MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Big problem...Tamron 90mm macro stuck to adaptall-2 mount.
View previous topic :: View next topic  


Reply

Hi there everyone.

'Tis a sad day for me. I think this is a lost cause, but I'll try anyway. I have a feeling that this 90mm f/2.5 macro is going in the trash.

I use an SD14 camera and to mount this adaptall-2 lens, I use an adaptall-2 to M42 adapter, then mount that to an M42 to Sigma SD adapter. It sounds complicated, but it's a snap...or so I thought.

I shot with it today and it was magnificent, but I noticed the viewfinder was awfully bright at, say, f/16. Wouldn't you know it, that's because the lens only stopped down from f/2.5 to f/5.6. The aperture pin wasn't being depressed all the way. So, since I didn't have any glue, I figured I'd jam it down all the way and bend it a tad, so it just stuck at the fully-depressed position. That worked, for the most part, until I realized that it would no longer open up fully to f/2.5 (have your cake and eat it too, anyone?). Great, well, I'll pull the adapter off and think of something else. Nope, no way.

Since the pin was depressed all the way and then bent a tad, it has zero play or give in it. This means that now when I try to unscrew the adaptall-2 adapter, it unscrews about a quarter of the way and then just jammed. I tried with more force than I knew I had to no avail at all. At this point, I'm pretty much screwed. I really have no idea what to do.

The ONLY thing I can think of, is to get a drill and a tiny, tiny drill bit to drill out that aperture pin. I don't care if I destroy the adapter. Hell, I'll throw it off my roof if it ever comes off anyhow. But there is no way on earth it is unscrewing from the lens. So I'm stuck with a lens that goes from about f/4 to f/8. I'm not going to use it like this; it's not worth it.

Does anyone have ANY ideas for me? I know this is a nightmare of a post to follow, but I am begging anyone for help. I'd even pay someone to disassemble it and try to remove it, but I see no way to do anything of that nature. As of now, I'm going to bed knowing that I destroyed the best lens I've ever owned...

Thanks for reading. Any replies greatly welcomed with open arms.

-Collin-


Reply

I think there are screws on top of the Adaptall ... Take a look here : http://forum.mflenses.com/fixing-an-adaptall-to-m42-adapter-t6196,highlight,adaptall.html

!!!!!DON'T THROW AWAY THE TAMMY !!!!!!! Laughing


Reply

Hi Collin2424,

Don't despair, it's nothing that money can't fix ... or so my grandad used to say.

Reading your post, it seems you can't get the SD14/M42 adapter to unscrew from the Tamron Adaptall mount - is that so? If it is, then maybe things aren't so bad after all as you SHOULD still be able to remove the Adaptall mount from the lens itself. Even if it seems to be locked on the "AE" position it should still disnegage with a bit of gentle wiggling. The Tamron mounts are supposed to mounted and removed with the aperture ring at its wide-open setting, but they'll come off irrrespective of wherever it is. Then, at the worst, you'd need look for another pair of mounts.

I hope I've understood the problem correctly, if not I can only apologise for not doing so. And remember that good repairers can work wonders.


Reply

Jieffe wrote:
I think there are screws on top of the Adaptall ... Take a look here : http://forum.mflenses.com/fixing-an-adaptall-to-m42-adapter-t6196,highlight,adaptall.html

!!!!!DON'T THROW AWAY THE TAMMY !!!!!!! Laughing


No, No, it's ok, you CAN throw it away - Shocked I'll even send you a suitably addressed box to use Very Happy Very Happy Very Happy


Reply

No no no, send it to me, I'll make sure it gets thrown away for you. Very Happy


Reply

I wonder - is it possible you can work things loose bit by bit by also turning the aperture ring to various settings while attempting to loosen the mount? Also, the 'ears' on the mount that fit into slots on the lens (or was it the other way around) - one is to record the max aperture, the other to record the current aperture - tweaking these might loosen something as well. Depending on the adaptall, these may not be present.

Finally do as Jieffe suggests - unscrew any screws on the mount!


Reply

Hi Collin,

Faceitousness aside (hey, you could consider throwing it in my direction too !)

Take some pictures of the backside of that lens and we could probably give better advice.

The Adaptall mount itself can be dismantled, with some effort. You can certainly try to drill out the pin hole with a Dremel if that becomes necessary. The M42 Adaptall is a lousy mount in any case, there is no provision for M-A settings and the thing can't be modified to set it with the pin or the underlying mechanism to stop down by default as it does in fact interfere with removing the mount. I learned this the hard way, I got a bit of balsa stuck in there to make it manual, and guess what, stuck mount.


