| View previous topic :: View next topic |
| Author |
Message |
martyn_bannister
 Joined: 23 May 2010 Posts: 1151
|
 Posted: Sun Oct 10, 2010 10:05 am Post subject: Tiny screws in lenses. What sizes & where to get some? |
|
 Posted: Sun Oct 10, 2010 10:05 am Post subject: Tiny screws in lenses. What sizes & where to get some? |
|
|
martyn_bannister wrote:
Hi there,
Don't know about you, but I have a penchant for finding lenses where the tiny srews are missing or the heads are chewed up. I also have a penchant for dropping such screws on the carpet and being unable to find them.
I know that the latter can be cured by setting up my lens dissembly area in a far more ordered manner
But as to the former, I have two real questions.
1) Is there a standard set of sizes used in lenses. e.g. are they metric, or is some sort of numbering standard used, as I believe the watch industry uses.
2) Does anyone know of a source of supply for these tiny screws. What would be ideal for me would be some place which can supply a good assortment and also replenish particular sizes/shapes.
Anyone got any info?
Thanks in advance. |
|
| Back to top |
|
 |
indianadinos
 Joined: 06 Jul 2008 Posts: 1310 Location: Toulouse, France
Expire: 2011-12-05
|
 Posted: Sun Oct 10, 2010 3:31 pm Post subject: Re: Tiny screws in lenses. What sizes & where to get som |
|
 Posted: Sun Oct 10, 2010 3:31 pm Post subject: Re: Tiny screws in lenses. What sizes & where to get som |
|
|
indianadinos wrote:
Hi,
| martyn_bannister wrote: |
2) Does anyone know of a source of supply for these tiny screws. What would be ideal for me would be some place which can supply a good assortment and also replenish particular sizes/shapes.
|
http://www.micro-tools.com ...
Cheers _________________ Please visit my blogs Shooting with a Pentax K10D / FF Visions
Takumar: 24/3.5, 28/3.5, 35/2, 35/3.5, 50/1.4, 55/1.8, 85/1.8, 105/2.8, 120/2.8, 135/3.5, 150/4, 200/4
Pentax-K: M28/2.8, K28/3.5, M50/1.4, A50/1.7, M50/4 Macro, K85/1.8, K105/2.8, K135/2.5, M200/4, M70-150/4
Zeiss: Flektogon 20/2.8, 20/4, 35/2.4, 35/2.8, Tessar 50/2.8, Pancolar 50/1.8, Biotar 58/2, Sonnar 135/3.5, Sonnar 180/2.8
Meyer: Primagon 35/4.5, Domiplan 50/2.8, Oreston 50/1.8, Primoplan 58/1.9, Trioplan 100/2.8, Orestor 100/2.8, Orestor 135/2.8
Schacht/Steinheil: Travenar 90/2.8, Travenon 135/4.5, Quinar 135/2.8, Quinar 135/3.5
Russian: MIR 37B, Industar 50/3.5, Helios 44M & 44M-2, Jupiter 37A
P6: Flektogon 50/4, Biometar 80/2.8, Orestor 300/4
Nikkor: Nikkor-O 35/2, Micro 55/3.5, Nikkor-S 50/1.4, Nikkor-Q 135/2.8
Fuji: EBC 28/3.5, EBC 55/3.5 Macro, EBC 135/2.5
Misc Lenses: Kiron 105/2.8 Macro, Tamron SP90/2.5
... and a few other Vivitar, Tamron, Sigma and Soligor lenses ...
|
|
| Back to top |
|
 |
martyn_bannister
 Joined: 23 May 2010 Posts: 1151
|
 Posted: Sun Oct 10, 2010 4:36 pm Post subject: Re: Tiny screws in lenses. What sizes & where to get som |
|
 Posted: Sun Oct 10, 2010 4:36 pm Post subject: Re: Tiny screws in lenses. What sizes & where to get som |
|
|
martyn_bannister wrote:
| indianadinos wrote: |
Hi,
| martyn_bannister wrote: |
2) Does anyone know of a source of supply for these tiny screws. What would be ideal for me would be some place which can supply a good assortment and also replenish particular sizes/shapes.
|
http://www.micro-tools.com ...
