MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Hoya 28mm f2.8 aperture blades cleaning
View previous topic :: View next topic  


Reply

Hi all, I am new around here.
I have been watching for a few weeks this forum this is my first post Smile

I got hold of an Hoya 28mm f2.8 (Nikon F mount) with apperture blades stuck, they have oil.

Does any one have one of these? Any luck opening it?

I am going to try opening it, but I have not seen any plans of it. Embarassed

Cheers


Reply

Welcome!

Bad news is many late Japanese lens has nasty built they used for example glue to fix screw and this glued screws are un removable.


Reply

It seems to be a lens with a very good IQ. Perhaps it may be of your interest:


http://www.pbase.com/steephill/28mms


Good luck. Rino.


Reply

Shocked Glued screws?
That's a new one to me Smile

I still haven't tried opening it, but seems like that it's going to put up a fight.

@estudleon

I've seen that chart, it helped me while I was deciding to buy it.
I tried it one or two times, wide open only, the blades are stuck, and the quality seems fine.

I was not aware of the defect, got a refund though.

I'll let you know how it turns out, got to get a decent screwdriver set. Smile

Thanks


Reply

estik wrote:
Shocked Glued screws?
That's a new one to me Smile

I still haven't tried opening it, but seems like that it's going to put up a fight.

@estudleon

I've seen that chart, it helped me while I was deciding to buy it.
I tried it one or two times, wide open only, the blades are stuck, and the quality seems fine.

I was not aware of the defect, got a refund though.

I'll let you know how it turns out, got to get a decent screwdriver set. Smile

Thanks


Yes, I found in Kiron prime.


Reply

this message is outdated and deleted!

Last edited by Aykman on Mon Oct 11, 2010 6:38 pm; edited 1 time in total


Reply

Attila wrote:
estik wrote:
Shocked Glued screws?
That's a new one to me Smile

I still haven't tried opening it, but seems like that it's going to put up a fight.

@estudleon

I've seen that chart, it helped me while I was deciding to buy it.
I tried it one or two times, wide open only, the blades are stuck, and the quality seems fine.

I was not aware of the defect, got a refund though.

I'll let you know how it turns out, got to get a decent screwdriver set. Smile

Thanks


Yes, I found in Kiron prime.


surely you tried acetone Attila?