MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

smc M lens with k10d
View previous topic :: View next topic  


Reply

I have a K10D and recently got a Pentax-M 28mm lens, k-mount lens. No A- setting.

I choose the 28mm SR setting, and press the AE-L before the shutter button, but I cannot get a meter reading, whether the diaphragm is stopped down or not.

The "allow f-stop ring" is activated. The diaphragm does close down when the shutter releases. If I set the right diaphragm - f-stop settings the exposure is right.

But the camera gives me no clue as to the setting. Do I have to get a manual meter?


Reply

Don't have a K10D but a K20D. The AEL is for locking the shutter speed. The little green button is for metering. For pre A lenses use the same as for M42s and either us AV or M modes. Another trick is take a pic, look at it on the preview screen and adjust the exposure + or - to get the exposure compensation to suit the aperture setting. That might take a couple of test pics to get it to what you are happy with.
The aperture setting will not show in the view finder but will show as F--


Reply

Dichro1 wrote:
I have a K10D and recently got a Pentax-M 28mm lens, k-mount lens. No A- setting.

Congratulations ! You acquired a real nice lens !

Quote:
I choose the 28mm SR setting, and press the AE-L before the shutter button, but I cannot get a meter reading, whether the diaphragm is stopped down or not.

The AE-L button is used for that purpose on the istd series (and K100D I think). Your K10 uses the green button instead. Oh, and you must be on the "M" setting, not on "AV".


Reply

And THANKS! I have had a Camera Armor cover on my camera for many months now, and I did not remember what the green button was!

I'm Definitely getting old. When I set the aperture, and press the green button near the shutter button the camera selects the proper shutter speed.
Duh!

Now I have a 28mm-f2.8, 50mm-f1.4, 135mm that I can now use instead of blowing a few thousand on Pentax primes.


Reply

Ha ha ha

On behalf of MFL Forum may I welcome you to our exclusive 'Senior Moments' club? lol
Doug


Dichro1 wrote:
And THANKS! I have had a Camera Armor cover on my camera for many months now, and I did not remember what the green button was!

I'm Definitely getting old. When I set the aperture, and press the green button near the shutter button the camera selects the proper shutter speed.
Duh!

Now I have a 28mm-f2.8, 50mm-f1.4, 135mm that I can now use instead of blowing a few thousand on Pentax primes.


Reply

I hate forgetting to switch from Av (with the FA and Tamron) to M (for the rest)..."Why isn't this thing working?" Embarassed

With the M 28/2.8 on the camera, you'll get a lot of sideways looks in your direction from non-Pentax users Laughing


Reply

I just got an answer from Pentax. Pulling the ON/OFF switch to the right, the diaphragm will stop down and meter the scene with a k-mount M lens. This also works with the M42 thread mount lenses to get a meter reading when you have manually stopped the diaphragm down. I still will get one of my hand meters working.

The ON/OFF switch doesn't keep the picture, it dumps it when you take a picture. You use the same trick to get a picture to check the white balance of a scene. I knew about the WB check, but didn't realize it works to get a manual meter reading.