MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

An easy way to salvage underexposed digicam photos
View previous topic :: View next topic  


Reply

I accidentally bumped into an easy way of getting quite reasonable B&W photos out of even very underexposed digicam shots. I was post-processing some of the photos I had taken in the very dimly lit Uspensky Cathedral and while working in LAB space I noticed that the L layer presented an almost normally exposed B&W image. Here is the tell-tale shot, first in colour:



then the L layer:



Having noticed this, I dug up some old photos taken with a Sony DSC-F505 and started experimenting. Here is a representative image pair, a photo taken without flash in a candle-lit restaurant:



The original seems almost hopeless, but the B&W version is quite OK for many purposes and , IMHO, much preferable to a photo taken with flash:



The procedure is very easy: 1) convert into LAB space and 2) delete the A and B layers leaving just the L layer. That's it unless you want to adjust the black level or contrast, but that isn't usually necessary. It couldn't be much easier or faster.

More digicam examples at http://galactinus.net/vilva/retro/lab_bw.html

Veijo


Reply

Yes, the LAB-mode is really useful (also for sharpening problematic pictures).
Noise is clearly visible, but it resembles the classical film grain which kind of suits a b&w shot well.

Thanks for posting.


Reply

Looks like I really should upgrade from PSE2..... Laughing

Thanks for the heads up. Cool

I've converted problematic colour images to B&W in the past with good results but obviously not using this method as PSE2 doesn't have LAB mode.


Reply

LucisPictor wrote:
Yes, the LAB-mode is really useful (also for sharpening problematic pictures)


Suitably sharpening the L layer gives a lot of punch even to the Cooke photos, here is a 5D crop after slight L layer USM:



Veijo


Reply

bob955i wrote:
Looks like I really should upgrade from PSE2..... Laughing

Thanks for the heads up. Cool

I've converted problematic colour images to B&W in the past with good results but obviously not using this method as PSE2 doesn't have LAB mode.


Get GIMP, it's free,

Veijo


Reply

Veijo wrote:
Get GIMP, it's free,


Just have.... Cool


Reply

Try gimpshop:

http://plasticbugs.com/?page_id=294