Cheers |
Nirvana! I can spend many happy hours browsing this I can see! |
|
| Back to top |
|
 |
themoleman342
 Joined: 21 Oct 2007 Posts: 2190 Location: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 Posted: Sun Oct 10, 2010 5:32 pm Post subject: |
|
 Posted: Sun Oct 10, 2010 5:32 pm Post subject: |
|
|
themoleman342 wrote:
If you're looking for specifically these types of screws:
Micro-Tools unfortunately does not have them as far as I know. I asked about a year ago.
I've never been able to find a source for them
~Marc |
|
| Back to top |
|
 |
Screamin Scott
 Joined: 13 Oct 2007 Posts: 1014 Location: Dallas, Georgia USA
|
 Posted: Sun Oct 10, 2010 5:49 pm Post subject: |
|
 Posted: Sun Oct 10, 2010 5:49 pm Post subject: |
|
|
Screamin Scott wrote:
The screws I need are even smaller than those in the photo... _________________ Cameras-Nikon D300, D7100,D610,FE2,FTN ,FT2,N90s, Olympus Pen EP-3 & Olympus OM-D E-M10
Nikkor AF Zooms=28-105/3.5D,28-70/3.5D,35-135/3.5, et al
Nikkor AF //50/1.8,//Nikkor MF//50/2ai,50/1.8ais 50/1.4ai,24/2.8ais,28/2.8ai,28/3.5ai,55microAis/2.8,105/2.5ai,200/4ai,300/4.5ai35-135/3.5Ais,et al
Kiron /Kino made lenses//70-210/4ai,28-105/3.2ai,30-80/3.5ai,Viv 28/2ai,35-85/2.8aiVivS1,105/2.8Ais Dine,24-48/3.8ai VivS1,50-150/3.8aiViv,28-85/2.8aiViv,100/2.8Nai Viv,70-210/3.5Nai Viv,28/2.5ai Viv Komine made Viv//24/2Ais,135/2.8aiCF,28-50/3.5ai,28-90/2.8ai Viv S1,80-200/4.5aiCosina made Viv 19/3.8 Ais...Also Sigma 24/2.8 Ais Tokina made24/2.8ai VivAF Sigma 21-35/3.5,& other lenses... A link to some of my Flickr albums...
https://www.flickr.com/photos/screaminscott/albums |
|
| Back to top |
|
 |
themoleman342
 Joined: 21 Oct 2007 Posts: 2190 Location: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 Posted: Sun Oct 10, 2010 5:52 pm Post subject: |
|
 Posted: Sun Oct 10, 2010 5:52 pm Post subject: |
|
|
themoleman342 wrote:
| Quote: |
| The screws I need are even smaller than those in the photo... |
Well it is a picture of the industar 50. So the lens is quite small to being with.  |
|
| Back to top |
|
 |
martyn_bannister
 Joined: 23 May 2010 Posts: 1151
|
 Posted: Sun Oct 10, 2010 6:37 pm Post subject: |
|
 Posted: Sun Oct 10, 2010 6:37 pm Post subject: |
|
|
martyn_bannister wrote:
I have gone off micro-tools anyway. I browsed their US site and they seemed to have no assortments of screws except in a kit for repairing eye glasses. They do, however, have taps and die sets and drill sets at very reasonable prices.
However, I cannot order from the US site for delivery to the UK. When I browsed their German site, not only did they have a very reduced range of taps/dies and drills, the sets they were selling were extremely expensive compared to the US prices. Why is this? |
|
| Back to top |
|
 |
Screamin Scott
 Joined: 13 Oct 2007 Posts: 1014 Location: Dallas, Georgia USA
|
 Posted: Sun Oct 10, 2010 6:41 pm Post subject: |
|
 Posted: Sun Oct 10, 2010 6:41 pm Post subject: |
|
|
Screamin Scott wrote:
Here's a shot of the size screws I'm needing
 _________________ Cameras-Nikon D300, D7100,D610,FE2,FTN ,FT2,N90s, Olympus Pen EP-3 & Olympus OM-D E-M10
Nikkor AF Zooms=28-105/3.5D,28-70/3.5D,35-135/3.5, et al
Nikkor AF //50/1.8,//Nikkor MF//50/2ai,50/1.8ais 50/1.4ai,24/2.8ais,28/2.8ai,28/3.5ai,55microAis/2.8,105/2.5ai,200/4ai,300/4.5ai35-135/3.5Ais,et al
Kiron /Kino made lenses//70-210/4ai,28-105/3.2ai,30-80/3.5ai,Viv 28/2ai,35-85/2.8aiVivS1,105/2.8Ais Dine,24-48/3.8ai VivS1,50-150/3.8aiViv,28-85/2.8aiViv,100/2.8Nai Viv,70-210/3.5Nai Viv,28/2.5ai Viv Komine made Viv//24/2Ais,135/2.8aiCF,28-50/3.5ai,28-90/2.8ai Viv S1,80-200/4.5aiCosina made Viv 19/3.8 Ais...Also Sigma 24/2.8 Ais Tokina made24/2.8ai VivAF Sigma 21-35/3.5,& other lenses... A link to some of my Flickr albums...
