MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Petri CCS 2.8 and Kentmere 400 samples
View previous topic :: View next topic  


Reply

Lens is fixed CCS 45/2.8; film souped in D-76 1:1, scans from Epson 4490; no meter used, just brain/eyes:









This lens is no contrast monster, but it has a lovely old-fashioned glow about. I think it might be best suited for black and white portraits. Thanks, Bill for the use of it. This is only the second roll I've been able to run through it, first black and white. There is a slight light leak from either the latch or hinge side that showed up faintly in a very few negs. Cam definitely needs seals - and is worth the effort. I fixed the wind-on issue; just some lint preventing a lever from sitting properly.


Last edited by fish4570 on Wed Dec 08, 2010 4:22 pm; edited 1 time in total


Reply

These RF's + BW films are really suiting you, I really like this series; there's a real visual peace and atmosphere you have going on.


Reply

Thanks, Jussi.
Must be the anti-depressants. Laughing


Reply

Diptych, same kit:





Reply

Paul, good to see you're getting some use out of the Petri. Sorry to hear
about a light leak, these two are from the only roll I shot through it, Efke
400(rebadged Ilford HP5+) using my Thornton's 2-Bath homebrew:






I think the lens has a 'pleasing personality' and am liking what I see with
the Kentmere 400, congrats!


Reply

Thanks, Bill.
That lens does have personality.
That the cam has a bit of leak is no surprise, considering its age. I will cobble up some sealage to take care of that. I'm also thinking of sending it to those camerleather folks to get them to recover it, maybe in the spring.