| View previous topic :: View next topic |
| Author |
Message |
darrenw
Joined: 27 Jul 2010 Posts: 47 Location: Richmond BC Canada
Expire: 2014-01-10
|
 Posted: Sat Oct 02, 2010 2:26 am Post subject: help...focus errors on camera bodies |
|
 Posted: Sat Oct 02, 2010 2:26 am Post subject: help...focus errors on camera bodies |
|
|
darrenw wrote:
I seem to have a problem that eludes me and was wondering if someone has had similar and if there is a solution to it.
Problem: I have a Canon D60 (the second generation digital, but it works fine) that no matter what I try does not seem to be able to focus with MF lenses. I have the original focus screen (again) in it as well have just tried a Haoda screen, with and without the copper shim, but all of them back focus substantially. I put an AF lens on and it focuses fine, both the pics and the viewfinder appear sharp.
I thought maybe it is the lenses but put them on my 40D and no problem, the viewfinder is sharp and the subsequent pic is as well.
Has anyone every had this problem? Was there a solution?
I am at a total loss as to understand why the viewfinder and pic is sharp and clear with an AF lens but will not take a sharp pic with a MF lens - and the distance scale is clearly showing that the lens is no where near the focus point being aimed at.
Any input would be appreciated.
Thanks
Darren |
|
| Back to top |
|
 |
poilu
 Joined: 26 Aug 2007 Posts: 10476 Location: Greece
Expire: 2019-08-29
|
 Posted: Sat Oct 02, 2010 4:20 am Post subject: |
|
 Posted: Sat Oct 02, 2010 4:20 am Post subject: |
|
|
poilu wrote:
Hi Darren,
the screen need different shim
is the Haoda made for the D60 or is it possible you have mounted it reversed _________________ T* |
|
| Back to top |
|
 |
darrenw
Joined: 27 Jul 2010 Posts: 47 Location: Richmond BC Canada
Expire: 2014-01-10
|
 Posted: Sat Oct 02, 2010 5:27 am Post subject: |
|
 Posted: Sat Oct 02, 2010 5:27 am Post subject: |
|
|
darrenw wrote:
Hi Poilu
Your suggestion would seem to be a solution but if that were the case why would the stock screen not allow me to correctly focus? I would not question this except for the fact that it doesn't work with a known "working" screen - that and the fact that I can simply put it on another camera body and all is well. This is what is confusing me. The stock screen and shim do not work. I have tried 2 different aftermarket screens with and without the shim. (The Haoda and a cheap Chinese one, which in fact they accidentally shipped me two so I tried first adding tape but quickly found I was going in the wrong direction so I filed it down trying to sort this out and it was close but I wasn't very accurate and it didn't work all the time due to poor fit). The Haoda screen was made for the D60 but it took 8 weeks to get as Haoda mis-shipped it the first time and I just received it today and tried it both with and without the shim; no luck. I should also note that the shim did impove the focus from my little tests - the back focus was less with the shim installed so it would seem logical to add more thickness at this point. The D60 wasn't designed to have the screen constantly replaced so it is a bit of an issue taking things apart and trying again.
It baffles me. The things that can mess with focus are...
1. lens flange distance (which I know is correct or it would be a problem on another camera body and it isn't)
2. screen distance/position (this is certainly the top suspect but which way to move, in or out...but why would the stock screen not work then as it seems to function well with an AF lens??).
3. DOF errors from slow AF lens to faster MF lens (Is this the real problem and the faster MF lens with shallower DOF be proving out the stock screen is really not correct but being hidden by the slower len's DOF?) MF lens f1.8, AF lens f3.5-6.3
Have I missed anything?
I am not sure which way to turn and hence the question.
If it is the shim thickness where would one find another shim and how much thicker a shim???? I'm stumped. What should be my next move as I would really prefer to have this camera work with MF lenses?
