Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!

SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Shutter activation count on the Olympus E-Px family
View previous topic :: View next topic  


PostPosted: Wed Mar 23, 2011 7:59 am    Post subject: Shutter activation count on the Olympus E-Px family Reply with quote

Found elsewhere in the net, it works.

My Oly E-P1 shows an activation count of 1136 now.

Checking shutter count on E-p1, E-P2, E-PL1 & E-PL2

By following these steps you can check your shutter count as well as a few other things. Follow these steps:


1. While holding the "Menu" button, press Power button to switch on

2. Press "Menu" and go to "Monitor brightness adjustment" screen

3. Press "Info" and "OK" button at same time, you will see the screen showing "Olympus"

4. Press the following buttons in the sequence: Up, Down, Left, Right and then press the Shutter, followed by Up (dial button in my E-P1)

5. Engineering mode page is seen. Press dial button to Page 1, 2, 3, and "D".

6. Shutter count is on "Page 2" under "R".

The other lines on the screen mean:

R: shutter release count
S: flash use count
C: CMOS cleaning mode (with mirror lock-up - in E-410 series)
U: number of ultrasonic dedusting, ~ number of power switch on
V: number of use of LiveView
B: number of shot using In-Body Stablization


Hope this will be useful for someone else. Wink

Regards.
Jes.


PostPosted: Tue Mar 29, 2011 3:49 am    Post subject: Reply with quote

Thank you, Jesito!

But I probably will never sell the "little box"!

It will help those who will!