MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Nagel Stuttgart Triumph 6x9 folder
View previous topic :: View next topic  


Reply

Hi folks

I couldn't resist paying 8ukp for this 6x9 folder, it's a bit beaten up but it all works and the lens seems okay.

Not found much info on this camera, anyone know much about it?

Nagel became Kodak AG, my camera is from the early 30s I think.


Reply

Nice find. The Nagel-branded cameras are fairly scarce, Nagel didn't make all that many cameras pre-Kodak.

The Triumph seems to have been a style that Kodak did not continue in production; or at any rate the 6x9 Kodak folders I have that were made by Nagel are substantially different in styling.

What lens and shutter has it got ?


Reply

Congrats! Let we see how it's perform. Usually I like a bit later cameras, I am curious.


Reply

Not sure, have to check later, here are the seller's pics.




Reply

It had hard life Shocked I look forward cleaned , restored version. Hopefully it will works.


Reply

Quite the beauty, however hard her life has been. I look forward to seeing more!


Reply

She is definitely a restoration case but seller says shutter and aperture and wind on all work as they should. I think it's been used a lot then put away in a loft for decades hence it is so dirty.

I will have fun restoring her, if the shutter is no good I can always replace the lens/shutter.


Reply

Gauthier Vario-type shutter (this does not need cocking, but you will probably want a cable release; even the fast speed is marginal for handholding), lens is front cell focus it seems, probably a triplet, rebadged by Nagel I think.

Its got an interesting and uncommon fold-down back hinged on the underside. Typically the backs hinged on the side.

Kodak seems to have retained just the higher-end of the Nagel product line.


Reply

I will get a cable release, can't imagine using this camera without a tripod.

I noticed the unusual hinged back, I decided to pick this camera because it isn't one of the very common ones and nice to have something unusual.


Reply

The Nagel arrived today.

It looks a lot worse than it is!

Everything works fine, the shutter fires at all speeds and they look fairly accurate to me.

The bellows look light-tight but I need to check this later properly.

Lens is fairly clean, doesn't look to have much fungus, just dust, focussing is a bit stiff but I will fix that with some lubrication.

I don't know whether the leatherette has shrunk or whether it has been replaced badly but it is not great, that makes her look tatty.

I'll get her cleaned and serviced than take some pics, looking forward to putting a film through this camera, will be a real test of my photog skills!


Reply

congrats man! cant wait to see pix of machine and with machine!


Reply

Cheers man, the inside of the camera looks very clean and the bellows from the inside look fine, outside they look a bit perished but should be light-tight.

It's a solid aluminium thing, doesn't feel as solid a my ZI Nettar but it feels tough in it's own right. There is a load of pitting in the aluminium exterior, looks original rather than wear and tear, making me wonder if this camera is made from two cast halves, the pitting looks like what you get on the surface of cast metal.

There are a few cool little features on this camera, I'll post pics shortly.


Reply

Often times I find that 'user' looking outsides mean the camera has actually been used by someone in the past 20-30 years, rather than it sitting somewhere deteriorating... I have a couple that have the leather tatty or off, or hanging by tape, yet the shutter/lens/bellows are in good shooting shape... and, especially old Kodaks, where the camera itself looks damn good on the outside, but the bellows are hopelessly shot.


Reply

One thing I like about this camera is that it's obviously been used a hell of a lot, the wear and tear is just from normal use, whoever owned it originally obviously took a lot of pictures with it and it hasn't been abused at all, just well-used, not abused.

Only feature I've noticed that I don't like is the metal flap over the red window, it's loose and flaps around, the design is cheap and looks it, the sliding window cover on my Nettar is 100x better engineering.


Reply

Ditto on Kodak folder bellows, the pre-war ones are almost always goners.


Reply

Now the camera is in front of me I can assess it.

The exterior is well worn and dirty, some corrosion where the paint is missing but this can all be repaired.

The leatherette is clearly not original and whoever replaced it did a very poor job, that will have to be removed and replaced.

The top and particularly bottom aluminium plates show this unusual pitting.

That's the bad. The good is that it all seems to work fine, the shutter fires at all speeds and seems fairly accurate. The lens is stiff to focus but looks clear and bright, the aperture moves, a bit stiff but does work.

It's a fully working camera it seems but needs a lot of cosmetic work to make it look as it should, that replaced leatherettte is horrid...












Reply

Just wipe the dust off and run some film through that wonderful camera


Reply

+1 that's what I'd do too...


Reply

Well, my BW 120 rollfilm arrived in the post today so I can exactly than soon.

Spent a few hours cleaning it the other night, so much dirt came off.

I then removed that nasty leatherette and it was held on by some nasty brown gum arabis type stuff.

Now here is the problem - he red window at the back is knackered, the original red plastic is gone and someone had replaced it with a thin piece from another camera, it was only held in place by the leatherette so when I removed it the red plastic came away. I need to fix that and the flap to cover that window is a nasty repair job, need to fix that as well.

This camera does work but it is in much greater need of restoration that I realised and now needs work to put it back into working order, sadly.

On a more positive note, my Ensign Selfix 220 6x6 folder is in awesome condition so I can definitely put some film through that right away...


Reply

for the red window - an office supply store (or your office Wink) can provide presentation folders or hanging file tabs made of red transparent plastic. These work. You might want to look at the inside of the back cover to affix the replacement window... and while at it, if there's clearance, put a thin felt ring around it as well. Ah but looking at the photo, I don't think there's a pressure plate. Some of my real old ones (the Goerz and a couple of Kodaks) don't have any either. A previous owner had a strip of what looks like black gaffer's tape running on the bottom side of the window - I added some gaffer's tape around the hole as a grommet. But I'm considering running the tape fully across the back as a compensation to today's thinner film/backing.

The swinging cover looks like is hanging on a grommet like thing that may have gone loose with age. While you figure that one out, I'll tell you I use black electrician's tape - or gaffer's tape - with one end bent over as a make-do flap with great success.


Reply

The swinging cover isn't original, someone made it out of a piece of aluminium, it's very crude. It is held in place with an equally crude nut and bolt. I'm just going to remove it, throw it away and make a new one which I will affix properly, it's been done very shoddily.

I still have the red plastic that I remove, I will replace it with a new piece and affix it to the inside.

No pressure plate as you say.

I can restore this camera and I will do eventually, just at the moment I have the fully working Nettar and Selfix 6x6 folders to use so I will use tham and will take my time restoring this Nagel.