Take care |
|
| Back to top |
|
 |
poilu
 Joined: 26 Aug 2007 Posts: 10476 Location: Greece
Expire: 2019-08-29
|
 Posted: Sat Oct 02, 2010 6:00 am Post subject: |
|
 Posted: Sat Oct 02, 2010 6:00 am Post subject: |
|
|
poilu wrote:
Hi Darren
if the stock screen doesn't have matte part, it is not enough accurate for focusing
the screen distance must be exact to less than 0.1 mm, otherwise it would work for some lens and not for other
you have to use this chart to check how accurate is the focus
the split is not enough accurate for lens faster than 2.8, better use the matte part or a screen made for fast lens
I have lost many hours shimming my 400D for a not perfect result, even at 0.1mm precision shim
you have to accept that body without interchangeable screen are targeted for AF lenses and will not give perfect result with manual lenses, starting from the small viewfinder
my 40D and 5DII was factory perfect, it was a revelation for me, with the 400D manual focus was not a pleasing experience
if you cannot shim to perfect result on the D60, one solution could be to use adapter with programmable chip and focus with the confirm led _________________ T* |
|
| Back to top |
|
 |
darrenw
Joined: 27 Jul 2010 Posts: 47 Location: Richmond BC Canada
Expire: 2014-01-10
|
 Posted: Sat Oct 02, 2010 11:16 pm Post subject: |
|
 Posted: Sat Oct 02, 2010 11:16 pm Post subject: |
|
|
darrenw wrote:
Poilu, thank you very much. Everything you say makes perfect sense to me. After I read your reply last night and thought about it I knew the screes position really had to be the issue and then thought about the shimming. I am not sure what I will shim with yet...wondering if I should try to find some sheet material and cut out a copy of the original shim and then stack as needed. I'll get to this project sometime early next week. I was going to use a meter stick to focus at but your that chart you linked me to is wonderful.
Thank you again.
Darren |
|
| Back to top |
|
 |
visualopsins
 Joined: 05 Mar 2009 Posts: 11698 Location: California
Expire: 2027-07-11
|
 Posted: Sun Oct 03, 2010 4:09 am Post subject: |
|
 Posted: Sun Oct 03, 2010 4:09 am Post subject: |
|
|
visualopsins wrote:
| Quote: |
| 3. DOF errors from slow AF lens to faster MF lens (Is this the real problem and the faster MF lens with shallower DOF be proving out the stock screen is really not correct but being hidden by the slower len's DOF?) MF lens f1.8, AF lens f3.5-6.3 |
part of the problem, yes...
| Quote: |
| the viewfinder and pic is sharp and clear with an AF lens |
but with MF lens and the same focus screen?:
| Quote: |
| the distance scale is clearly showing that the lens is no where near the focus point being aimed at. |
cannot reach infinity focus? how about when MF lens is set to f/3.5? If no, then the adapter isn't completely seating on D60 mount. Lens isn't close enough to D60 sensor.
| Quote: |
| put them on my 40D and no problem |
Nothing wrong with lens or adapter. Only trouble is mounting on D60.
What lens? _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Back to top |
|
 |
darrenw
Joined: 27 Jul 2010 Posts: 47 Location: Richmond BC Canada
Expire: 2014-01-10
|
 Posted: Sun Oct 03, 2010 5:31 am Post subject: |
|
 Posted: Sun Oct 03, 2010 5:31 am Post subject: |
|
|
darrenw wrote:
Hi visualopsins,
I hadn't tried to this point any aperture settings on the MF lens as I was hoping the new Haoda screen would just drop and and all would work well. The screen works well but I think this old D60 wasn't that great from the factory.
I switched back to the stock screen and went through some motions that got me to the point with poilu's help that it really must be the position of the focus screen based on the fact that the other body using the same adapter works perfectly and that the slow AF lens is masking (via DOF) the real error. The other thing I haven't tried yet is to compare the EF 50/1.8 II with the 50/1.8 MF lens and see where that leads me....
That all said I need to figure out how much of a shim I need and then get some material and make the shim. I've been over to www.smallparts.com and they have a variety of materials but how thick a shim is the question. I've gone this far and spent enough $$$ I may as well sort this thing out properly and then it will be good to go play instead of repair.
To your question about which lens, I was testing it with a Rollei Planar 50/1.8 HFT that I just got. The other lenses that will mostly get used on it will be a rather strange pair I found locally, a Universar 35/2.8 and a Prinzflex 23/3.5. I will see how this trio works out for a while.
Take care. |
|
| Back to top |
|
 |
GGordon
Joined: 16 Oct 2010 Posts: 1 Location: Mountains of North Carolina
|
 Posted: Sat Oct 16, 2010 4:45 pm Post subject: |
|
 Posted: Sat Oct 16, 2010 4:45 pm Post subject: |
|
|
GGordon wrote:
Hi,
I don't feel you have a focusing screen issue and that the problem lies with the distance from the lens bayonet to the sensor. To verify a focus screen issue you could open the lens up to say f/16 and try that. If the entire image is OOF then I would say it absolutely is the bayonet to sensor distance. If it is just the infinity distances that is OOF an adjustment to the lens is possible via the top of the lens, if you are so inclined.
