MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Olympus 35RC .. help?
View previous topic :: View next topic  


Reply

My wonderful Oly 35RC doesn transport the film any more.
You can turn the lever and the roll that is supposed to take the film winds, but as soon as there is little resistance, a film is enough, it it stopped and doesn't turn. Any ideas what I can do?


Reply

Most often there is only some gummed up grease and dust inside the works which blocks some ratchet or spring. But be warned, the 35RC is not entirely easy to self-service, being very crowded. At current market value having it serviced isn't really worth while either (you'll pay three to five times the price of a good camera for a full tear-down and rebuild CLA), so you might at least try to clean the more easily accessible parts of the transport and cocking/shutter coupling and see whether that fixes it.


Reply

Thanks, but it's not that the ratched is blocked or something, the roll that takes the film is too loose. It slipps.


Reply

The wind-on spool should always slip to compensate for the variable diameter - the sprockets do the actual transport work. That is, your sprocket wheel does not engage any more and stays stuck in rewind mode. Try to move it backward and forward - and if that does not help, remove the bottom plate and look whether dirt or decomposed seals jam the rewind knob.


Reply

Thanks, Sevo. I'll try that!


Reply

Shocked Question

I have no idea why, but when I just tried it again now, it worked! Shocked
I did not do anything!

Well, I better not ask, rather shoot a film to see...

Thanks, again.