MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Fast UV -treatment on yellowed lenses?
View previous topic :: View next topic  


Reply

Hi folks!

I now have two yellowed lenses: Super Takumar 2/35mm and S-M-C Takumar 1.4/50mm. I've been thinking about exposing them to the sun but because it's winter we hardly get any sunshine now.

If I've understood correctly it takes much longer to "de-yellow" a lens using a UV-lamp instead of the sun.

Recently it occurred to me that it might speed things up if I took all the glass (that block UV-rays, "you can't get a tan sitting inside by the window") away from between the UV-source and the yellowed element. I've dismantled the 50mm before because it needed some service when I bought it and I know it's quite easy to get to the yellow glass.

Today I bought 15W "energy saving" UV-lamp and am about to take the lens apart to test my theory.

Has anyone tried this before?

Or is there even enough UV-rays in a regular uv-lamp to do this?

edit: added the word fast to the title


Last edited by ovim on Tue Feb 10, 2009 7:31 am; edited 1 time in total


Reply

I did it many times... here is copy/paste of my post:

Quote:
The cause of the yellow cast is special optical glue (canada balsam oil), which is degradated by the radioactivity from the thoriated glass element. Tomioka used different optical glue for their later lenses (e.g. thorium Yashinon DS-M 50/1.4), which doesn't suffer from this problem.

Anyway, it can easily be reverted. I use 11W UV tube. One month under the tube removes more than 95% of entire color cast.

Before:



and after:



differences in weeks (crops: left: week 0, right: end of week 4. The lower line are crops from the center of the lens and the higher line are crops outside the lens - reference):



The older the lens, the darker cast. 4 weeks are sufficient for newer Super-Multi-Coated and SMC Takumars, but older Super Takumars may require a longer period of bleeching or stroger source of UV rays.

Anyway, 50/1.4 Takumars are way sharper at f/1.4, than 55/1.4 Revuenons, 50/1.4 Yashinons, 50/1.2 Yashinon and other lenses from Tomioka.



http://forum.mflenses.com/super-takumar-50mm-f1-4-t7191,start,30.html#76357
http://forum.mflenses.com/radioactive-lenses-t9389.html#78737

It will take 2-4 weeks with 15W tube. Some people use germicid lamps (100-150W) - the lens is bleached in a few days Smile

Anyway, don't forget to open the iris and irradiate the back element (not the front one) Smile


Reply

Thanks for your reply no-X, after seeing your quote I remember seeing it before (maybe it was your post that gave me the idea in the first place).

But you did it with the lens intact? There is two elements blocking the rays in the rear before the yellowed piece of glass. Because I now have only the yellowed element under the uv-lamp I'm hoping for quicker results.


Reply

Yes, I didn't dismantle them.

Let us know your results Smile


Reply

no-X wrote:
I did it many times... here is copy/paste of my post:

Quote:
...The cause of the yellow cast is special optical glue (canada balsam oil), which is degradated by the radioactivity from the thoriated glass element....


I don't know whether or not the degradation of the optical glue is responsible for the yellow colour in the cases that you describe. However the colouration of various glasses due to ionising radiation is quite a general phenomenon. The so called "colour centres" reside in the glass itself. A google search for "glass colour centre" will provide an entry into the field.


Reply

update: It's been something like 6 hours and it might be working.

I'm sorry about these pictures. I was in so much hurry that I forgot proper documentation.

Well at least they were taken with a Carl Zeiss lens (Vario-Tessar 3.3/4.5-12.4) ... On a Nokia N93 Razz

Out of focus and different WB I know Embarassed

Here's the rear part of the lens (without the mount but with diaphragm) the two (non-yellow) rearmost elements removed.

before:


after:



I'll report back tomorrow hopefully with better pictures (and sober).


Reply

sichko wrote:
no-X wrote:
I did it many times... here is copy/paste of my post:

Quote:
...The cause of the yellow cast is special optical glue (canada balsam oil), which is degradated by the radioactivity from the thoriated glass element....


I don't know whether or not the degradation of the optical glue is responsible for the yellow colour in the cases that you describe. However the colouration of various glasses due to ionising radiation is quite a general phenomenon. The so called "colour centres" reside in the glass itself. A google search for "glass colour centre" will provide an entry into the field.

Quote:
From camera fix mailing list:
Date: Wed, 18 Sep 2002
From: "Mark Stuart" madfamily at bigpond.com
Subject: Yellowed Takumar 50mm f1.4 cure

Hi guys,

I've just visited our local old camera guru repairer who is also a
Pentax buff (has SP through to MZ-S) and was discussing the 50mm
yellow curse. He said with some authority that the problem is not the
element itself that yellows, but the Canada balsam. The radioactivity
causes the problem via its proximity to the balsam, but it's not the
glass that yellows.

He has actually fixed this on a couple of lenses, but unfortunately
it's well outside of economic reality (AU$140). He admitted this, and
said that the owners of the two he's done insisted. Colour rendition
etc. was as per new.

Can any of you pros confirm this? How hard is this to do yourself?

Thanks
Mark

From camera fix mailing list:
Date: Wed, 18 Sep 2002
From: John Barlow BARLOWJG@CHHA.CO.UK
Subject: RE: Yellowed Takumar 50mm f1.4 cure

The best info I have found on replacing the balsam cement in lenses is on
the S K Grimes site @ www.skgrimes.com

The description is for large format lenses but I expect it is ok for all
formats.