I did a flange change on my 40D to take Minolta MF lenses. While the flange works great, on the more wide lenses far infinity needs adjustment on the lenses. Since I use them on Minlta MF cameras I have not bothered. My Katz Eye focus screen needs a bit of a shim but only the thickess of a couple of strips of tape.
For your sake I hope I am wrong and it is just the focusing screen needing a shim, but........
Gil _________________ Canon EOS, Konica MF, Minolta MF, Canon EOS/Minolta MF Combo (via flange change) |
|
| Back to top |
|
 |
darrenw
Joined: 27 Jul 2010 Posts: 47 Location: Richmond BC Canada
Expire: 2014-01-10
|
 Posted: Sun Oct 17, 2010 4:27 am Post subject: |
|
 Posted: Sun Oct 17, 2010 4:27 am Post subject: |
|
|
darrenw wrote:
Thanks for the tip Gil. I haven't had time to sort it out yet but I do not suspect it to be the flange distance. I guess I will know soon enough though....try to do it this coming week if I can get a moment. |
|
| Back to top |
|
 |
ZeiEizh
 Joined: 13 Jul 2010 Posts: 223 Location: Helsinki
|
 Posted: Sun Oct 17, 2010 7:36 am Post subject: |
|
 Posted: Sun Oct 17, 2010 7:36 am Post subject: |
|
|
ZeiEizh wrote:
| GGordon wrote: |
Hi,
I don't feel you have a focusing screen issue and that the problem lies with the distance from the lens bayonet to the sensor. To verify a focus screen issue you could open the lens up to say f/16 and try that. If the entire image is OOF then I would say it absolutely is the bayonet to sensor distance. If it is just the infinity distances that is OOF an adjustment to the lens is possible via the top of the lens, if you are so inclined.
I did a flange change on my 40D to take Minolta MF lenses. While the flange works great, on the more wide lenses far infinity needs adjustment on the lenses. Since I use them on Minlta MF cameras I have not bothered. My Katz Eye focus screen needs a bit of a shim but only the thickess of a couple of strips of tape.
For your sake I hope I am wrong and it is just the focusing screen needing a shim, but........
Gil |
I was thinking the same. Too thick/thin adapter. _________________ BODY:Canon 5DII
AF-LENS: Tokina 80-400 AT-X D f4,5-5,6; Tokina 100 AT-X Macro f2,8; Sigma 28mm EF DG 1:2 Macro f1.8;
MF-LENS: Mamiya Sekor EF 50mm f1,7; Vivitar 200mm f3,5; MTO ZM-5A 500mm f8 mirror. Rikenon XR 50 F2; Rikenon XR 135 F2,8 |
|
| Back to top |
|
 |
darrenw
Joined: 27 Jul 2010 Posts: 47 Location: Richmond BC Canada
Expire: 2014-01-10
|
 Posted: Mon Oct 18, 2010 5:16 am Post subject: |
|
 Posted: Mon Oct 18, 2010 5:16 am Post subject: |
|
|
darrenw wrote:
Hi Guys, thanks for the input. It got me thinking but now I am a little more confused. I have been playing a little bit at my desk with the camera and several lenses, both MF and AF and here's what I got.
Distance from subject approx 1m.
On Canon D60 body:
........................Viewfinder....Picture...aperture
Sigma 18-200DC AF...........in focus....in focus.... f6.3 +/-
Sigma 18-200DC MF... in focus... in focus... same
Micro Nikkor 105/4 MF... in focus... in focus... f4
Vivitar S1 35-85/2.8 MF... in focus... in focus... f2.8
Rollei 50/1.8 MF... in focus... NOT in... f1.8
Rollei 50/1.8 MF... in focus... NOT but better... f4
Universar 35/2.8 MF (M42)... in focus... NOT... f2.8
On Canon 40D body
All lenses in focus both on focus screen and in picture displayed in CS3.
So does this mean that it is still the focus screen distance being out because the fast lenses work on another body but not on the D60? The greater DOF is fooling me with the AF lens and the f4 MF lens? SHould I still be looking at the screen shims or the lens mount? I do not see how it could be the lens adapter thickness if the lens works on the 40D body.