https://www.flickr.com/photos/screaminscott/albums |
|
| Back to top |
|
 |
visualopsins
 Joined: 05 Mar 2009 Posts: 11698 Location: California
Expire: 2027-07-11
|
 Posted: Sun Oct 10, 2010 6:52 pm Post subject: |
|
 Posted: Sun Oct 10, 2010 6:52 pm Post subject: |
|
|
visualopsins wrote:
Fine Jeweler tools. Fine mechanical watch tools. Finest kit should include drill, tap, & die sets for tiny screws, I think. _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Back to top |
|
 |
shauttra
 Joined: 17 Nov 2009 Posts: 778 Location: Latvia
|
 Posted: Sun Oct 10, 2010 7:12 pm Post subject: |
|
 Posted: Sun Oct 10, 2010 7:12 pm Post subject: |
|
|
shauttra wrote:
As my job is associated with optical glasses, i often use available screws with sizes from 0.8mm up to 1.6mm for replacing them in glasses  _________________ Mto-1000, Tair-3, Auto Exaktar 135mm 2,8, Samyang 14mm 2.8,
Jupiter 37A, Carl Zeiss Sonnar 135/3.5,
Helios-44, Mir-1, Revuenon 50/1.4,
Carl Zeiss Pancolar 50/1.8, Samyang 24/1.4, Auto Vivitar 35/2.8
www.radosi.lv
http://shauttra.blogspot.com
Last edited by shauttra on Mon Oct 11, 2010 10:43 am; edited 1 time in total |
|
| Back to top |
|
 |
martyn_bannister
 Joined: 23 May 2010 Posts: 1151
|
 Posted: Sun Oct 10, 2010 7:15 pm Post subject: |
|
 Posted: Sun Oct 10, 2010 7:15 pm Post subject: |
|
|
martyn_bannister wrote:
Found THESE on ebay...... No idea of the quality, but will let you know
For normal grub screws, piano wire comes in exact standard sizes which are pretty close to 1, 1.2, 1.4 mm etc. Really needs to be annealed before cutting the thread, but can be hardened and tempered back after cutting.
For set screws with a slotted head, an electric drill, a file and a v slot in a piece of steel should be close enough.
Now philips heads are going to be a lot trickier!  |
|
| Back to top |
|
 |
martyn_bannister
 Joined: 23 May 2010 Posts: 1151
|
 Posted: Sun Oct 10, 2010 7:16 pm Post subject: |
|
 Posted: Sun Oct 10, 2010 7:16 pm Post subject: |
|
|
martyn_bannister wrote:
| shauttra wrote: |
As my job is associated with optical glasses, i often use available screws with sizes from 0.8mm up to 1.6mm for replacing them in lenses  |
And where do you get the screws from please? |
|
| Back to top |
|
 |
shauttra
 Joined: 17 Nov 2009 Posts: 778 Location: Latvia
|
 Posted: Sun Oct 10, 2010 7:22 pm Post subject: |
|
 Posted: Sun Oct 10, 2010 7:22 pm Post subject: |
|
|
shauttra wrote:
| martyn_bannister wrote: |
| shauttra wrote: |
As my job is associated with optical glasses, i often use available screws with sizes from 0.8mm up to 1.6mm for replacing them in lenses  |
And where do you get the screws from please? |
we have suplier from France - Technidis
http://www.technidis.eu/site_anglais/sommaire_public.php
but i think you should wisit some nearest optical shop where they have an optical technician. _________________ Mto-1000, Tair-3, Auto Exaktar 135mm 2,8, Samyang 14mm 2.8,
Jupiter 37A, Carl Zeiss Sonnar 135/3.5,
Helios-44, Mir-1, Revuenon 50/1.4,
Carl Zeiss Pancolar 50/1.8, Samyang 24/1.4, Auto Vivitar 35/2.8
www.radosi.lv
http://shauttra.blogspot.com |
|
| Back to top |
|
 |
martyn_bannister
 Joined: 23 May 2010 Posts: 1151
|
 Posted: Sun Oct 10, 2010 7:51 pm Post subject: |
|
 Posted: Sun Oct 10, 2010 7:51 pm Post subject: |
|
|
martyn_bannister wrote:
| shauttra wrote: |
| martyn_bannister wrote: |
| shauttra wrote: |
