Test to see just how bad my D2H is to UV-IR contamination.
D2H + Marumi UV-IR Cut filter on my Sigma 28mm f1.8 AF lens + a black camera bag as the subject.
The positive side:
1) It really works! Black comes out truly black at low ISO. At higher ISO it is still closer to the true colour.
2) Images seems to be sharper at 3:1 zoom at ISO below 800. It is really not that obvious at 1:1.
3) Works under strong sunlight or tungsten lighting.
The negative side
1) Can be an expensive filter to get, especially HQ ver. Mine is middle of the road at $54.
2) There seem to be more green noise. I was expecting an overall small reduction in noise level. I am puzzled by this. It could be that there is more yellow / warm coloured noise without the filter, so with the filter on, it is showing more green coloured noise at higher ISO?
Good demonstration.
I think in reality most Digital Cameras would benifit from such a filter.
I saw a similar result when I tested my 5D using a Leica Branded 55mm filter on my Planar 50mm.
Tungsten light is especially IR "noisy".
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum