MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Tokina AT-X 24-40mm - worth trying to clean?
View previous topic :: View next topic  


Reply

Hi, I recently bought a used Tokina AT-X 24-40mm f/2.8 lens (Pentax mount, KA lens), which turned out to have some very fine debris coating the internal elements (primarily in the front from what I can tell). Most visible when I shine a flashlight into the lens at an angle. Here's a close-up looking into the lens from the front (posted here using the code tag since both img and url were getting their targets stripped out for some reason):

Code:
http://forum.mflenses.com/userpix/20116/4370_20110508_at_112442_1.jpg


The seller had claimed, "lens is very clean no scratches or mold It does have a pice of dust inside the lens in the center dose not show in photos" (perhaps the blatant spelling errors should have been a giveaway for me to have passed on the lens). While it's possible that in some shooting circumstances debris like that won't make a difference in photos, I'd think it could be a real attraction for fungus down the road, no?

The seller offered to take it back if I was willing to take a pay shipping (both initial and return) and accept a partial refund, which I was unwilling to do. I took it to a local camera repair place who charged me $15 to estimate a cleaning, and came back with a $120 estimate, which I passed on. I asked Eric at pentaxs.com for an estimate, and he said probably $40 to clean it (not including shipping presumably).

Is this something I could do myself? It's an all-metal lens, so it's built well, however when I slid off the zoom grip it appears the three small screws holding the two halves of the zoom ring together are covered with locktite. Under the focus grip its a combination of several strips of thin black tape and what looks like locktite in the grooves between the two halves. I'm not exactly sure though, I've never taken a lens apart. Anyone have any experience disassembling/cleaning this lens, or any of the older Tokina AT-X lenses?

Or should I just send it to someone like Eric?