MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Carl Zeiss Pancolar 50mm F1.8 and Sigma SD14 problem
View previous topic :: View next topic  


Reply

Hello,

I recently got myself a CZJ Pancolar 50mm F1.8. Tried it today on my SD14 for the first time and was surprised to see a blurry image in the viewfinder??? Tried everything from playing with the focus ring to aperture changes...still a blurry view in the viewfinder???

Cross checked by fixing the CZJ 35mm F2.4 and the Asahi Pentax SMC Takumar 135mm F3.5 lenses...both of them working spot on...no problems.

What could be wrong with this lens? And how can i go about fixing it?

Thanks very much in advance!

Stay well.
Sendhil.


Reply

Twisted lens element, loosy optical block, lens assembled in a wrong way... Do you have black version, or zebra?


Reply

no-X wrote:
Do you have black version, or zebra?


I have the black version.

How do i go about finding whats wrong from some of the causes that you have mentioned?

Thanks for your reply!


Reply

Firstly try to focus on something very close and than to infinity. If you are unable to get sharp image in viewfinder for any distance, then try to unscrew the lens partially and try the same again. If you are unable to get sharp image even in this way, it will be some problem with optical part (not inaccuaratly assembled mechanical part).

If you have auto MC version, it's quite easy to check, if the optical blocks are tightened properly. The easiest way is to set the lens at "M" mode, switch it to f/1.8 (not necessary, but it's easy to remember), screw out the 3 rear screws and remove the rear part.

Than to screw out the 3 screws holding the optical block (they are smaller). Than you can take out the optical block - it can hold tack even if the screws are out.

The optical part consists of front optical block, aperture block and rear optical block. The two optical blocks should be screwed in the aperture block tightly. Also the optical elements should be screwed in the optical block tightly (they should not tinkle if you shake with it).

Anyway, the procedure is the same as for black flektogon, check it here:

http://www.kolumbus.fi/uusilehto/img/lenses/zeiss/disass/

You shouldn't forgot to hood the inner lever before reassembling the rear part (not difficult).

Anyway, if all optical elements are screwed in tightly and the problem persists, it's possible, that some of them is twisted.


Reply

Thanks very much no-X!!

I will try out the procedure suggested by you and post here the results.


Reply

Hello no-X,

I tried the steps outlined by you. I still get a blurry image when i fix this lens on my SD14.

An interesting thing i noted while doing all this is that, i am able to see a clear image when looking through the len directly...kind of like a fish eye lens view...and if i look through the other two lenses which are working ok with my SD14...the image is blurred.

So i guess there is some optical error...and in my quest for figuring out how to take apart this lens i came across this very useful link:

http://www.bigeye.url.tw/big5/photodiy.htm

Huge selection of pages to take apart just about any lens Smile

Thanks once again for your assistance!


Reply

Good links - thanks! Smile