MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

C/Y to SA mount?
View previous topic :: View next topic  


Reply

Are there any devices? Thanks!


Reply

It is not possible, but there are some other possibilities:

1. I remember someone selling replacement C/Y mount for Sigma cameras... but you could only use C/Y lenses than

2. there are some replacement sets, which can replace C/Y mount of Zeiss lenses to Pentax mount... pentax mount is compatible to Sigma mount - the main difference is 1.5mm register distance... not a problem for tele lenses, but wide-angle lenses would focus over infinity in majority of it's focusing range... solution is 1.5mm spacer between mount and lens, but the original screws aren't likely long enough, so longer screws would be necessary also


Reply

It's weird. There're contax to EF mount adapter, SA and EF have the same registry distance. Maybe i can come with something up for it! Razz


Reply

I have a problem - I have the japanese version of the C/Y Sonnar 135mm 2.8, and this one doesnt have screws on the mount..... is there a guide telling how to take the mount appart?


Reply

a20010494 wrote:
It's weird. There're contax to EF mount adapter, SA and EF have the same registry distance. Maybe i can come with something up for it! Razz


The diameter of the mount is bigger on EF so C/Y can fit inside. SA is too small so you have to change the mount on the lens or the camera.


Reply

Thanks for your reply, that's my point. I want to change the mount of the lens, but i want to take the mount appart, but i dont have a clue.


Reply

There are two screws on the back, but not in the usual place, have you tried those?


Reply

Yeah, 2 on the small protruding metal thingy, so, i unscrewed 4... and cant move it yet Embarassed


Reply

Sounds like you have the AE versionof this lens. I took one apart last year and ended up ruining the mount, so let me tell you right of the bat do not take it apart unless you got your lens cheaply and you are willing to experiment, and have access to a machine shop. This man has modified some to Sony mount- you can check it out here http://www.flickr.com/photos/myrtus21/sets/72157618817199308/.
The plate on the back on this has some small screws and glue that holds it down to another plate right below it. This other plate has the helical alignment rods screwed to it on the plate (not the barrel).This plate is one piece with the barrell. I was successful in taking the lens apart from the front. I used rubber band to torque the front rim and unscrew it in that manner. Having said all of that I do not think its practical or to attempt this modification,unless you have already destroyed part of the lens I would consider selling/ trading this lens off or returning it if thats possible

The MM version of the same lens-is possible to take the back mount off non destructively, and screw on an adapter. I have one of these that I successfully adapted to "Sony Alpha" mount and not Sigma. I read Arkku's DIY guide on Flickr : http://www.flickr.com/photos/arkku/3866934915/in/set-72157622175617760/ a few times and other places too before I attempted mine which you can see http://www.flickr.com/photos/ladenla/4201148817/in/set-72157622772624644/

A quick way of determining if yours is the AE or MM version is that the MM version aperture label has a green colored 22 and the AE does not

http://www.leitax.com/ <<These people are well known for adapting Contax Yashica Zeiss lenses to different camera mounts- it might be worth visiting their page -it might give you more insight.