MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

M39 Question
View previous topic :: View next topic  


Reply

I am trying to search for a M39 (SLR) to M42 adapter. Google through the net, I discover there are at least 3 type of M39 mount:- for enlarger, for rangefinder and for SLR camera. I already have one for the enlarger and I am not able to use it for this M39 SLR lens so I know there are not the same. The M39-M42 for enlarger looks more like a step up ring.

Does anyone know what is the actually measurement of the M39 mount SLR lens? Or, does anyone know I can find a M39-M42 adapter that can fit a M39 SLR lens?


Reply

Either the Rangefinder or SLR adapter will fit as they are the same thread. It is just a step up ring.

Enlarger lenses are also the same thread so I'm not sure what it is you have bought.


Reply

Click here to see on Ebay

I use this one with my M39 Zenit thread Jupiter-9 and Jupiter-11. Wirks fine with both Smile Also kinda works with enlarger lenses.


Reply

The batch that you have may have been a bad one. I've had some experience with a M42 adapter which was very tight with all my M42 lenses, but the extension tubes fit it fine. I think it's the Quality Control and they accuracy that they cut the threads in the adapter.


Reply

Looks like I might need to get another M39-M42 adapter and try.


Reply

martinsmith99 wrote:
Either the Rangefinder or SLR adapter will fit as they are the same thread.


Rangefinder mounts often (normally ?) have a pitch of 26 turns per inch. This is the so called Leica Thread Mount (LTM). 26 tpi is equivalent to 25.4/26 = 0.9769... mm. SLR M39 mounts have a pitch which is 1 mm. Sometimes you can mix LTM and M39 - but very often not.


Reply

sichko wrote:
martinsmith99 wrote:
Either the Rangefinder or SLR adapter will fit as they are the same thread.


Rangefinder mounts often (normally ?) have a pitch of 26 turns per inch. This is the so called Leica Thread Mount (LTM). 26 tpi is equivalent to 25.4/26 = 0.9769... mm. SLR M39 mounts have a pitch which is 1 mm. Sometimes you can mix LTM and M39 - but very often not.


Does this mean SLR M39 is 25.4 tpi?


Reply

my_photography wrote:
sichko wrote:
martinsmith99 wrote:
Either the Rangefinder or SLR adapter will fit as they are the same thread.


Rangefinder mounts often (normally ?) have a pitch of 26 turns per inch. This is the so called Leica Thread Mount (LTM). 26 tpi is equivalent to 25.4/26 = 0.9769... mm. SLR M39 mounts have a pitch which is 1 mm. Sometimes you can mix LTM and M39 - but very often not.


Does this mean SLR M39 is 25.4 tpi?


Yes.


Reply

NO - LTM is M39 x 26tpi (threads per inch)
this is the mount for Leica lenses, most enlarger lenses etc.
I don't know of any M39 x 1.0 thread, teh sloppy way to write
Leica Thread Mount (LTM is M39 (and assume the rest)


Reply

kds315* wrote:
NO - LTM is M39 x 26tpi (threads per inch)
this is the mount for Leica lenses, most enlarger lenses etc.
I don't know of any M39 x 1.0 thread, teh sloppy way to write
Leica Thread Mount (LTM is M39 (and assume the rest)


Some people have reported difficulty in mounting early FSU rangefinder lenses on a Leica. Here's an example ...

http://www.photoethnography.com/ClassicCameras/index-frameset.html?Lens-LSM.html~mainFrame

The story goes that the Soviets used a thread pitch of 1 mm rather than 26 tpi. Of course the report might be wrong but others have reported similar difficulties.

The Soviets appear to have corrected things, producing lenses which could be mounted on a Leica. However the 1 mm pitch appears to have been continued in the "M39" lenses designed for the early Zenit SLRs. So here's a page from the Zenit Archive ...

http://zenit.istra.ru/archive/lenses/mir-1.html

It's for the Mir 1. The mount is described as "M39x1". Of course the "1" might simply be a rounding of 25.4/26 as you appear to suggest. However it might be closer to unity.

My own direct experience is limited. However I did once have a batch of the M39-M42 adapters desribed in an earlier post in this thread. Although they fitted a Mir 1 (silver, M39x1) none of them would fit a rangefinder version of the Jupiter 9. This might have been due to manufcaturing tolerances. However it's also consistent with the rings having a pitch of 1 mm and the lens having a LTM pitch of 26 tpi ~ 0.977 mm.