MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Vivitar 28 2.5 won't shut aperture on Nikon D1x
View previous topic :: View next topic  


Reply

Hey guys,

I just purchased a Vivitar 28 2.5 via eBay. It's in beautiful condition but the Aperture won't shut down. The Nikon only meters with aperture wide open and won't shut down the aperture as I change it.

Does anyone of you has an idea?

Thanks,

Karhallarn


Reply

Hello,

If I understand you correctly, you won't have any control of the aperture except by manually changing it yourself. The only lenses capable of that are the newer MF lenses that have CPU chips in them (e.g. the Nikkor 45/2.Cool.


Reply

Sounds like it has an "oily" aperture problem, where they don't respond to changes of the aperture ring. Have you verified that they don't stop down with the lens off the camera?. What likely has happened it that the grease used in the focusing helicoid has migrated onto the aperture blades (which are supposed to be bone dry)...You will need to have this fixed either by a repairman or yourself if you are brave enough...


Reply

I can stop it down off the camera. It just wont stop down put on the camera! My soligor mf 135 2.8 just behaves as my newer nikkors in this respect! I turn the aperture ring and the d1x stops it down before ttaking the shit or when i press the depth of field preview. The vivtar just stays open!

The little pin moves down when stopping down the vivitar of the camera and i can push it open by pushing the pin up!

I don't know!


Reply

Went to a local camera store today and they told me that the lens is a non AI model, so it will only work wide open and might even damage my beloved D1x!

Have you got any experiences with Non Ai on digital bodies other than D40/x/60?


Reply

I've used some Non-Ai on a D70s. If it's a Nikkor Non-Ai, don't mount it as it will damage the camera. It's some 3rd party lenses that can be safely mounted as the body doesn't protrude as far past the mount. I have a Spiratone 135mm that mounts & works fine, but then I have an older Vivitar 70-210mm Series One (1st edition) that is too tight to mount...


Reply

Ok, out of not knowing I just mounted the Vivitar yesterday and took some shots with it!

I like it alot and if I understand you right, there shouldn't be a problem if there isn't one until now?!?

How do you meter with the D70?


Reply

You can't meter with MF lenses on a D70s. You have to use the "Sunny 16" rule & chimp with your LCD/Histogram....As far as mounting old Pre-Ai lenses, just don't force them.I usually try to acquire Ai or Ais mount lenses as a rule, but sometimes I may get an older Pre-Ai in a batch...


Reply

Got it!

After purchasing a Tokina rmc 100-300 f5 Non-Ai I experimented a little with both non AIs. You can actually close the aperture!

Turn the aperture ring, the camera meters only wide open. Manually correct the metering and there you go. The Non-Ai lenses shut down the aperture whe taking the shot! They just don't forward the aperture to the camera to help metering!

Set my EV compensation to +1 and put my Tokina to f8 and my Vivitar to f4 and both work absolutely fine!