MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Anyone used Nicna brand Nikon-EOS adapters?
View previous topic :: View next topic  


Reply

I am looking for a Nikon to Canon adapter without the usual spring-loaded cut-out thing (it makes longer lenses wobble when mounted on the camera). I found this one: Click here to see on Ebay

Anyone has experience with this type or particular brand of adapters?


Reply

this is just a China adapter sold under a different brand.

I can also get this adapter, this is one of the cheapest Nikon to EOS adapters.


Reply

hk300 wrote:
this is just a China adapter sold under a different brand.

I can also get this adapter, this is one of the cheapest Nikon to EOS adapters.


Are you sure you have the particular type in mind? The one without the stopper-spring?

Here's what I'm looking for:



And here's the widely popular one with the stopper-spring (the part on the right):



If you have the first type, can you email me a picture and the price please?


Reply

OK, so I pulled the trigger and ordered this Nicna adapter. It's $25 with an AF chip, so I didn't have much to lose.

Received the adapter today. My initial impressions are highly positive compared to the more typical adapters (see my second image). The Nicna ring sits tight on the lens and on the camera body (it does not wobble like the lock-spring type adapters). It has a very thick border which makes it easy to put on and remove from the lens (I cut my fingers more than once removing the lock-spring type adapters). Ergonomically, it is rather easy to remove with the spring-loaded locking lever.

Just like my other Nikon-Canon adapters, this one is slightly too thin, allowing the lenses to focus past infinity. I am yet to see an inexpensive Nikon adapter of proper thickness. This is a minor issue with telephotos, but annoying with wideangles.

The AF chip used is an older-generation chip with no adjustment possible (EXIF is fixed to 50mm/1.8 ). It's attached to the adapter in a typical cheap Chinese manner with lots of epoxy (the proper way would be using a plastic flange and very little glue). The AF chip is positioned about 0.3mm too high, which is not a problem, but will cause the chip contacts to wear faster if mounted/unmounted frequently.

Overall, this adapter ring is of a better quality than the cheaper options except for their choice of the AF chip. I've ordered a few more of those to put on my other near-normal lenses.