I could conceivably setup the lenses to work only on that body but that isn't really a solution in the long run.
 |
|
| Back to top |
|
 |
pat donnelly
 Joined: 19 Jan 2010 Posts: 666 Location: Brisbane, Australia
|
 Posted: Mon Oct 18, 2010 11:59 am Post subject: Not sure if I can help but....... |
|
 Posted: Mon Oct 18, 2010 11:59 am Post subject: Not sure if I can help but....... |
|
|
pat donnelly wrote:
I hope you have found a solution, but to wear you down, maybe you might:
Set focus to infinity
Hand hold the manual lens
Position the MF lens on a flat surface raised, so that you can move the camera body, also on the flat surface, as to achieve accurate focus at both close, mid and inf focus points.
Measure the results that you get and see how well placed the mf adaptor is in relation to the results? The measure needs to be sensitive near the mouth of the camera, measured consistently....
After all that, have a strong cup of Tea! _________________ ---------------------------------
EP-1, E-410, E-300, D100, D1,
C-Mt: 25mm 1.9, 75mm 1.4, 75mm 1.3, 75mm 1.9, Ultra wides, one inch sensor, 20+ c-mount zooms
OM 350mm f2.8, Nikkor 180 f2.8, Exa 180 f2.8,
Tamrons: 90mm f2.5, 500mm f8 x3, 135 f2.5, 200 f3.5, 24mm 2.5, 28mm 2.5 x8,
FD 500mm mirror lens |
|
| Back to top |
|
 |
yinyangbt
 Joined: 08 Oct 2010 Posts: 1973 Location: Romania
Expire: 2012-12-27
|
 Posted: Mon Oct 18, 2010 5:53 pm Post subject: |
|
 Posted: Mon Oct 18, 2010 5:53 pm Post subject: |
|
|
yinyangbt wrote:
| GGordon wrote: |
I did a flange change on my 40D to take Minolta MF lenses. While the flange works great, on the more wide lenses far infinity needs adjustment on the lenses. Since I use them on Minlta MF cameras I have not bothered. My Katz Eye focus screen needs a bit of a shim but only the thickess of a couple of strips of tape.
Gil |
Gil , what wide lenses do need adjustment ? sorry for the off topic _________________ Cheers , Teo
http://photo.net/photodb/member-photos?user_id=5778915 |
|
| Back to top |
|
 |
visualopsins
 Joined: 05 Mar 2009 Posts: 11698 Location: California
Expire: 2027-07-11
|
 Posted: Mon Oct 18, 2010 8:19 pm Post subject: |
|
 Posted: Mon Oct 18, 2010 8:19 pm Post subject: |
|
|
visualopsins wrote:
| darrenw wrote: |
Hi Guys, thanks for the input. It got me thinking but now I am a little more confused. I have been playing a little bit at my desk with the camera and several lenses, both MF and AF and here's what I got.
Distance from subject approx 1m.
On Canon D60 body:
........................Viewfinder....Picture...aperture
Sigma 18-200DC AF...........in focus....in focus.... f6.3 +/-
Sigma 18-200DC MF... in focus... in focus... same
Micro Nikkor 105/4 MF... in focus... in focus... f4
Vivitar S1 35-85/2.8 MF... in focus... in focus... f2.8
Rollei 50/1.8 MF... in focus... NOT in... f1.8
Rollei 50/1.8 MF... in focus... NOT but better... f4
Universar 35/2.8 MF (M42)... in focus... NOT... f2.8
On Canon 40D body
All lenses in focus both on focus screen and in picture displayed in CS3.
So does this mean that it is still the focus screen distance being out because the fast lenses work on another body but not on the D60? The greater DOF is fooling me with the AF lens and the f4 MF lens? SHould I still be looking at the screen shims or the lens mount? I do not see how it could be the lens adapter thickness if the lens works on the 40D body.
I could conceivably setup the lenses to work only on that body but that isn't really a solution in the long run.
 |
The results show trouble focusing MF lens f/2.8 or faster (got lucky with Vivitar zoom).
All the equipment is working fine. D60 focus screen is designed for lens slower than f/2.8 -- it cannot accurately see depth of field of lenses f/2.8 and faster. Faster focus screen needed. _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Back to top |
|
 |
|
|