Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!

SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Olympus 35RC - cosmetic refurb
View previous topic :: View next topic  


PostPosted: Sun Jun 02, 2013 3:09 pm    Post subject: Olympus 35RC - cosmetic refurb Reply with quote

Just bought an Olympus 35RC from a fellow member, philslizzy. (Thanks for the good price and smooth transaction, Phil). Phil had fitted new seals and the lens and camera interior are in mint condition. The exterior however was a bit "tired and listless". So...ah decided tae do my first cosmetic refurb - new leather. This is probably the easiest camera to do, as it has no self-timer/sync plugs or any other difficulties on the body. Straightforward, apart from cutting the half-circles tae accomodate the lens.

Removing the old leather was easy and the original glue was still tacky enough tae be stuck down again (if ah messed up!). Ah used the original leather as templates tae cut the new leather, adding around 1-1.5 mm. tae allow for shrinkage on the old leather.


#1



Almost all the glue residue was simply removed by rubbing with thumb/fingers. Rubbed down flaked paint with emery paper,then used propanol and cotton buds tae clean the camera body.

#5


#1




After the body was clean, ah used my "go to" brightwork cleaners. Car body/ paintwork scratch removers. Used this stuff for years, even on metalwork on lenses. First tried it on an old, unsaveable camera tae ensure there were no after effects but still...use at yer own risk! Rub it in with cotton buds (good pressure tae work the scratch), leave for half an hour then polish off with clean rags/microfibre cloths. Usually do this twice.





Then touched up the black paint with a paint marker. It's really only for scratch touch-up but was fine after a couple of coats for a larger area. When the paint was nearly dried, ah rubbed my finger round the painted bits and that was enough tae remove the very glossy finish back tae the matte of the original paint. Even used the marker for chip marks on my bike!



Bought a bottle of Pliobond (Microtools) but didn't need it, as the glue on the new leather was excellent.

Leather and marker from Millys cameras... http://cameramill.co.uk/shop/
Microtools... http://www.micro-tools.de/

Here's the results...




Couple of larger images...

#8

#9


PostPosted: Sun Jun 02, 2013 6:54 pm    Post subject: Reply with quote

I want it back!!

How did the shiny bits come up? You said you'd show.


PostPosted: Sun Jun 02, 2013 8:18 pm    Post subject: Reply with quote

Here're the shiny bits , Phil . Plenty of marks left but the vast majority are well concealed or reduced greatly Cool ...









PostPosted: Sun Jun 02, 2013 9:49 pm    Post subject: Reply with quote

Great success! Many thanks to sharing it!


PostPosted: Sun Jun 02, 2013 11:52 pm    Post subject: Reply with quote

great work. A nice conservative custom. My RC misses his bro, now living in Scotland in the city of Discovery. here he is looking sad but beautiful in his burgundy jacket.



they're reflections on his front from the laptop.