MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

what to use to keep the 'grip rubber' firm on the focus ring
View previous topic :: View next topic  


Reply

Hi,

What would/should one use to keep the 'grip rubber' material on the focus ring? I got another new 'old' lens and the grip material ring is loose:-).

My current plan is to use the typical glue for arts and craft. Pointers and suggestions are appreciated.

Cheers,


Reply

A little bit of contact cement will work. Don't overdo it though -- a little bit of that stuff goes a long way.

Contact cement is nice because it remains pliable. I use it for re-attaching camera body leatherettes after removing them for repairs.


Reply

cooltouch wrote:
A little bit of contact cement will work. Don't overdo it though -- a little bit of that stuff goes a long way.

Contact cement is nice because it remains pliable. I use it for re-attaching camera body leatherettes after removing them for repairs.


thanks


Reply

You could try hair spray, I have used it to re fix the grip on an EOS (if I am allowed to say that word here) 17-35mm . Spray a little into the cap (spray can's cap not lens cap) and lightly coat the inside of the lens grip, the grip is not instant so allows a little time for adjustments to be made, hold for a few minutes until it has set. It is not a permanent bond and can be carefully peeled off should you need to dismantle the lens. We used to use hair spray to fix handle bar grips on bikes, I have used it on the plastic barrel of my lens but do a discrete test to make sure you will not cause any permanent damage to your lenses.


Reply

Welcome Keith!


Reply

zx9 wrote:
You could try hair spray, I have used it to re fix the grip on an EOS (if I am allowed to say that word here) 17-35mm . Spray a little into the cap (spray can's cap not lens cap) and lightly coat the inside of the lens grip, the grip is not instant so allows a little time for adjustments to be made, hold for a few minutes until it has set. It is not a permanent bond and can be carefully peeled off should you need to dismantle the lens. We used to use hair spray to fix handle bar grips on bikes, I have used it on the plastic barrel of my lens but do a discrete test to make sure you will not cause any permanent damage to your lenses.
'

Keith, thank you for your suggestion. It is a very interesting solution. However, I would give the contact cement a try first. Believe or not, my family do not use hair spray at all, so it will be somewhat funny/waste to get a full can just to fix one lens:-). On the other hand, I have a few items that are loose around the house where I can use contact cement for - so I can kill a number of birds with just one tube of the stuff.

Cheers,


Reply

I use double sided carpet tape.. some doubles sided tapes don't adhere as the pasticisers in the rubber / leatherette cause a sticky goo to form..

I have a Nikon 950 where the factory glue likewise 'melted' and oozed over everything!

Carpet tape means that you can remove the cover later - many contact adhesives (like Evostik etc.) are permanent.. Pliobond from a good hardware store works well..

Doug.

cheve wrote:
zx9 wrote:
You could try hair spray, I have used it to re fix the grip on an EOS (if I am allowed to say that word here) 17-35mm . Spray a little into the cap (spray can's cap not lens cap) and lightly coat the inside of the lens grip, the grip is not instant so allows a little time for adjustments to be made, hold for a few minutes until it has set. It is not a permanent bond and can be carefully peeled off should you need to dismantle the lens. We used to use hair spray to fix handle bar grips on bikes, I have used it on the plastic barrel of my lens but do a discrete test to make sure you will not cause any permanent damage to your lenses.
'

Keith, thank you for your suggestion. It is a very interesting solution. However, I would give the contact cement a try first. Believe or not, my family do not use hair spray at all, so it will be somewhat funny/waste to get a full can just to fix one lens:-). On the other hand, I have a few items that are loose around the house where I can use contact cement for - so I can kill a number of birds with just one tube of the stuff.

Cheers,


Reply

nemesis101 wrote:
Quote:
Carpet tape means that you can remove the cover later - many contact adhesives (like Evostik etc.) are permanent.. Pliobond from a good hardware store works well..
'

Keith, thank you for your suggestion. It is a very interesting solution. However, I would give the contact cement a try first. Believe or not, my family do not use hair spray at all, so it will be somewhat funny/waste to get a full can just to fix one lens:-). On the other hand, I have a few items that are loose around the house where I can use contact cement for - so I can kill a number of birds with just one tube of the stuff.


Just to clarify my earlier comment regarding the use of contact cement, the type I use is made by either Elmers or DAP, and comes in a small bottle with an applicator in the cap. It is very similar to Pliobond in that it remains pliable. In fact, I've owned both, and I can't honestly tell the difference between the two.


Reply

@Doug: thanks for the new option.

@Michael: thanks for your followup comments. I assume the 'DAP' are brand stocked by 'Home Depot'.

Cheers


Reply

cheve wrote:
@Michael: thanks for your followup comments. I assume the 'DAP' are brand stocked by 'Home Depot'.


Yes, as a matter of fact, I just bought a bottle of DAP contact cement from my local Home Depot just a couple weeks ago.