| View previous topic :: View next topic |
| Author |
Message |
Seele
 Joined: 17 Apr 2009 Posts: 746 Location: Sydney Australia
|
 Posted: Tue Dec 29, 2009 2:27 pm Post subject: P6 back leatherette: which glue? |
|
 Posted: Tue Dec 29, 2009 2:27 pm Post subject: P6 back leatherette: which glue? |
|
|
Seele wrote:
When the back covering of my Pentacon six TL came off, I cleaned off the residual glue and put it back using a generic contact adhesive I got from my local news agent, which worked well on other cameras, but after a couple of months, it came off again, all four edges were lifting away.
The tricky thing about the P6 back is that it is not flat, but has a large raised portion in the middle in a "H' shape, both for giving interior space for the pressure plate, and adding stiffness to the back itself. In other words the leatherette has to stretch at certain places to conform to the double-curved contour, which might explain the glue not being able to hold it down at the edges. On other cameras where the leatherette pieces are lying flat, or just with a single curve, then there's no problem whatsoever. The leatherette, however, has been stretched in the right shape a bit so I am not starting from scratch.
So it seems I need a contact adhesive which has a stronger grip than most for this particular camera; I would like to hear from those who have been successful in doing that. I think I can get a tin of Henkel's Pattex, which is probably quite universal for the purpose, but is it strong enough? |
|
| Back to top |
|
 |
cooltouch
 Joined: 15 Jan 2009 Posts: 9096 Location: Houston, Texas
|
 Posted: Tue Dec 29, 2009 2:39 pm Post subject: |
|
 Posted: Tue Dec 29, 2009 2:39 pm Post subject: |
|
|
cooltouch wrote:
I've had good luck with either Elmer's brand or DAP brand contact adhesive for reattaching leatherettes, generally available at US hardware stores. I've even used it as the adhesive for attaching a new motorcycle seat vinyl to the metal seat pan, and it worked great for that.
However, the old-school preference is an adhesive called Pliobond. I took a camera repair class years ago, and the guy who taught it, who was a camera repair tech from way back, said that Pliobond was the correct adhesive for reattaching leatherettes. I can find it at a well-stocked hardware store over here. Hopefully you will have similar luck Down Under. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| Back to top |
|
 |
bob955i
 Joined: 15 Apr 2007 Posts: 2495
|
 Posted: Tue Dec 29, 2009 3:25 pm Post subject: |
|
 Posted: Tue Dec 29, 2009 3:25 pm Post subject: |
|
|
bob955i wrote:
PVA wood glue.
Cheap, easy to find and easy to work with.
Make sure the camera back and the leatherette panel are both nice and clean with no bumps etc. then apply a thin layer of PVA to the camera back only and reapply the leatherette.
Push it down firmly all over to make sure it's completely flat, paying special attention to the edges - it's best if the adhesive exudes here as it means the edges are more likely to be properly stuck down.
Make sure the leatherette is positioned correctly and wipe off any excess glue with a damp cloth.
You can also fine tune the leatherette positioning for about a minute or so before the adhesive starts to get tacky.
That's it. |
|
| Back to top |
|
 |
Seele
 Joined: 17 Apr 2009 Posts: 746 Location: Sydney Australia
|
 Posted: Tue Dec 29, 2009 3:49 pm Post subject: |
|
 Posted: Tue Dec 29, 2009 3:49 pm Post subject: |
|
|
Seele wrote:
Gentlemen,
Thank you for offering your thoughts, much appreciated!
Michael:
I am aware of Pliobond; there seems to be some confusion as instanced by these two threads on another forum:
http://www.kyphoto.com/classics/forum/messages/3/16479.html?1256680017
http://www.kyphoto.com/classics/forum/messages/3/7447.html?1257639073
Since the leatherette covering is just stuck to the back and does not need removal for subsequent servicing, something that can hold it down properly would be good, without having to worry about removing it. I will also try to see if the other suggestions in the second thread can be sourced locally.
