| View previous topic :: View next topic |
| Author |
Message |
Nikos
 Joined: 17 May 2010 Posts: 1077 Location: Greece
Expire: 2015-01-02
|
 Posted: Tue Nov 09, 2010 12:19 pm Post subject: High-end monitor suggestions |
|
 Posted: Tue Nov 09, 2010 12:19 pm Post subject: High-end monitor suggestions |
|
|
Nikos wrote:
I am considering of replacing my EIZO SX2461W.
It is an excellent monitor, but its PVA panel makes shadows to open up by about 1 stop when viewed under a 45º angle.
What would you suggest? At least 24".
EIZO has come up with a 24" (CG245W) which has a built-in (hardware) calibrator,
but I think it would be nice to move towards 30" (CG303W), to make the upgrade more "apparent".
I have also seen some very good NEC monitors, and considerably cheaper than EIZO. _________________ Νίκος • www.diafragma.gr
Cameras: Canon EOS 5D Mark II, Sony α7R, Sony NEX-5N
MF lenses:
SLR:
Canon TS-E 17mm f/4, Zeiss 2.8/21 ZE, Zeiss 2/28 Contax, Zeiss 2/35 ZE, Zeiss 1.4/50 Contax, Zeiss 1.4/85 Contax, Zeiss Makro 2/100 ZE,
Zeiss 2/135 Contax, Zeiss 2.8/135 Contax, Zeiss Vario-Sonnar 35-70 Contax, Zeiss Vario-Sonnar 100-300 Contax, Zeiss F-Distagon Rollei, Canon FD 24mm f2, Minolta MD Rokkor 35mm f2.8
Rangefinder:
Zeiss 4.5/21 C Biogon ZM, Zeiss 2/35 Biogon ZM, Voigtländer 15mm f/4.5 Heliar L39, Leica Tele-Elmarit 2.8/90mm, Zeiss 2/45 Contax G, Zeiss 2.8/90 Contax G, Canon 50mm 1.8 LTM
AF lenses: Canon 15mm f/2.8 Fisheye, Canon 24-70 f/2.8 L, Canon 70-200 f/2.8 L IS II, Canon 70-200 f/4 L, Canon 300 f/4 L IS, Canon 100 f/2.8 macro
|
|
| Back to top |
|
 |
berraneck
 Joined: 24 May 2009 Posts: 972 Location: prague, czech republic
|
 Posted: Tue Nov 09, 2010 1:34 pm Post subject: |
|
 Posted: Tue Nov 09, 2010 1:34 pm Post subject: |
|
|
berraneck wrote:
I would put into consideration list also the HP Dreamcolor 2480zx
search reviews at prad.de _________________ equipment doesn´t count, good photographs do |
|
| Back to top |
|
 |
trifox
 Joined: 14 May 2008 Posts: 3614 Location: UK
Expire: 2014-05-29
|
 Posted: Tue Nov 09, 2010 11:06 pm Post subject: |
|
 Posted: Tue Nov 09, 2010 11:06 pm Post subject: |
|
|
trifox wrote:
Get BARCO and calibrate it well - if you're lucky - you may get a cool monitor for small momey - especially when some office/pre-press studio writes off some stuff..
tf _________________ Flickr.com |
|
| Back to top |
|
 |
Lloydy
 Joined: 02 Sep 2009 Posts: 7880 Location: Ironbridge. UK.
Expire: 2022-01-01
|
 Posted: Tue Nov 09, 2010 11:28 pm Post subject: |
|
 Posted: Tue Nov 09, 2010 11:28 pm Post subject: |
|
|
Lloydy wrote:
The last 3 monitors I've had have all been Samsung, who apparently make the actual lcd's for Sony.
If they do or not, I still like them. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Back to top |
|
 |
Esox lucius
 Joined: 26 Aug 2008 Posts: 2441 Location: Helsinki, Finland
Expire: 2011-11-18
|
 Posted: Wed Nov 10, 2010 5:10 am Post subject: |
|
 Posted: Wed Nov 10, 2010 5:10 am Post subject: |
|
|
Esox lucius wrote:
I did not know about the updated 245, I would have picked the 243 if I were to buy a monitor today. Which means now, I will buy the 245
http://www.eizo.com/global/products/coloredge/cg243w/index.html |
|
| Back to top |
|
 |
visualopsins
 Joined: 05 Mar 2009 Posts: 11698 Location: California
Expire: 2027-07-11
|
 Posted: Wed Nov 10, 2010 6:27 am Post subject: |
|
 Posted: Wed Nov 10, 2010 6:27 am Post subject: |
|
|
visualopsins wrote:
Barco
Since we can dream, also http://www.doubleblackimaging.com/products/c-3mp.htm _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Back to top |
|
 |
AhamB
 Joined: 22 Jun 2008 Posts: 733 Location: Germany
|
 Posted: Fri Nov 12, 2010 5:59 pm Post subject: |
|
 Posted: Fri Nov 12, 2010 5:59 pm Post subject: |
|
|
AhamB wrote:
http://tftcentral.co.uk/ has very good monitor reviews. I would go for a NEC with a matched calibration device.
