MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Trigger voltages
View previous topic :: View next topic  


Reply

Finally got my Lester A Dine Ring Light working (had to leave it on for a few hours to reform the capacitor). I'd like to use it on my DSLR as well as my film cameras, but I need to know it's trigger voltage. I don't have a multimeter to test it my self & was hoping to save on the cost of a Wein Safe Sync....Anyone have one & a multimeter as well?


Reply

Screamin Scott wrote:
Finally got my Lester A Dine Ring Light working (had to leave it on for a few hours to reform the capacitor). I'd like to use it on my DSLR as well as my film cameras, but I need to know it's trigger voltage. I don't have a multimeter to test it my self & was hoping to save on the cost of a Wein Safe Sync....Anyone have one & a multimeter as well?


Well it isn't listed here: http://www.botzilla.com/photo/strobeVolts.html

If no one responds, Radio Shack has $10 digital multi-meters; more over at mpja.com, here's one for $6: http://www.mpja.com/prodinfo.asp?number=17191+TE


Reply

A word of warning....

The Nikon D70s is rumored to handle 250volts. However a friend fried his using a Metz 45 CL4 on it. Its trigger voltage is only 16v.


Reply

Hi,

i cant say something about the Nikons in terms of highvoltage triggering.

I can speak myself only for Canon DSLR, 350D, 400D, 5D and 5D MKII.

On my Crop Cams 350+400D there was no problem to use highvoltage trigger circuits in the hot shoe. The only thing you have to bear in mind, not to touch the communication pins, which are managing the protocol transfer between Flashlight and Cam. So i decided to isolate the four pins for that communication with tape. I worked in this way nearly 3 Years, without having any problem.

The 5Ds do hae a PC Flash sync contact, so there is no problem with high voltage..

But as i stated, i dont know how the Nikons work.

So the best way should be, to use a radio flash transmitter/receiver like the PT04 (the cheap ones) or better. Cost about 30-35 Euro and there would no danger in this case.

But if Nikon can handle the 250V.. it could act in the same way

Cheers
Henry