MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Nikon F
View previous topic :: View next topic  


Reply

An attic find, a Nikon F from 1962 with a Nikkor-S 2/50, which cannot be adapted to an EOS dSLR.


(photo taken with a CZ 1.4/50 at f/11)


(photo taken with a pinhole body cap on 5D, 30s at ISO800. It seems that the sensor needs cleaning Sad This is a down-sampled full frame after some PP.)

Veijo


Reply

vilva wrote:
... with a Nikkor-S 2/50, which cannot be adapted to an EOS dSLR.

Why not?

BTW, I have never seen a sensor that did not look dirty when used with a pinhole. Wink


Reply

LucisPictor wrote:
vilva wrote:
... with a Nikkor-S 2/50, which cannot be adapted to an EOS dSLR.

Why not?)


The aperture ring forms a collar protruding about 2.5mm. This prevents the lens from reaching deep enough to lock in the adapter or even reaching infinity focus on an EOS body. Of course, it would be possible to modify the ring, but I haven't been willing to resort to that as I have many enough fine, usable 50mm lenses.

Veijo


Reply

Ah, OK. I was asking because I have a Nikkor-H 2.0/50 and this one can easily be adapted to EOS.


Reply

vilva wrote:
An attic find, a Nikon F from 1962 with a Nikkor-S 2/50, which cannot be adapted to an EOS dSLR.


(photo taken with a CZ 1.4/50 at f/11)


(photo taken with a pinhole body cap on 5D, 30s at ISO800. It seems that the sensor needs cleaning Sad This is a down-sampled full frame after some PP.)

Veijo


nice camera.


Reply

vilva wrote:
An attic find, a Nikon F from 1962 with a Nikkor-S 2/50, which cannot be adapted to an EOS dSLR.


hm ... perhaps if you modify the adapter itself?
A lot of adapters consist of 2 pieces, the part that installs into the Canon body and one part that mimicks the nikon body mount.