As my job is associated with optical glasses, i often use available screws with sizes from 0.8mm up to 1.6mm for replacing them in lenses  |
And where do you get the screws from please? |
we have suplier from France - Technidis
http://www.technidis.eu/site_anglais/sommaire_public.php
but i think you should wisit some nearest optical shop where they have an optical technician. |
That's a good idea  |
|
| Back to top |
|
 |
peterqd
 Joined: 28 Feb 2007 Posts: 7449 Location: near High Wycombe, UK
Expire: 2014-01-04
|
 Posted: Sun Oct 10, 2010 9:34 pm Post subject: |
|
 Posted: Sun Oct 10, 2010 9:34 pm Post subject: |
|
|
peterqd wrote:
Martyn, H S Walsh in Beckenham are the most well-known watchmakers suppliers in UK. They sell various types of watch and clock screws in bulk assortments:
http://www.hswalsh.com/search.aspx?s1=screws&s2=&s3=&f=1&l=10 _________________ Peter - Moderator |
|
| Back to top |
|
 |
Lloydy
 Joined: 02 Sep 2009 Posts: 7880 Location: Ironbridge. UK.
Expire: 2022-01-01
|
 Posted: Sun Oct 10, 2010 10:49 pm Post subject: |
|
 Posted: Sun Oct 10, 2010 10:49 pm Post subject: |
|
|
Lloydy wrote:
| martyn_bannister wrote: |
I have gone off micro-tools anyway. I browsed their US site and they seemed to have no assortments of screws except in a kit for repairing eye glasses. They do, however, have taps and die sets and drill sets at very reasonable prices.
However, I cannot order from the US site for delivery to the UK. When I browsed their German site, not only did they have a very reduced range of taps/dies and drills, the sets they were selling were extremely expensive compared to the US prices. Why is this? |
Because we've been ripped off for generations, and it's now a way of life.  _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Back to top |
|
 |
Excalibur
 Joined: 19 Jul 2009 Posts: 5018 Location: UK
Expire: 2014-04-21
|
 Posted: Mon Oct 11, 2010 7:38 am Post subject: |
|
 Posted: Mon Oct 11, 2010 7:38 am Post subject: |
|
|
Excalibur wrote:
Opticians have tiny screws to replace the ones in spectacle frames (when they fall out). _________________ Canon A1, AV1, T70 & T90, EOS 300 and EOS300v, Chinon CE and CP-7M. Contax 139, Fuji STX-2, Konica Autoreflex TC, FS-1, FT-1, Minolta X-700, X-300, XD-11, SRT101b, Nikon EM, FM, F4, F90X, Olympus OM2, Pentax S3, Spotmatic, Pentax ME super, Praktica TL 5B, & BC1, , Ricoh KR10super, Yashica T5D, Bronica Etrs, Mamiya RB67 pro AND drum roll:- a Sony Nex 3
.........past gear Tele Rolleiflex and Rollei SL66.
Many lenses from good to excellent. |
|
| Back to top |
|
 |
martyn_bannister
 Joined: 23 May 2010 Posts: 1151
|
 Posted: Mon Oct 11, 2010 4:53 pm Post subject: |
|
 Posted: Mon Oct 11, 2010 4:53 pm Post subject: |
|
|
martyn_bannister wrote:
| Lloydy wrote: |
Because we've been ripped off for generations, and it's now a way of life.  |
Too true  |
|
| Back to top |
|
 |
martyn_bannister
 Joined: 23 May 2010 Posts: 1151
|
 Posted: Mon Oct 11, 2010 4:59 pm Post subject: |
|
 Posted: Mon Oct 11, 2010 4:59 pm Post subject: |
|
|
martyn_bannister wrote:
| Excalibur wrote: |
| Opticians have tiny screws to replace the ones in spectacle frames (when they fall out). |
I looked at the link that shauttra posted and the screws for glasses might be the right thread, but don't seem to have the correct heads. Most camera screws are either grub screws (i.e. no head) or set screws with pan heads (either slotted or crosshead).
