MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Tamron 200mm adaptall without mount
View previous topic :: View next topic  


Reply

Today I found a tamron 200mm f/3.5 without a proper mount (see the image below where it is situated next to a proper one).

Is there a way to get this baby working again?


Reply

Yes, you can find adapter virtually for any camera. I am unsure adaptall-2 mount is okay or not. I am sure oldest mount Adaptall works fine.


Reply

Attila, the adapter is not the problem, but attaching an adapter if there is no mount to clip it on to!


Reply

ooh sorry, I couldn't realize it.


Reply

Looks like it misses some aperture parts also, is it wide open all time? Confused


Reply

Hello, there.
I see two options here.
#1. The right one. Try to find an Adaptall in far worst condition, beyond repair that is, which have of course to sell for peanuts. Then cannibalize the mount to fix yours.
#2. The contraption. Try to fabricate someway a mount from various spare parts. Let's say a cheap M42 to EOS, a few washers/spacers, a cheapo extension tube and work out something useful.

Cheers, M.-


Reply

marty wrote:
Hello, there.
I see two options here.
#1. The right one. Try to find an Adaptall in far worst condition, beyond repair that is, which have of course to sell for peanuts. Then cannibalize the mount to fix yours.
#2. The contraption. Try to fabricate someway a mount from various spare parts. Let's say a cheap M42 to EOS, a few washers/spacers, a cheapo extension tube and work out something useful.


Problem is that adaptall mounts are not all similar on the lens side ..
I'd go for the # 2 assuming you can get the aperture working.


Reply

kansalliskala wrote:
Problem is that adaptall mounts are not all similar on the lens side ..
Hello. I was suggesting replacing the missing lens mount with an identical one from a really cheap non repairable lens to be able using a proper Adaptall ring in the needed flavor. Smile

Cheers, M.-


Reply

the aperture control is no problem it has an Manual/Automatic switch.
Indeed the best thing is to find an otherwise useless tammy.

Thanks for your postings.