Reply

luisalegria, greetings from the Bay Area my friend!

Okay, so I got the mount off last night at 3:30 am. Here I am at work, barely able to open my eyes. I was on a mission, and I was able to gouge out the adapter with a pocket knife. It took me literally hours, but the lens is still perfect and the adapter has been removed. Whew, that was just flat out painful.

So, it's time to look for a new adapter. I'm tempted to get a PK adapter instead, since the Sigma mount is the same. I don't think I want to do another M42 adapter because ti just doesn't work well. The stupid thing is never going to close down all the way. I have an old Minolta MD adapter and I mounted it to that....it stops down perfectly. I just don't get it! The lens operates smoothly, but I definitely agree that the Adaptall-2 to M42 mount is just plain garbage. Sad

I'm still scratching my head for a solution. I WILL use this lens!

Thanks for the help. I really, really appreciate it. Great forums you guys have here.

-Collin-


Reply

Collin, I'm glad you got the thing off without damage to the lens.

In Tamron's defense, after all they wanted you to buy an Adaptall for every mount, rather than make them adapter ready. The market of preset screw mount camera bodies was/is pretty slim. So, by their logic, you have a screw mount camera, you buy a screw mount Adaptall. You have a K mount cam too? Well, buy a K mount Adaptall...


Reply

luisalegria: sent you an email.

I understand how Tamron intended the Adaptall's to work. What I can't understand, however, is why Tamron made it so when the aperture pin is fully depressed, you cannot remove the lens from the adapter. That's the issue I'm going to repeatedly run into, I feel, no matter which mount I use. Sad

-Collin-


Reply

collin2424 wrote:
I understand how Tamron intended the Adaptall's to work. What I can't understand, however, is why Tamron made it so when the aperture pin is fully depressed, you cannot remove the lens from the adapter. That's the issue I'm going to repeatedly run into, I feel, no matter which mount I use. Sad

Well, not really. The flaw in the M42 adaptall mount is the absence of a A/M switch. After all, when Tamron designed that adapter, nobody knew it will be used decades later adapted on digital cameras ...

Using an Adaptall Pentax-K mount with the lever removed will not allow you to close the aperture (I just tried, the lens stays wide open).

A solution would be to buy an Ebay compatible Adaptall PK adapter like this one Click here to see on Ebay which closes the aperture. I have one but not near me. I could only check this weekend on the Tamron 90mm. But I know for sure it works for the 28mm.


Reply

Jieffe,

Thank you. You saved me a big head ache on that one.

I see those Chinese-made adapters all over eBay, but can you please explain why that one closes the aperture and the PK one doesn't? I don't understand the difference, but I do notice the difference visually in that the eBay one has no mechanics. Are you certain it holds the pin to close the aperture, thus enabling "stop down" metering?

If it works on the 28mm, I'd assume it works on the 90mm.

Thanks again,

-Collin-


Reply

Don't get that ebay one - the outer flange makes it impossible to get infinity.

Get this one instead:
http://forum.mflenses.com/m42-to-pk-adapter-with-inner-flange-for-auto-pin-lens-t16382.html

Mine is still in the mail, I'm hoping to get it soon & post my experience.


Reply

Hi Nesster,

Jieffe's adapter is for Tamron Adaptall->PK, which is what is required here. It does not have a flange problem because the spacing is calculated for the native Adaptall lens bayonet, which is > PK or M42.

I was going to get one of these also to get AV operation with Tamron Adaptalls on a Pentax DSLR.

I also got a couple of those M42->PK adapters from Alex


Reply

Hmm.

I just tried my Adaptall-2 PK adapters unmounted. I never bothered before as I have PK cameras. It seems that unmounted they default to closed-aperture, so that if you mount them on a non-PK camera they will work as "manual".

So Collin, if you want to try one of these on a Sigma, assuming there isn't anything that will interfere with the insides of the Sigma mount, you should be able to use your Tamron lens with a PK Adaptall in manual mode with all apertures.


Reply

luisalegria, you've been of utmost help. In default form, unmounted, PK lenses are set to stop down metering. That's why I was confused to hear that you said they'd be stuck wide open.

