MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Advice on the Sony A-350 for MFLenses usage
View previous topic :: View next topic  


Reply

After using (and loving) the NEX for a couple of month, I was thinking in trying the A-series of DSLR cameras from Sony. A local colleague is selling a A-350 quite cheap.

My preferred focusing mode is through zoomed Liveview. On the NEX I can select between x7 zoom or x14 zoom in liveview mode. My sight is not good nowadays, on the traditional DSLRs without liveview focusing is a pain for me.

I've been reading through the A-350 manual, and noticed the zoomed liveview in the A-350 is only x1.4 or x2.

Anyone having the A-350 could please give me some advice on if this smaller magnification size is enough to properly focusing?.

Thanks in advance.
Jes.


Reply

Jesito cant comment on the A350 but i use manual lenses on my A700 with the AF chip confirm and it is 99% spot on.
Point camera look through viewfinder focus and when the dot appears on the focusing screen its good to shoot.
I get very good results.
Maybe worth also asking the same question on dynaxdigital forum


Reply

eddieitman wrote:
Jesito cant comment on the A350 but i use manual lenses on my A700 with the AF chip confirm and it is 99% spot on.
Point camera look through viewfinder focus and when the dot appears on the focusing screen its good to shoot.
I get very good results.
Maybe worth also asking the same question on dynaxdigital forum


Thanks for your answer!.
I got an M42 adapter that should also work on my Dynax 7000 but seems not to work. It seems dead. Which one are you using?.

Regards.
Jes.


Reply

I have two the Big_IS one (black version) and the weakpotoman
the weakpotoman one does not engage very well and the chip did not register at first but i added three strips of insulation tape around the mount so that it sits tight and it works perfect maybe that is the issue with your one?


Reply

eddieitman wrote:
I have two the Big_IS one (black version) and the weakpotoman
the weakpotoman one does not engage very well and the chip did not register at first but i added three strips of insulation tape around the mount so that it sits tight and it works perfect maybe that is the issue with your one?


Ill try it again with this in mind Wink
Thanks for the clue!.

Regards.
Jes.