After having used an Apple ACD 30" for a long time, I am now on a Dell U2410. It's a nice screen, but I really needed to get used to the lower pixel pitch. It is a disadvantage for me, because everything looks a bit less sharp with the bigger pixels. If you don't have perfect vision, then the higher pixel pitch of a 27/30" screen might be a bit of a strain on your eyes.
I don't have any complaints about the Dell; it's a nice wide gamut screen with a good H-IPS panel from LG (practically the same panel as the HP LP2475W, which is usually more expensive). Only the black level could be a bit better perhaps, but it doesn't disturb me.
If you can afford one of the better NEC models, you'll get a more uniformly lit screen with less colour variation across the screen. For the price of a NEC or Eizo 24" you might be able to get two Dell U4210's though.  |
|
| Back to top |
|
 |
trifox
 Joined: 14 May 2008 Posts: 3614 Location: UK
Expire: 2014-05-29
|
 Posted: Fri Nov 12, 2010 6:03 pm Post subject: |
|
 Posted: Fri Nov 12, 2010 6:03 pm Post subject: |
|
|
trifox wrote:
ok -- if Barco is really expensive and not easy-to-get ..
I think one of the best pre-press monitors (excellent for Photoshoping)
is IIYAMA but the classic - CRT monitor ... I know it's huge but the outcome is excellent..
I have found one!!!! right now!!!!
Click here to see on Ebay
I would buy it!!! and it's in the UK...
and this is consumer review - and believe me, it;s TRUE:
Advantages: pin sharp picture, flat screen, 3 year warranty
Disadvantages: tedious OSD navigation, the lines that come with an apeture grille will annoy a few
I had got myself burned badly with my first 17" monitor (I won't begin to tell you what happened - maybe another time). I decided I'd do it right this time.
I had always considered Iiyama to be high end monitors, a little out of my league, but as I was gathering information, I found that the Vison Master Pro 410 was more and more the monitor for me. I took the plunge and was not disappointed.
As soon as I got it out of the box, I knew this was a good piece of kit. It felt sturdy, it had dual inputs (D-SUB and BNC), and the screen was so flat, it actually looked concave comapred to other monitors I had seen before.
I hooked it up to my computer and went into Windows. Wow. The picture was sharp, pin sharp and rock solid. The colours were clear and bright. The regulation was excellent (notice the way the picture gets slightly bigger (nearer the edges of the tube) if there is a sudden change of brightness (like having a black background then opening a full screen, white window)? Monitors with poor regulation will show this up to a greater degree. The VM Pro 410 had virtually none of this.
The monitor comes with a three year swap out warranty.
It's not perfect. The OSD (On Screen Display) is controlled by only three buttons (menu, minus and plus) which make navigating a little tedious (example: to swap between the BNC and D-SUB inputs takes minimum 5 button presses). The visible area of the screen is only adequate, and the quite wide bezel surrounding the screen does a good job of making this monitor seem small for a 17".
This monitor has an aperture grille tube instead of a shadow mask. This uses a grille made up of lots of vertical thin wires to deflect the electron beam to make up the picture. Without getting too technical, to hold the wires together it is necessary to have 2 horizontal wires at 1 and 2 thirds down the screen. These are vaguely visible at all times, but you soon
forget that they are there. I never see them these days.
