MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Attila told me to do it...
View previous topic :: View next topic  


Reply

..get some slide film that is! So I popped round to see my Grandad to discuss (he certainly knows his stuff). Anyway, to cut a long story short, he flogged all his M42 stuff a while back (in fact it transpires Attila purchased his Spotmatic + Super Taks 50/1.8 and 85/1.8 last year, small world! Laughing ), but had some slide film left in the fridge:



I took home 3 x rolls of Velvia 100 (36 exposures), 3 x rolls of Velvia 50 (36 exposures) and a random roll of Ilford XP2 Super B&W 400 (24 exposures). So now I have no excuse Laughing

The stuff is dated 2006 but has been refrigerated the whole time, so hopefully no issues there Smile I think I'll put a roll through my beloved Praktica BX20 first, followed by the Spotty 500 and possibly the Olympus trip Smile


Reply

I think you'll really like the Velvia. It's special stuff. 2006 expiry isn't too bad, especially since the film has been refrigerated. Plus, after you digitize the slides, if there is any color shift, it's easy enough to correct in PP.


Reply

How cool!!! I look forward your shoots!


Reply

Thanks guys, should be fun! I just remembered, provided the roll of cheap Fuji film in the Canon AE-1 comes out OK, I'll probably put a roll of Velvia through that too as FD glass is pretty cheap.

I took home another slide duplicator as well, so I'll have a go at the lens / extension tube thing as well Cool


Reply

Shrek wrote:
Thanks guys, should be fun! I just remembered, provided the roll of cheap Fuji film in the Canon AE-1 comes out OK, I'll probably put a roll of Velvia through that too as FD glass is pretty cheap.


I began my 35mm SLR experience with the Canon AE-1, and first began shooting slides with it too. One thing about the AE-1 (and A-series in general) that I found out about the hard way was that, with its not-very-strongly center-weighted metering pattern, it was very easy to underexpose slides. Be very watchful of any bright or reflective light sources within the frame because it will expose for those. You'll have best results taking ambient readings and set the camera to manual based on those.


Reply

Very useful tip, thanks Michael.


Reply

It's the downhill slope for you!

I've found that I shoot mainly B&W film now. The digi hardly ever comes out to play.

Can your local store develop the B&W film? I had issues getting it developed so now I do my own.


Reply

cooltouch wrote:
One thing about the AE-1 (and A-series in general) that I found out about the hard way was that, with its not-very-strongly center-weighted metering pattern, it was very easy to underexpose slides.Be very watchful of any bright or reflective light sources within the frame because it will expose for those Be very watchful of any bright or reflective light sources within the frame because it will expose for those. You'll have best results taking ambient readings and set the camera to manual based on those.
I can confirm that. I had my share of shots ruined that way.
Train your eyes to recognize quickly tricky lighting conditions and follow Michael's advice about metering. You'll save yourself a lot of frustration Wink .
martinsmith99 wrote:
Can your local store develop the B&W film?
He should have no problem: XP2 is a chromogenic film, it has to be developed in C-41 chemistry that is, so any minilab can do it .
Cheers, Marty.


Reply

@ Cooltouch
Could you expand on what "ambient readings" mean?
Thanks


Reply

Mo-Fo wrote:
@ Cooltouch
Could you expand on what "ambient readings" mean?
Thanks


Well, perhaps my choice of words wasn't the best. Especially since the word "ambient" is more closely associated with temperature, for example. But what I meant by "ambient" in this case was 'available light', or the light that is illuminating the scene. "Incident" would probably have been a better word, since it is more commonly used with camera meters.

But most cameras do not have an incident light measurement capability. They measure the scene illuminated by this light, and also any light sources within the scene. It is the latter I am most cautious about with a camera like the AE-1.

So, what does one do? Well, keeping in mind that all meters measure a scene as 18% gray (at least in theory), then one need only look for something in the scene that's 18% gray. The blue sky away from the sun is 18% gray. Green grass is 18% gray. You can meter the palm of your hand and open up a stop for 18% gray.

Or you can use an incident light meter, which measures the light illuminating the scene.


Reply

Thanks....You know what I struggle with the most with learning about the gray scale is trusting the methods used....setting the camera from the grass or sky or even the back of the hand then aiming the camera back at the actual image you want to take.The fact of I see in colour but the camera sees shades of gray is for me just a whole new learning curve.


Reply

Welp, one way to gain trust is to use these methods and see for yourself. And then, when you find out they work, then you will come to rely on them. I've used these ways of estimating exposure for some 25 years, so I know I can rely on them.

And it's not so much that the camera sees in shades of gray as it is the camera sees in a continuum of light intensity. The light intensity that corresponds to 18% gray is that which the typical camera meter is programmed to see as "normal."


Reply

Very Happy I will trust....trial and error as I learn my cameras and the lenses...and the light...it is really harsh in Australia....


Reply

Mo-Fo wrote:
Very Happy I will trust....trial and error as I learn my cameras and the lenses...and the light...it is really harsh in Australia....


Can't be too much harsher than Texas Cool

I was looking on our globe the other day, wanting to see if Houston, Texas shares its latitude with any other well known city, and it does: Cairo, Egypt. Kinda puts things into perspective.

Seriously though, I've lived in and photographed in some harsh climes, and even when using slide film with its notoriously narrow EV range, I have been able to get good, well-exposed photos. I think the key to getting a good photo in difficultly lit situations is to decide on the most important aspect of the scene, and expose for it. Then let the highlights and/or shadows fall where they may. And to steer things back to my original point, which had already moved somewhat tangentially from the original topic, it was this particular aspect of photography that led to some exposure problems before I realized that I had to be cautious with the way the A-series Canons meter a scene. Specifically, the A-series are very sensitive to any bright light sources or reflections that may occur anywhere within the viewfinder frame, and will adjust their exposure readouts accordingly. So it's best that if this is the situation to use an alternative method for determining exposure.