I will be cutting off the aperture lever and the plastic guard to prevent it from hitting the internals of a Sigma camera, so certainly there won't be anything to move that lever. So just a last confirmation...when unmounted to a camera body and nothing interfering with that lever, the lens stops down manually by default? If so, I'll order away.

Thanks a TON my friend.

-Collin-


Reply

luisalegria wrote:
So Collin, if you want to try one of these on a Sigma, assuming there isn't anything that will interfere with the insides of the Sigma mount, you should be able to use your Tamron lens with a PK Adaptall in manual mode with all apertures.

Correct, as long as he cuts the lever which, I think, will interfere. The Adaptall I modded a few years ago (to fit my 500mm mirror on a Sigma SA1) had the lever assembly completely removed, not just cut flush with the mount ... hence the full aperture problem I described in my previous post.

So, Collins's options are :
- buy a genuine Adaptall PK and cut the lever or
- buy the chinese copy.

(BTW, Luis, I confirm that my chinese copy mounts and works fine in AV on both the istds2 and the K200.)

I don't have access to a Sigma DSLR, otherwise I would have checked both solutions ...


Reply

Jieffe wrote:
luisalegria wrote:
So Collin, if you want to try one of these on a Sigma, assuming there isn't anything that will interfere with the insides of the Sigma mount, you should be able to use your Tamron lens with a PK Adaptall in manual mode with all apertures.

Correct, as long as he cuts the lever which, I think, will interfere. The Adaptall I modded a few years ago (to fit my 500mm mirror on a Sigma SA1) had the lever assembly completely removed, not just cut flush with the mount ... hence the full aperture problem I described in my previous post.

So, Collins's options are :
- buy a genuine Adaptall PK and cut the lever or
- buy the chinese copy.

(BTW, Luis, I confirm that my chinese copy mounts and works fine in AV on both the istds2 and the K200.)

I don't have access to a Sigma DSLR, otherwise I would have checked both solutions ...


Thank you, that's what I needed to know! I'll just order it from B&H; they have one for $29 and some change. Sounds like the best solution.

I WILL make this work. Smile I really hope it isn't another situation like the piece of junk M42 adapter.

-Collin-


Reply

collin2424 wrote:
I WILL make this work

You MUST make this work ! The Tammy 90mm is a first-class lens, it would be a shame not to use it.


Reply

Well, got the PK Adaptall adapter today. It fits the camera just fine, just like it was made for it. I cut off the aperture lever, of course.

Still stuck at f/2.5-8. It's usable for a portrait lens, but I've given up hope as a serious macro lens. There just isn't enough depth of field for that. It's very strange, though. If I take the lens off with the adapter still mounted and I set it for f/32, it will stop down to around f/8 or so and then when I open the aperture lever and let it snap closed, it will close all the way to f/32. No, the blades aren't sticky, it's just the mechanism in the Tamron. I can't really explain it any better than that. Basically, if I take the lens off, set it to f/32 and then mount it, I can travel through all apertures as long as I start with f/32. But then, when I start stopping back down, it stops at f/8 again. Very, very frustrating. My two other adaptall-2 lenses exhibit no such behavior.

I guess I'm out of ideas. Darn.

-Collin-


Reply

I am thinking of something else.

Remove the Adaptall on the 90mm and one of the other Tamron.

Compare the back of both lenses, especially the lever shown here :



Are they identical ? Isn't the 90mm missing a part of it ?


Reply

Jieffe,

Not quite sure where you're going with this, but here's the aperture lever of the 90mm.



-Collin-


Reply

Nope, from what I can see, seems to be fine.

I once answered on another forum a question about a Tamron having aperture problems. It came from that lever missing a part (the little roundel on the left in my picture).

If you are pushing it with your finger, does the aperture close fully or are you too limited to f8 ?


Reply

Is there any play in the aperture linkage? Or does it move at an angle?

I'm wondering if the adapter isnt depressing it far enough for some reason? Wear in the linkage or something slightly bent perhaps?


Reply

Again, this will be hard to explain...can I just mail you guys the lens? Smile

So the aperture lever moves just fine, and moves all the way. The problem is that to close the aperture at say, f/4, it presses down what I would call about 5mm. At f/32 or f/22, however, it has to push down even further...actually down into the lens casing to get it to close all the way. So it's not just open or closed, it's a variable amount of travel depending on the aperture. So the problem becomes the fact when you have a fixed adapter on there. I thought the K-mount would fix it, and it did a little bit, but something is still screwy with closing all the way.

What a pain! Maybe I should just replace it?

-Collin-