All in all, if I was to recommend a monitor manufacturer, I wouldn't hesitate to put Iiyama's name into the reckoning.
tf _________________ Flickr.com |
|
| Back to top |
|
 |
berraneck
 Joined: 24 May 2009 Posts: 972 Location: prague, czech republic
|
 Posted: Fri Nov 12, 2010 7:48 pm Post subject: |
|
 Posted: Fri Nov 12, 2010 7:48 pm Post subject: |
|
|
berraneck wrote:
If I was into buying CRT monitor, I´d pick Eizo T965 - i don´t about anything better, naturally except medical monitors and so. But it´s REALLY huge beast. _________________ equipment doesn´t count, good photographs do |
|
| Back to top |
|
 |
Himself
 Joined: 01 Mar 2007 Posts: 3315 Location: Montreal
Expire: 2013-05-30
|
 Posted: Fri Nov 12, 2010 8:36 pm Post subject: Re: High-end monitor suggestions |
|
 Posted: Fri Nov 12, 2010 8:36 pm Post subject: Re: High-end monitor suggestions |
|
|
Himself wrote:
| nkanellopoulos wrote: |
EIZO has come up with a 24" (CG245W) which has a built-in (hardware) calibrator,
|
Panel is made by LG. _________________ Moderator Himself |
|
| Back to top |
|
 |
Nikos
 Joined: 17 May 2010 Posts: 1077 Location: Greece
Expire: 2015-01-02
|
 Posted: Fri Nov 12, 2010 9:02 pm Post subject: Re: High-end monitor suggestions |
|
 Posted: Fri Nov 12, 2010 9:02 pm Post subject: Re: High-end monitor suggestions |
|
|
Nikos wrote:
| Himself wrote: |
| nkanellopoulos wrote: |
EIZO has come up with a 24" (CG245W) which has a built-in (hardware) calibrator,
|
Panel is made by LG. |
Your thought is vague.
You mean I should rather get an LG monitor? _________________ Νίκος • www.diafragma.gr
Cameras: Canon EOS 5D Mark II, Sony α7R, Sony NEX-5N
MF lenses:
SLR:
Canon TS-E 17mm f/4, Zeiss 2.8/21 ZE, Zeiss 2/28 Contax, Zeiss 2/35 ZE, Zeiss 1.4/50 Contax, Zeiss 1.4/85 Contax, Zeiss Makro 2/100 ZE,
Zeiss 2/135 Contax, Zeiss 2.8/135 Contax, Zeiss Vario-Sonnar 35-70 Contax, Zeiss Vario-Sonnar 100-300 Contax, Zeiss F-Distagon Rollei, Canon FD 24mm f2, Minolta MD Rokkor 35mm f2.8
Rangefinder:
Zeiss 4.5/21 C Biogon ZM, Zeiss 2/35 Biogon ZM, Voigtländer 15mm f/4.5 Heliar L39, Leica Tele-Elmarit 2.8/90mm, Zeiss 2/45 Contax G, Zeiss 2.8/90 Contax G, Canon 50mm 1.8 LTM
AF lenses: Canon 15mm f/2.8 Fisheye, Canon 24-70 f/2.8 L, Canon 70-200 f/2.8 L IS II, Canon 70-200 f/4 L, Canon 300 f/4 L IS, Canon 100 f/2.8 macro
|
|
| Back to top |
|
 |
Himself
 Joined: 01 Mar 2007 Posts: 3315 Location: Montreal
Expire: 2013-05-30
|
 Posted: Fri Nov 12, 2010 9:33 pm Post subject: |
|
 Posted: Fri Nov 12, 2010 9:33 pm Post subject: |
|
|
Himself wrote:
My thought is not vague.
It's just an information.
How you use it, it's up to you. _________________ Moderator Himself |
|
| Back to top |
|
 |
AhamB
 Joined: 22 Jun 2008 Posts: 733 Location: Germany
|
 Posted: Sat Nov 13, 2010 7:08 pm Post subject: |
|
 Posted: Sat Nov 13, 2010 7:08 pm Post subject: |
|
|
AhamB wrote:
| Himself wrote: |
My thought is not vague.
It's just an information.
How you use it, it's up to you. |
You're not even making a point. It's not that important who is making the panel. Many manufacturers use LG panels, but the backlights and electronics used to drive and control the panel are very different. Lower end manufacturers like Dell/HP/Apple will not have a system to control the brightness and colour of different parts of the screen (to ensure homogeneity), like NEC (and Eizo probably too) has. |
|
| Back to top |
|
 |
Nordentro
 Joined: 24 Jun 2010 Posts: 4738 Location: Lillehammer, Norway
Expire: 2015-01-29
|
 Posted: Sat Nov 13, 2010 7:50 pm Post subject: |
|
 Posted: Sat Nov 13, 2010 7:50 pm Post subject: |
|
|
Nordentro wrote:
I would suggest a 30" screen. I have a DeLL at home and a Samsung at work, both very nice s-ips panels. It's a little weird the first day or two with all the extra space, but when you have tried 2560 x 1600 px screen you never want to go back to any smaller  _________________ Lars | Manuellfokus.no |
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|