Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!

SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Lens Cover Replacement Needed
View previous topic :: View next topic  


PostPosted: Sat May 02, 2009 2:52 pm    Post subject: Lens Cover Replacement Needed Reply with quote

I have the Peleng 8mm fisheye with M42 to EOS adapter. I use it quite a bit and I have been very careful not to misplace or loose the lens cover.

Last weekend in NYC I did manage to loose it.

Does anyone know of a place to purchase a replacement. I have searched the Internet without success; mainly I see where others have asked the same question without answer.

If no replacement source is available, does anyone have an idea of how to fabricate a replacement ? The only thought I had was to cover the front of the lens with thin plastic film and make a one piece silicone mold. I worry here about any reaction between the silicone mold material and the MC on the lens.

Any thoughts out there ?


PostPosted: Sat May 02, 2009 3:03 pm    Post subject: Reply with quote

http://www.pbase.com/image/96067942


I found this on pbase, ask the guy who is published.

http://www.pbase.com/pganzel/peleng_fisheye_on_maxxum_7d


PostPosted: Sat May 02, 2009 3:19 pm    Post subject: Reply with quote

Thanks for the quick reply, I posted a comment to him as I am not a PBase member I couldn't get his email addy. I hope he will respond. The $30USD price as of last April is within reason I believe.

Any other answers here will be appreciated in case this lead fizzles out.


PostPosted: Sat May 02, 2009 3:24 pm    Post subject: Reply with quote

I hope your problem will be solved soon.


PostPosted: Sat May 02, 2009 4:29 pm    Post subject: Reply with quote

Another tip ask Alex hk300 , perhaps he able to help.


PostPosted: Fri May 08, 2009 8:27 pm    Post subject: Reply with quote

Attila wrote:
http://www.pbase.com/image/96067942


I found this on pbase, ask the guy who is published.

http://www.pbase.com/pganzel/peleng_fisheye_on_maxxum_7d


Thanks Attila,

I received the cover today and it fits perfectly and snugly. Much better than the original that just barely stayed on.

His email is - peteganzel@lycos.com

I received it within a week.


PostPosted: Fri May 08, 2009 9:56 pm    Post subject: Reply with quote

Great! Good to know this source is works!