MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Lens cleaning ROR
View previous topic :: View next topic  


Reply

Any experience ?

Click here to see on Ebay


Reply

I bought three bottles of this solution from a retiring camera store owner. It works as advertised, which is to say - very well. It's a purified 1% ammonia solution, so it's pretty conservative and safe on glass and coated plastic surfaces (depending, of course, on the cloth/tissue used).

BTW, I bought several hundred (!) optical tissues from the same retiring owner. These usually sell for $5 in optical stores; I got them for about 50 cents each. They work quite well on lenses; my wife uses them and ROR on her eyeglasses made of coated optical plastic, with good results and no damage so far after a year of everyday use. If you need a few of those, I can mail a couple for the price of shipping (PM if interested).


Reply

Just ordered some here in the US for a fraction of the UK cost - $4.99 for two bottles. Will report on results



patrickh


Reply

The Kodak Lens Cleaner contains ammonium carbonate. More or less the same with the ROR.


Reply

You should be able to get it cheaper than that on ebay, but stick with the dropper bottles as the spray bottles are impractical imo.`


Reply

calvin83 wrote:
The Kodak Lens Cleaner contains ammonium carbonate. More or less the same with the ROR.


Pretty much. About any ammonia solution that is pure enough and contains less than 1% of ammonia are good (and safe) for cleaning lenses. I think you can buy generic one in most pharmacies (they usually have 0.5% ammonia and distilled water) for less than camera stores sell it.


Reply

Have been using ROR for several years. It was recommended by one of the Hasselblad engineers who would come to Ireland to demo new kit for us - a good enough reference for me.