The link that peterqd posted to H S Walsh seems to have a better chance of success. I will need to plough through the myriad of different packs they offer to see which ones will be best suited. If I get a result I'll be sure to post the link!  |
|
| Back to top |
|
 |
magkelly
 Joined: 06 Jul 2010 Posts: 182
|
 Posted: Mon Oct 11, 2010 7:42 pm Post subject: |
|
 Posted: Mon Oct 11, 2010 7:42 pm Post subject: |
|
|
magkelly wrote:
I'd try your local optical shop and your local watch repair guy. Even if they don't have them to sell they might be able to direct you to a local source you can guy such things from. |
|
| Back to top |
|
 |
Lloydy
 Joined: 02 Sep 2009 Posts: 7880 Location: Ironbridge. UK.
Expire: 2022-01-01
|
 Posted: Mon Oct 11, 2010 8:22 pm Post subject: |
|
 Posted: Mon Oct 11, 2010 8:22 pm Post subject: |
|
|
Lloydy wrote:
I got some screws, and tiny springs, to repair a lens off a friend of mine who builds slot racing cars, so the model world offers another choice as well. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Back to top |
|
 |
shauttra
 Joined: 17 Nov 2009 Posts: 778 Location: Latvia
|
 Posted: Mon Oct 11, 2010 9:15 pm Post subject: |
|
 Posted: Mon Oct 11, 2010 9:15 pm Post subject: |
|
|
shauttra wrote:
I usually make these heads smaller in diameter on fine grain diamond disc, until they fit in thread hole. Yes, i like the fine work  _________________ Mto-1000, Tair-3, Auto Exaktar 135mm 2,8, Samyang 14mm 2.8,
Jupiter 37A, Carl Zeiss Sonnar 135/3.5,
Helios-44, Mir-1, Revuenon 50/1.4,
Carl Zeiss Pancolar 50/1.8, Samyang 24/1.4, Auto Vivitar 35/2.8
www.radosi.lv
http://shauttra.blogspot.com |
|
| Back to top |
|
 |
OM
 Joined: 15 Jan 2010 Posts: 166 Location: Southern England
|
 Posted: Tue Oct 12, 2010 11:18 am Post subject: |
|
 Posted: Tue Oct 12, 2010 11:18 am Post subject: |
|
|
OM wrote:
| Lloydy wrote: |
| I got some screws, and tiny springs, to repair a lens off a friend of mine who builds slot racing cars, so the model world offers another choice as well. |
I also picked up a couple of packs of assorted micro screws from a radio control model shop - it may be a cheap source. |
|
| Back to top |
|
 |
Lightshow
 Joined: 04 Nov 2011 Posts: 3666 Location: Calgary
|
 Posted: Tue May 30, 2017 8:07 pm Post subject: |
|
 Posted: Tue May 30, 2017 8:07 pm Post subject: |
|
|
Lightshow wrote:
https://www.fastenersclearinghouse.com/fch/main.nsf/fSearch?OpenForm&Start=1&type=R&Cat1=PRM7DED642D2914;&Cat2=FL39EA6ECF529;&Cat3=&Cat4=&Cat5=M1&Cat6=&Cat7=
I hope that link works.
A different source
http://www.unisteeltech.com/fasteners/micro-screws.html
I don't know if they have minimums. _________________ A Manual Focus Junky...
One photographers junk lens is an artists favorite tool.
My lens list
http://www.flickr.com/photos/lightshow-photography/ |
|
| Back to top |
|
 |
Eddie46
 Joined: 05 Dec 2016 Posts: 135 Location: cardiff,UK
|
 Posted: Sat Jun 10, 2017 10:40 pm Post subject: |
|
 Posted: Sat Jun 10, 2017 10:40 pm Post subject: |
|
|
Eddie46 wrote:
Another useful source in the UK for diddy screws and springs.
https://www.prime-miniatures.co.uk/catalog/threaded-rod |
|
| Back to top |
|
 |
|
|