Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!

SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

DSLR Sensor Cleaning Guide
View previous topic :: View next topic  


PostPosted: Thu Dec 17, 2009 2:04 am    Post subject: DSLR Sensor Cleaning Guide Reply with quote

I just came across this, as posted to POTN.

I have been reading through the information for some time now,
and it seems to be an excellent resource of unbiased information
about the various methods for sensor cleaning. Many comparisons
are made between different methods, costs are compared,
effectiveness & reliability, safety, etc...

So, check out
http://www.cleaningdigitalcameras.com/index.html


PostPosted: Fri Dec 18, 2009 4:59 pm    Post subject: Reply with quote

that is very nice of you to post; a very informative article, especially to someone like me who has only attempted this one time.
thanks!


PostPosted: Fri Dec 18, 2009 5:39 pm    Post subject: Reply with quote

I've cleaned sensors on my camera, my wife's camera and two friends' cameras without issues.

Remember: you aren't cleaning the sensor, you're cleaning the filter that sits on top of it.


PostPosted: Fri Dec 18, 2009 5:50 pm    Post subject: Reply with quote

i didnt realize all sensors are protected by filters--is that true of all cameras?


PostPosted: Fri Dec 18, 2009 8:06 pm    Post subject: Reply with quote

Unless they have been modified.


patrickh


PostPosted: Fri Dec 18, 2009 8:07 pm    Post subject: Reply with quote

This is the method I am using (after years of different tries with everything from microfibre to methanol ...)

http://forum.yashica.org/index.php/topic,6.msg7.html#new


PostPosted: Fri Dec 18, 2009 9:12 pm    Post subject: Reply with quote

rbelyell wrote:
i didnt realize all sensors are protected by filters--is that true of all cameras?


Yes, it's the bypass filter that you clean (just to add to Poilu's post).

Perhaps if these products were called `Bypass Filter Cleaners' people would be less afraid.


PostPosted: Fri Dec 18, 2009 10:09 pm    Post subject: Reply with quote

Cobalt60 wrote:
This is the method I am using (after years of different tries with everything from microfibre to methanol ...)

http://forum.yashica.org/index.php/topic,6.msg7.html#new


Looks best solution! Thank you!


PostPosted: Fri Dec 18, 2009 10:16 pm    Post subject: Reply with quote

I use 800 grit wet and dry on my 5D for those really stubborn sensor marks... Laughing


PostPosted: Fri Dec 18, 2009 11:12 pm    Post subject: Reply with quote

bob955i wrote:
I use 800 grit wet and dry on my 5D for those really stubborn sensor marks... Laughing

Laughing


PostPosted: Sat Dec 19, 2009 5:46 am    Post subject: Reply with quote

bob955i wrote:
I use 800 grit wet and dry on my 5D for those really stubborn sensor marks... Laughing
I hope you're using the 800-grit with water. Very Happy


PostPosted: Sat Dec 19, 2009 7:54 am    Post subject: Just wondering Reply with quote

I wonder how many people actually have damaged or destroyed their camera/sensor by using an "improper" method of cleaning?


PostPosted: Sat Dec 19, 2009 10:06 am    Post subject: Re: Just wondering Reply with quote

Anu wrote:
I wonder how many people actually have damaged or destroyed their camera/sensor by using an "improper" method of cleaning?

Probably more than will admit to it!


PostPosted: Sat Dec 19, 2009 1:05 pm    Post subject: Reply with quote

i am afraid of joining their ranks, which is why i typically shy away from doing it at all.


PostPosted: Sat Dec 19, 2009 1:23 pm    Post subject: Reply with quote

Sigma SD9, 10 and 14: I did sensor cleaning several times. Usually with a clean, with pressure air "uploaded", artist's brush with synthetic hair (24 da Vinci Junior synthetics). Works perfectly in most cases. Once or twice, I messed the sensor by bringing kind of grease or so, from the mirror chamber walls onto the sensor. Tried to clean with a sensor cleaner (made it even worse!), and finally removed everything for 100% by using the unuseable Q-tips with Methanolum (be careful, when using!!!!!).

My favourite methods.

Klaus