 Posted: Thu Dec 24, 2009 3:13 am Post subject: |
|
 Posted: Thu Dec 24, 2009 3:13 am Post subject: |
|
|
aoleg wrote:
OK, so I pulled the trigger and ordered this Nicna adapter. It's $25 with an AF chip, so I didn't have much to lose.
Received the adapter today. My initial impressions are highly positive compared to the more typical adapters (see my second image). The Nicna ring sits tight on the lens and on the camera body (it does not wobble like the lock-spring type adapters). It has a very thick border which makes it easy to put on and remove from the lens (I cut my fingers more than once removing the lock-spring type adapters). Ergonomically, it is rather easy to remove with the spring-loaded locking lever.
Just like my other Nikon-Canon adapters, this one is slightly too thin, allowing the lenses to focus past infinity. I am yet to see an inexpensive Nikon adapter of proper thickness. This is a minor issue with telephotos, but annoying with wideangles.
The AF chip used is an older-generation chip with no adjustment possible (EXIF is fixed to 50mm/1.8 ). It's attached to the adapter in a typical cheap Chinese manner with lots of epoxy (the proper way would be using a plastic flange and very little glue). The AF chip is positioned about 0.3mm too high, which is not a problem, but will cause the chip contacts to wear faster if mounted/unmounted frequently.
Overall, this adapter ring is of a better quality than the cheaper options except for their choice of the AF chip. I've ordered a few more of those to put on my other near-normal lenses. _________________ List of lenses |