MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Canon Giii QL 17
View previous topic :: View next topic  


Reply

I just purchased this little jewel here local for 15.00
The seals are shot and it has a nice dent on the lens filter ring, but everything else looks like new. Shutter works and the lens looks clean and clear. Does anybody know of someone here in the states who is good working on these ?
Thanks for your help !


Reply

Sounds like you just need seals.
You can do those yourself without any prior experience.
With that filter ring dent you are lucky that the shutter and aperture are good.
No way into that lens without unscrewing the front lens trim ring.
It's a great shooter hope you get it up and running Smile


Reply

I have some notes on it at http://rick_oleson.tripod.com/index-30.html ... I have more than that, if you'd like to email me at rick_oleson@yahoo.com.

For seals, the best kits come from Jon Goodman, who sells as "interslice" on eBay. If you would like to contact him directly, I'll give you his email address when you write for the notes.

The shutter itself, other than reaching the blades through the lens openings, is extremely difficult to get to, and so shutter repair per se is pretty much a non-starter. The flip side of that is that I have never once encountered one of these that needed it. The thing that happens most is the blades sticking together, and this can be fixed by removing the glass and cleaning the blades.