MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Pentax K to M42. I lost the spring!!
View previous topic :: View next topic  


Reply

Hello. I have lost the "spring" of my non original M42 to K mount adapter. Now the adapter keeps on rotation in the mount, without fixing. I think it could be easy to make another one from spring steel, but I would need the shape and dimension. Could anybody be so kind to post some image of the thing, ideally at 1:1 scale, so I can make a copy of it?.Thanks in advance.

Javier


Reply

From reading various blogs relating to non original M42 adaptors I understand it is generally recommended that you remove the spring. A number of instances of panic when the camera body and adaptor could not be separated.
Try tightening the lens a little more. Should not be a problem then with lens unscrewing.
bb2


Reply

beachboy2 wrote:

Try tightening the lens a little more. Should not be a problem then with lens unscrewing.
bb2


Thank you for your answer. The problem is the adapter must be fixed in a certain position to ensure that the aperture-following level in the body is pushed to the proper "wide-open" position. If you are not going to use the camera meter, this could be O.K though. If you tight the adapter a little more, the meter becomes useless. In my case I have tried to make a new spring, but I can not remember the exact shape. There is "something" in the spring that prevents the adapter to rotate CW past the position, which I have missed. That is why I wanted to "see" one. I have never had any problem to mount or dismount the adapter.

Javier