MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Pentacon electric 135mm f/2.8 cleaning
View previous topic :: View next topic  


Reply

Hi guys,
I have a problem with closing the Pentacon electric 135mm, after opening it for cleaning. The thing is that i managed to set everything up right, exept for the focusing ring, which when focusing, comes of with the back of the lens.
If anyone had and solved this problem, please help? Rolling Eyes


Reply

Here's a link to the non-electric version : http://forum.mflenses.com/pentacon-auto-2-8-135-partial-disassembly-and-cleaning-t9836.html

I don't know if it's of any help.


Reply

Thanks, they seem to be identical except for the electric part. But still, given that the little screw holds the ring from focusing beyond infinity, what part holds it in the opposite direction? - it still falls apart when focusing!?


Reply

If you post some pictures, maybe I could be of some help...


Reply



This is a perfect fit, focus on infinity (where the ring is stopped by the little screw, so it cannot rotate further) - every ring is in its right position according to the explanation of sichko. Apperture is working fine... but then I start rotating >



This is after one whole rotation, where it should stop before the infinity sign, but it doesn't. The ring continues rotating and rest is in the next image Smile



Reply

Looks like the rods underneath the mount are missing. Please remove the mount (three or four black screws on the back) and take some more pictures.


Reply



This is focus on infinity.



This is when the focus ring comes off.



This shows on what focus distance it comes off.



That's the back of the lens.

Many thanks for trying to help Smile


Reply

In pictures no.1 and no.2 you can see the "L" or "teeth"-shaped rods (fastened with 2 screws) I talked about. In picture no.1 they are still in guidance reaching into the helicoid, in picture no.2 they are out of guidance. I think there are two possible defects here:

1) most likely you missaligned the two parts when reassembling the helicoid. Therefor the "teeth" does not reach far enough into the helicoid to prevent it from unscrewing while focussing. You can validate this by checking if you reach infinity focus at the infinity mark. Try-and-error issue: rearrange the helicoid alignment until you reach infinity focus exactly at infinity mark.

2) much less likely the infinity stop is broken in some way. Dont-know-howto-fix issue.

Hope that helps...