Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!

SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

CA - contrast - sharpness?
View previous topic :: View next topic  


PostPosted: Tue Dec 01, 2009 9:29 am    Post subject: CA - contrast - sharpness? Reply with quote

How they relate to each other?

Does anyone have some not-so-advanced-in-physics -type practical reading links about this?


PostPosted: Tue Dec 01, 2009 9:38 am    Post subject: Reply with quote

As I remember, Orio posted some nice links earlier. There was also a nice article by Zeiss about relation of subjective sharpness vs. resolution vs. contrast.

Anyway, CA isn't directly related to sharpness or contrast, but there can be indirect influence. CA can be sometimes "masked" by low contrast/saturation of old lenses or by other optical aberration, which blurs final image (together with signs of CA). Also simple diffraction (which blurs image at high f-stops) can blur-away some CA, too Smile


PostPosted: Tue Dec 01, 2009 6:48 pm    Post subject: Reply with quote

When it comes to CA and sharpness and contrast, here's what I keep in mind:

In general terms, chromatic aberration occurs with a lens when the different wavelengths of light do not have the same point of focus. Red's wavelength is longer than blue, for example, so the challenge for optical designers is to get wavelengths of varying values to meet at the same point of focus. When they don't, we see color fringing. But also when they are not meeting at the same point of focus, this necessarily means that the lens is losing both sharpness and contrast. It's losing sharpness because components of the image are not at the same focal plane as others. It's losing contrast for much the same reason.

This is one reason why lenses that use low-dispersion glass or aspherical elements or apochromatic designs are often sharper than equivalents that don't. This is also why lenses of smaller maximum apertures often provide sharper images than those of larger maximum apertures, because it's easier to design a slower optic with fewer CAs that a faster one.


PostPosted: Tue Dec 01, 2009 8:18 pm    Post subject: Reply with quote

Heres a couple of links with some info on CA.

http://www.dpreview.com/learn/?/Glossary/Optical/chromatic_aberration_01.htm

http://hyperphysics.phy-astr.gsu.edu/HBASE/geoopt/aber2.html

This is a link about lens contrast.

http://www.luminous-landscape.com/tutorials/understanding-series/lens-contrast.shtml

This is Ken Rockwells take on sharpness.

http://www.kenrockwell.com/tech/lens-sharpness.htm

Heres a link on doing a few test.

http://www.bobatkins.com/photography/technical/lens_sharpness.html


PostPosted: Wed Dec 02, 2009 2:57 am    Post subject: Reply with quote

Very good information, thanks Laughing