

I am looking for a female M40x0.75 (Copal #1 thread) to male M42x1 adapter but I'm not sure such an adapter actually exists. Does anyone know where I might be able to source one without having it custom made (which is my last resort due to cost and delay)?

M40x0.75 (Copal #1) to M39x1 would be OK too.

It's to fit a Tominon lens with an m40x0.75 male thread which normally fits into a Copal #1 shutter. I'd like to use the lens in a normal m42 bellows.

Thanks in advance.
JJ


Reply

Well if the bellows was T2 mount, seems like a M40 to M42 ring could be used -- the M42 thread on step ring is x0.75mm thread pitch, same as T2, but that requires T2 bellows.

edit:

Another possibility? Look for a M42 lens reversal ring for 40mm lens filter size, use 40mm gender changer for mounting lens on reversal ring.


Reply

visualopsins wrote:
Well if the bellows was T2 mount, seems like a M40 to M42 ring could be used -- the M42 thread on step ring is x0.75mm thread pitch, same as T2, but that requires T2 bellows.

edit:

Another possibility? Look for a M42 lens reversal ring for 40mm lens filter size, use 40mm gender changer for mounting lens on reversal ring.


Thanks. The problem is finding anything with an m40x0.75 thread in the first place. There are lots of m40.5 step up/down but very little in m40.

JJ


Reply

Seems to be the one you're looking for (JinFinance) : Click here to see on Ebay


Reply

Jieffe wrote:
Seems to be the one you're looking for (JinFinance) : Click here to see on Ebay


Thanks. I've ordered one.

JJ