John


etc. Wink


Reply

Canada balsam slowly phased out of lens production after WWII, when wartime-developed airplane canopy glues became universally available to the optical industry, and it would be quite surprising to encounter it in a mass produced lens in or after the sixties. The Takumars in question are several cement generations beyond it in age, and were most likely cemented with either UV cured epoxy or cyanacrylate.

Besides, on Aero Ektars, the colouring of the thoriated rear element itself is clearly visible viewing it from the side, so there is little doubt that alpha radiators can yellow or brown glass itself - YMMV as to whether the same happens in the Takumars. But it is not really relevant, as UV will heal the colouring regardless of whether glass or cements are affected.

Sevo


Reply

There are radioactive lenses, which doesn't turn yellow - e.g. Yashinon DS-M 50/1.4 (I had two copies and none of them was affected). But Yashinon 55/1.2 is affected. I think this confirms, that the yellow thing is the optical glue. Either the DS-M use different optical glue, which is immune to radiation, or the lens design doesn't use cemented optical elements (I tried to find the optical diagram, but I wasn't succesful).


Reply

no-X wrote:
I think this confirms, that the yellow thing is the optical glue.


Are you suggesting that all yellowing in camera lenses is due to the optical cement ?


Reply

No. I speak only about Takumars and Yashinons. They have similar level of radioactivity, they use thoriated glass, color cast is almost identical and it takes the same time to bleach them. So it's very likely they are affected by the same issue. But some of the newest models, which are radioactive too, don't turn yellow.

It's logical, that if the source of yellowish color cast would be the glass, than all of these lenses will turn yellow, because all of them use the thoriated glass. But in reality some models are OK. The only logical explanation for me is that the yellow thing in these lenses is the optical glue, which can differ on later models (contrary to the thoriated glass, which is present at all of these lenses - even at those, which don't turn yellow)


Reply

OK. Thanks.


Reply

I undestand the useful explanation given by the companions of the forum. But there is something I do not reach to explain.

I have 2 to pancolars 50/1.8, N° s 10099278 and 10893467. First is " aus jena" (in case it mattered) and I bought and it totally yellow. The second I bought "normal". Why that difference? Both are MC, CZJ, near in the time.

Rino.


Reply

I can't help you, I have never seen any single yellow Pancolar 50/1.8. I'll try to find some explanation...


Reply

no-X wrote:
I can't help you, I have never seen any single yellow Pancolar 50/1.8. I'll try to find some explanation...


Me too! I seen many none of them was yellow. Something strange with your copy.


Reply

I asked a friend of mine. He has several Pancolars 50/1.8 and one of them is yellow. He has measuring devices and according to his measurement the yellow pancolar is radioactive(!)


Reply

no-X wrote:
I asked a friend of mine. He has several Pancolars 50/1.8 and one of them is yellow. He has measuring devices and according to his measurement the yellow pancolar is radioactive(!)



It seems not be another causes. My pancolar is now OK (was at direct sun a pair of days). Thanks No-X



Hi, Attila, see this

http://forum.mflenses.com/q1-in-czj-t14420,start,15.html

It's yellowish and with fungus. But sure will take beauties pícs.

Rino.


Reply

based on Jes' idea ... i made some of these:

5x UV leds ... should be ok to treat yellowing ... but ... i do not have any yellow lenses Rolling Eyes







note that this design can use up to 9 LEDs, but i decided to only use 5 for UV, since i wanted some ultra white LEDs as well, to assure that i am not going to accidentially look into it. UV leds do not appear bright, but may damage your eye.


Reply

Nice lamp hk300, very compact.

My test was a success! It really didn't take long to get the yellow hue off the lens. I kept the yellowed element under the uv light for about 24hrs, but the yellow was already gone after ~10hrs.

heres some more pictures:

Before the uv-treatment. (lens dismantled, only the yellow element and diaphragm) and a clear element from near the yellowed one.


after 24hrs (lens dismantled, only the yellow element and diaphragm) shot against white screen of my laptop.


Comparison shot: my yellowed Super-Takumar 2/35mm (not even as yellow as the 1.4/50mm was) shot against white screen of my laptop.


Reply

Ovim

Why dismantled the lens and put only the yellow element and diaphragm?

UV damage the body of the lens?

Rino


Reply

estudleon: Just for speed. I wanted to know if I can clear the yellowing faster if I took all the other elements away from between the uv-lamp and the yellowed element.

All the elements block uv-rays, so if I take them away all the uv-light goes straight to the yellowed glass (-> faster clearing process).

no-X wrote:

It will take 2-4 weeks with 15W tube. Some people use germicid lamps (100-150W) - the lens is bleached in a few days Smile


Instead of 2-4 weeks I made it in a day Smile


Reply

Ovim: Thank you, very much. Very clear and usefull.

Rino


Reply

I have a UV lamp for industrial hardening here. That thingy blasts out 20.000 mW/cm², so maybe I should open up a lens curing business??


Reply

ovim wrote:
All the elements block uv-rays, so if I take them away all the uv-light goes straight to the yellowed glass (-> faster clearing process).

... with the added bonus that you can leave the glass element outside the house (thus skipping the uv-blocking windows) ... I wouldn't do that with a complete lens, especially with the rain pouring today Very Happy


Reply

I ask, the J-9, so yellowish, have thoriated glass?

Rino.