Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!

SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Canon 50 1.2 LTM
View previous topic :: View next topic  


PostPosted: Sun Sep 02, 2012 11:51 am    Post subject: Canon 50 1.2 LTM Reply with quote

Canon 50 1.2 LTM on an Leica M9

Wide open it is very soft. Still soft at f1.4.

By f2 it becomes acceptable for general usage. Personally, i dont find softnesss to be a problem, i just use it for different purposes. For portraits it lends a very dreamy look - borderline ghosts and spirits Laughing and since the oof rendering is not jarring to my eyes, its a good choice for mugshots

Talk is cheap. Here are the shots -> (mild post processing)









































































Last edited by Hari on Sun Sep 02, 2012 2:53 pm; edited 1 time in total


PostPosted: Sun Sep 02, 2012 1:19 pm    Post subject: Reply with quote

thx for sharing Hari, I always wondered how this lens performs Wink

It's different, I like it Very Happy


PostPosted: Sun Sep 02, 2012 1:32 pm    Post subject: Reply with quote

They have an F0.95 lens getting sharp at F8 LOL, Canon not get my respect all with this lenses.

Nice to see your samples, but not my cup of tea at all.


PostPosted: Sun Sep 02, 2012 2:55 pm    Post subject: Reply with quote

Nordentro wrote:
thx for sharing Hari, I always wondered how this lens performs Wink

It's different, I like it Very Happy


Considering its a sub 500€ superfast lens for rangefinders, a little pp helps bring sharpness in while keeping the eccentric bokeh intact, i like it! Very Happy


PostPosted: Sun Sep 02, 2012 3:35 pm    Post subject: Reply with quote

Attila wrote:
They have an F0.95 lens getting sharp at F8 LOL, Canon not get my respect all with this lenses.

Nice to see your samples, but not my cup of tea at all.


It's terrible at f1.2 and f1.4 ... stopping it down to f2 makes it bearable and like 99% of the lenses, at 5.6 it's usable Laughing

I wouldn't use this lens for taking pictures everyday but once in awhile it can be a single lens solution - day time when its nice and sunny, stopping it down to f5.6 and using it at night at f1.4 with lots and lots of sharpening in lightroom

most interestingly, of all the superfast 50's i used so far, this has the least amount of viewfinder blockage Laughing


PostPosted: Mon Sep 03, 2012 1:53 pm    Post subject: Reply with quote

I had two copies of this lens, and tried a third one; none of them was soft; or, to say better, all were way less soft than any Noctilux (except current); two copies needed to fix focus issues, wich is a tipical rangefinder problem, and I did it by myself, beeing a mere calibration problem. From 2,8, even too contrasty.
I suspect that your copy could be not the best, or that M9 sensor doesn't like it.


PostPosted: Tue Sep 04, 2012 2:49 am    Post subject: Reply with quote

I was also interested in that lens and so I also know some much sharper looking sample shots wide open. It don't believe that it's sharper than the Noctilux F1 though. Maybe needs to be shimmed or it's a cucumber.

Last edited by ForenSeil on Tue Sep 04, 2012 3:14 pm; edited 1 time in total


PostPosted: Tue Sep 04, 2012 8:42 am    Post subject: Reply with quote

Quote:
Maybe needs to be shimmed


The Canon 50 1,2 has maybe the best calibration way I ever seen: somewhere around the front bague, there is a small screw; if you untight it, you can screw or unscrew all the glass until you reach the right position (best at infinity); if the lens doesn't have other problems, in 5 minutes you have done.


PostPosted: Sun Oct 07, 2012 7:11 pm    Post subject: Reply with quote

Ultrapix wrote:
Quote:
Maybe needs to be shimmed


The Canon 50 1,2 has maybe the best calibration way I ever seen: somewhere around the front bague, there is a small screw; if you untight it, you can screw or unscrew all the glass until you reach the right position (best at infinity); if the lens doesn't have other problems, in 5 minutes you have done.


awesome tip, thank you!


PostPosted: Thu Oct 18, 2012 8:12 pm    Post subject: Reply with quote

Hari wrote:
Ultrapix wrote:
Quote:
Maybe needs to be shimmed


The Canon 50 1,2 has maybe the best calibration way I ever seen: somewhere around the front bague, there is a small screw; if you untight it, you can screw or unscrew all the glass until you reach the right position (best at infinity); if the lens doesn't have other problems, in 5 minutes you have done.


awesome tip, thank you!


It's been a pleasure Smile