MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Zenit E - focusing and/or mirror problem
View previous topic :: View next topic  


Reply

Hello,

I encountered a problem with my old Zenit E. It doesn't focus correctly. I made some tests with it and compered the test with the results from my good M42 camera (Porst Reflex TL, which fosuses correctly).
The test's result says that the Zenit backfocuses about ~2-3cm (instead of 0.33m it focuses at 0.36mm - I made the tests with a Pentacon 1.8/50 lens and used the writings on the barrell). Now, I know, the Zenit has a little screw under the mirror. So, I had to screw it down until I obtain the same focusing distance as the Porst and the scale on the lens.
So I did it, and now it focuses correctly. But here starts another problem. When I fire the mirror doesn't move. The shutter works correctly but the camera doen't have the ability to lift up the mirror. Only if I unscrew that screw (at the same old position) on which the mirror sits when its down, the camera can lift the mirror, but in this case I can not focus well.
Anything else is working correctly.
What can I do (except to buy another body Smile ) ?
Thank you all.

Cosmin.