Bob,
Another of my pursuits is bookbinding so I use PVA a lot; in fact I use PVA especially make for bookbinding which is pH neutral. However, PVA is water-based and reversible, I do not know how well it holds on a satin chrome surface, especially when it needs to hold extremely well at all four edges. The leatherette is a plastic membrane coated on fabrics so it would not allow moisture - no matter how little - to escape from underneath.
Thank you again! |
|
| Back to top |
|
 |
bob955i
 Joined: 15 Apr 2007 Posts: 2495
|
 Posted: Tue Dec 29, 2009 4:05 pm Post subject: |
|
 Posted: Tue Dec 29, 2009 4:05 pm Post subject: |
|
|
bob955i wrote:
Seele,
I've used PVA myself to restick leatherette to satin chrome and never had any edge lift afterwards. Used it to reattach the leatherette to a couple of P6 and Exakta prisms over a year ago and everything's still stuck down nicely.
Why not try it anyway - if it works, great, but if not, just go for the Pliobond. |
|
| Back to top |
|
 |
rawhead
 Joined: 09 Feb 2009 Posts: 1525 Location: Boston, MA
Expire: 2014-04-29
|
 Posted: Tue Dec 29, 2009 4:20 pm Post subject: |
|
 Posted: Tue Dec 29, 2009 4:20 pm Post subject: |
|
|
rawhead wrote:
I recently purchased some Pliobond from Micro-tools (they have some coold camera repair supplies, too) to work on some Hasselblad leatherettes. I haven't received it yet, but I'll get back to you once I do  _________________ Sony α7R, Pentax 67II, Kiev-60, Hasselblad 203FE, 903SWC, Graflex Norita 66, Mamiya M645 1000s, Burke & James 8x10, Graflex Pacemaker Speed Graphic (4x5 and 3x4), Century Graphic (2x3), R.B. Graflex Seried D, Rolleiflex SL66E, Rolleiflex 2.8C Xenotar, Mamiya C330f, a few M42, six P6, three OM, four Hasselblad, two Pentax 67, two Mamiya 645, one Noritar, and a sprinkle of EF. Oh, and an Aero Ektar and Leica Noctilux |
|
| Back to top |
|
 |
mo
 Joined: 27 Aug 2009 Posts: 8979 Location: Australia
Expire: 2016-07-30
|
 Posted: Wed Dec 30, 2009 3:34 am Post subject: |
|
 Posted: Wed Dec 30, 2009 3:34 am Post subject: |
|
|
mo wrote:
My repair man gave me some double sided tape as the leatherette lifted from the edge near the hinge,it worked very well. _________________ Moira, Moderator
Fuji XE-1,Pentax K-01,Panasonic G1,Panasonic G5,Pentax MX
Ricoh Singlex TLS,KR-5,KR-5Super,XR-10
Lenses
Auto Rikenon's 55/1.4, 1.8, 2.8... 50/1.7 Takumar 2/58 Preset Takumar 2.8/105 Auto Takumar 2.2/55, 3.5/35 Super Takumar 1.8/55...Macro Takumar F4/50... CZJ Biotar ALU M42 2/58 CZJ Tessar ALU M42 2.8/50
CZJ DDR Flektogon Zebra M42 2.8/35 CZJ Pancolar M42 2/50 CZJ Pancolar Exakta 2/50
Auto Mamiya/Sekor 1.8/55 ...Auto Mamiya/Sekor 2/50 Auto Mamiya/Sekor 2.8/50 Auto Mamiya/Sekor 200/3.5 Tamron SP500/8 Tamron SP350/5.6 Tamron SP90/2.5
Primoplan 1.9/58 Primagon 4.5/35 Telemegor 5.5/150 Angenieux 3.5/28 Angenieux 3,5/135 Y 2
Canon FL 58/1.2,Canon FL85/1.8,Canon FL 100/3.5,Canon SSC 2.8/100 ,Konica AR 100/2.8, Nikkor P 105/2.5
|
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|